Прошивка планшетов на AllWinner A10 и A13

Инструкции для КПК (PPC)

Модератор: чипега

shurabal
Пользователь
Пользователь
Сообщения: 44
Зарегистрирован: 22.07.2013 18:01
Откуда: волжский

Прошивка планшетов на AllWinner A10 и A13

Непрочитанное сообщение#491 » shurabal » 17.08.2013 17:27

Blaze писал(а):
shurabal, полную резервную копию не сделаете, если CWM не работает.
Сделайте, что написано в пункте: Что необходимо сделать до прошивки. Простой способ подмены модулей (драйверов) в прошивке. Резервная копия рабочих модулей и script.bin
Устанавливаешь Uberizer v1.6, запускаешь, подключаешь к компутеру включеный планшет (я шнуром, а можно и беспроводно). Там (в Uberizer_е) поочередно жмешь "а" - определение марки планшета
запускаю прогу,но она не видит планшет,висит на поиске девайса.(опарат включен)
дрова установены,так как прошиваю без проблем

Аватара пользователя
Blaze
Информатик-аналитик
Информатик-аналитик
Сообщения: 8925
Зарегистрирован: 24.05.2007 17:23
Модель телефона: Redmi 7
Прошивка: Android 9
Sat-ресивер: Tiviar Mini HD
Откуда: Данков
Контактная информация:

Прошивка планшетов на AllWinner A10 и A13

Непрочитанное сообщение#492 » Blaze » 17.08.2013 19:11

Удалите драйвер из диспетчера устройств и подкиньте драйвер из папки Uberizer для Allwinner

shurabal
Пользователь
Пользователь
Сообщения: 44
Зарегистрирован: 22.07.2013 18:01
Откуда: волжский

Прошивка планшетов на AllWinner A10 и A13

Непрочитанное сообщение#493 » shurabal » 17.08.2013 21:07

Blaze писал(а):Удалите драйвер из диспетчера устройств и подкиньте драйвер из папки Uberizer для Allwinner
всё спасибки,это помогло,но вот когда просят нажать на 8 для сохранения на комп и 12 для заливки в планшет, у меня всего 5
Uberizer v1.4 стоит Uberizer v1.6 не нашёл,в описании в шапке ссылка не активна

Shakhid-Shakh
Интересующийся
Интересующийся
Сообщения: 15
Зарегистрирован: 16.08.2013 17:19
Откуда: Махачкала

Прошивка планшетов на AllWinner A10 и A13

Непрочитанное сообщение#494 » Shakhid-Shakh » 17.08.2013 21:24

не подскажите где можно посмотреть какой контроллер тачскрина стоит на планшете?

Аватара пользователя
Blaze
Информатик-аналитик
Информатик-аналитик
Сообщения: 8925
Зарегистрирован: 24.05.2007 17:23
Модель телефона: Redmi 7
Прошивка: Android 9
Sat-ресивер: Tiviar Mini HD
Откуда: Данков
Контактная информация:

Прошивка планшетов на AllWinner A10 и A13

Непрочитанное сообщение#495 » Blaze » 17.08.2013 21:31

shurabal, ссылка в шапке на Uberizer v1.6 работает - вот зеркало

Shakhid-Shakh вообще, если планшет загружается, то с помощью Android Terminal Emulator введите команду: Скопируйте содержимое лога команды в данную тему.

shurabal
Пользователь
Пользователь
Сообщения: 44
Зарегистрирован: 22.07.2013 18:01
Откуда: волжский

Прошивка планшетов на AllWinner A10 и A13

Непрочитанное сообщение#496 » shurabal » 17.08.2013 22:10

Blaze писал(а):shurabal, ссылка в шапке на Uberizer v1.6 работает - вот зеркало
ещё раз большое спасибо,всё прошло удачно.
и последний на сегодня вопрос в папке и с прогой появилась папка backups,что в ней находится и как ими пользоваться?
(на случай если мне надо)

Shakhid-Shakh
Интересующийся
Интересующийся
Сообщения: 15
Зарегистрирован: 16.08.2013 17:19
Откуда: Махачкала

Прошивка планшетов на AllWinner A10 и A13

Непрочитанное сообщение#497 » Shakhid-Shakh » 17.08.2013 23:29

установить программы на этот планшет оказывается проблематично, через WiFi спокойно находит необходимое приложение, но не устанавливается, бежит шкала ожидания загрузки и так намертво бежит себе, через компьютер напрямую тоже не устанавливается...
да и Bluetooth нет в этой прошивке... хотя модуль Bluetooth имеется...
и камера выдает ошибку...

Добавлено спустя 1 час 9 минут 47 секунд:
в общем подошла прошивка F918-WCDMA-20130423.1.1.11-a106-dou0308.img

но не работает в нем камера, выдает ошибку: В приложении "Камера" произошла ошибка.

но вопрос с тачскрином еще открыт, думаю еще поискать прошивку

Код: Выделить всё

app_44@android:/ $ lsmod
8192cu 575495 0 - Live 0xbf1a6000
dmard06 9014 0 - Live 0xbf0f1000
mma7660 9620 0 - Live 0xbf0e3000
rtl8150 8910 0 - Live 0xbf0dc000
mcs7830 6557 0 - Live 0xbf0d6000
qf9700 8513 0 - Live 0xbf0cf000
asix 22500 0 - Live 0xbf0c4000
sun4i_csi0 29432 0 - Live 0xbf0b8000
gt200535 30016 0 - Live 0xbf0ab000
gc0308 14998 1 - Live 0xbf0a3000
videobuf_dma_contig 5659 1 sun4i_csi0, Live 0xbf09e000
videobuf_core 18067 2 sun4i_csi0,videobuf_dma_contig, Live 0xbf094000
cedarx 11815 0 - Live 0xbf08d000
mali 130321 8 - Live 0xbf060000
ump 42294 15 mali, Live 0xbf04f000
sun4i_vibrator 2286 0 - Live 0xbf04b000
mic_keypad 2022 0 - Live 0xbf047000
ft5x_ts 46394 0 - Live 0xbf036000
gt813_827_828 12449 0 - Live 0xbf02e000
nt11003 8679 0 - Live 0xbf027000
es8388 4977 0 - Live 0xbf022000
nand 105401 8 - Live 0xbf000000
app_44@android:/ $

Аватара пользователя
razvalchik
Пользователь
Пользователь
Сообщения: 31
Зарегистрирован: 29.09.2012 7:20
Модель телефона: Vowney V5 Quadcore
Прошивка: Mod R2 04/07/2013
Откуда: Минск

Прошивка планшетов на AllWinner A10 и A13

Непрочитанное сообщение#498 » razvalchik » 18.08.2013 1:52

А у меня после прошивки моего L36 ( а может был такой и до, но обратил внимание только сейчас ) экран какой-то темноватый. Регулятор до максимума - всё равно мало яркости! Может кто подскажет как програмно увеличить яркость свечения дисплея/подсветки?
Если каждый день ходить на работу, то некогда будет зарабатывать деньги! Дж. Д. Рокфеллер

Аватара пользователя
Blaze
Информатик-аналитик
Информатик-аналитик
Сообщения: 8925
Зарегистрирован: 24.05.2007 17:23
Модель телефона: Redmi 7
Прошивка: Android 9
Sat-ресивер: Tiviar Mini HD
Откуда: Данков
Контактная информация:

Прошивка планшетов на AllWinner A10 и A13

Непрочитанное сообщение#499 » Blaze » 18.08.2013 10:50

shurabal, вот что может делать Uberizer, в опции d ваш ответ

Код: Выделить всё

Uberizer main menu overview:
 a. Analyse / detect device
 b. Build Menu
 c. Root Menu
 d. Backup Menu
 e. Bootanimation Menu
 f. Multi Mod Tool Menu
 g. Application Manager Menu
 h. Help me
 i. A1X Firmware Menu
 j. Install full market
 k. Various Menu
 l. Files to SD
 m. Donate to TechKnow
 o. Open Uberizer directory
 p. WiKey, PC Keyboard to Android Device
 q. Quit
 r. Reboot device
 s. System analyzer
 t. Install TechKnow ToolKit to device
 u. Update Uberizer
 w. Wireless Uberizer mode
 x. Install Virtual OldPC 95 to device
 z. ZDiR


Uberizer main menu details:
a. Analyse device (find model)
- Rescans for a device, use this after connecting another android device to your computer.

b. Build Menu                             
 + 1.Auto Mod build.prop               
   * Automatically adds several build.prop tweaks and enhancements.
 + 2.Edit build.prop and push it back   
   * A handy way to quickly check or edit a few build properties.
 + 3.Market build.prop fixes           
   * Strips out the current market fingerprint and copies the modded build.prop to the
     device. Currently this emulates a Samsung for full market (Google Play) access.
 + 4.Backup current build.prop on device
   * Dumps a copy of your build.prop to \backups, the prop dump name includes your model
     name, the current date and time of dump. To easily restore these backups, run 5.
 + 5.Restore a build.prop backup
   * Indexes all backupped build.prop files on the system and allows the user to chose
     which file (s)he wants to restore on the tablet.

c. Root Menu
 + 0.HcH's Brute-Root (recommended) 2.x-4.x (tested on google_sdk/a13/wm8850)
 + 1.Android 1.6 Donut (tested on WM8505)   
 + 2.Android 1.6 Donut MAA (tested on WM8505)
 + 3.Android 2.2 Froyo (WM8650)             
 + 4.Android 2.3 GingerBread (WM8710)       
 + 5.Android 3.0 HoneyComb                   
 + 6.Android 4.0 ICS (tested on A13)         
 + 7.Android 4.0 ICS MIPS (tested on Ainovo)
 + 8.Android 4.0 ICS (tested on WM8850)     
 + 9.Android 4.0 ICS v2                     
 + 10.Android 4.0 ICS HTC (alpha)
 + 11.Backup current root bin and su app     
    * Backups the system\(x/s)bin\su bins and superuser.apk to \backups\system (x/s)bin and \app
 + 12.Restore root backup                   
    * Writes the \backups su bins and superuser.apk back to the device.
 + 13.Unroots device                         
    * Removes su bins and superuser from device and sets default back.
 + 14.Check device root
    * Installs and starts the latest free version of Joey Krim's Root Checker

 d. Backup Menu                           
 + 0.Full device "unmod" backup to backups\%MODEL%_%DATE%_%TIME%
   * Creates a set of files that the uberizer tries to mod on your android device.
 + 1.Backup build.prop to backups\           
   * Dumps a copy of your build.prop to \backups, the prop dump name includes your model
     name, the current date and time of dump. To easily restore these backups, run 5.
 + 2.Restore build.prop                     
   * Indexes all backupped build.prop files on the system and allows the user to chose
     which file (s)he wants to restore on the tablet.
 + 3.Backup bootanimation.zip to backups\   
   * Dumps a copy of your bootanimation to backups\bootanimation.zip
 + 4.Restore bootanimation.zip               
   * Displays a selection menu of bootanimation.zips from \backups and pushes the animation to your android device.
 + 5.Backup data\ to backups\data.tgz       
   * REQ ROOT. This will backup your full /data partition, very nice to backup all your
     downloaded apps with their settings if you are planning to reflash your device.
 + 6.Backup data\app to backups\data_app.tgz
   * REQ ROOT. This will backup only data\data\apps, your "downloaded" apps. Very useful
     for sharing apps with your friends or when you are planning to reflash your device.
 + 7.Backup data\data 2 backups\data_data.tgz
   * REQ ROOT. This will backup only all the app settings on your device.
 + 8.Restore 5. data.tgz backup             
   * Easily restore backups done with option 5.
 + 9.Restore 6. data_app.tgz backup         
   * Easily restore backups done with option 6.
 + 10.Restore 7. data_data.tgz backup         
   * Easily restore backups done with option 7.
 + 11.Backup current root bins and su app     
    * Backups the system\(x/s)bin\su bins and superuser.apk to \backups\system (x/s)bin and \app.
 + 12.Restore backed up root bins and su app 
    * Writes the \backups su bins and superuser.apk back to the device.
 + 13.Backup hosts file                       
    * Backups your current hosts file of your device to backups\hosts_%date%_%time%.
 + 14.Restore hosts file                     
    * Easily restore a previously backupped hosts file.
 + 15.Backup init files to backups\init.tgz   
    * This will take all init rc files from your device and stores them into \backups seperately,
      but also this will make a tgz of the original files. This tgz is easy to recover using
      option 16, because it's a tgz the original attributes remain. You can mod the seperately
      dumped init files and adb shell chmod 750 them when you push them back.
 + 16.Restore init files backups\init.tgz     
    * Brings up a selection menu to easily select your previously created init backup.

 e. Bootanimation Menu                     
 + 1.Backup current bootanimation.zip
   * Dumps a copy of your bootanimation to backups\bootanimation.zip.
 + 2.Copy new bootanimation.zip
   * Write back backups\bootanimation.zip to your android device.
 + 3.Delete bootanimation.zip on device
   * This removes the bootanimation.zip from your device, this might slightly improve your
     boot time.
 + 4.Recover backed up bootanimation.zip
   * Brings up a selection menu with current backed up bootanimation.zip files in \backups.

 f. Multi Mod Tool Menu                   
 + 1.undex (baksmali)
   * Undex amm_files\undex_input_files\classes.dex to undex_output_files.
 + 2.dex (smali)
   * Rebuilts dex from \dex_input_files and writes to dex_output_files.
 + 2a.dex (smali) dex default undex output dir
   * Rebuilts dex from \undex_output_files\out and writes to \dex_output_files.
 + 3.Jar maker
   * Creates one .jar file from \jarmaker_input_files dir, a generated .jar file will appear in jarmaker_output_files.
 + 3a.Jar maker using existing meta-inf\manifest.mf
   * Creates one .jar file from \jarmaker_input_files dir, a generated .jar file will appear in jarmaker_output_files with manifest.mf.
 + 4.APK sign (batch-mode)
   * HcH's Microsigner, a simple way to sign a load of apks from \amm_files\apksign_input_files\ to \amm_files\apksign_output_files\.
 + 5.Update.zip maker
   * Creates simple update.zip file. Input dir \updatezip_input_files, Output zip file will be written in \updatezip_input_files
 + 6.Jarsigner
   * A tool to sign jar files, certs/keys included! Input file: \amm_files\jarsigner_input_files\unsigned.jar
 + 7.OptiPNG
   * Optimize those PNG files for maximum loading speeds! Dump all your pngs in optipng_files and run this option.
 + 8.framework-res.apk OptiPNG (alpha)
   * A attempt to automatically optimize a framework-res.apk. This rebuilts the framework and signs it.
 + 9.batch extract and decrypt manifest from apks in \aapt_input_files
 + 10.batch generate APK application details from apks in \aapt_input_files
 + 11.batch generate APK extreme details from apks in \aapt_input_files

 g. Application Manager Menu               
 + 1.Batch install apps (from \install_apk)
   * This installs all the apk files you have stored in \install_apk on your device.
 + 2.Install1app (select from \install_apk)
   * This brings up a selection menu of all the apk files you have stored in \install_apk on your device. You can select one you want to install.
 + 3.Backup system apps to backups\sysappstgz
   * Backups the system apps of your device to backups \system_apps.tgz
 + 4.Backup data apps to backups\data_appstgz
   * Backups the data apps of your device to backups \data_apps.tgz
 + 5.Restore 4. data apps package to device
   * This easily restores a previously created backup with option 4
 + 6.Backup 1 app to backup\ .apk
   * Creates a list of all your downloaded apps, enter the generated number of the app
     you wish to backup, and the app will be downloaded to \backups.

 h. Help me
   Connecting Wireless/Driverless (ROOT REQUIRED!):
   1.Go to the Wireless Menu (w)
   2.Enable Wireless ADB using ONE of these options: 2, 4 or 5, whichever is most easy for your situation.
   3.If you use an app (4 or 5), start the app on your Android device.
     Use option 6 to connect to the given IP in the app.
     If you chose option 2, you must find your device IP, go to Settings, About device, Status, to see the IP.

   Connecting Wired/Driver:
   1.Install ADB drivers (from dir usb_driver) for wired ADB
   2.Boot Android, connect device (on the device, the statusbar will display "usb debugging mode is activated")
   3.Run this tool, analyse device so this tool can seek info of your device
     and will check if your model is supported by mods
                           
 i. A1X Firmware Menu                     
 + 1.IMG unpacker
   * unpacks rom_kitchen\original.img, the main files are stored in _input.
 + 2.IMG packer (rom_kitchen\_input)
   * rebuilts your modded files that are previously extracted to a IMG file (output.img)
 + 3.Dump A1X firmware to Uberizer dir
   * this will dump your A10 or A13 firmware in a sub directory of Uberizer.
 + 4.Restore A1X firmware from \rom_dumps
     Restore a previously created rom dump with option 3. Special Thanks to Satcomranger for risking his tablet's life and coding fixes for the procedure.
 + 5.Start LiveSuit Pack v1.11
     Start LiveSuit for manual flashing or formatting your A10/A13 device
 + 6.Alternative IMG unpacker (by RedScorpio)
     Brings up a IMG selection MENU that lists all IMG files in uberizer\rom_kitchen\_input for extraction.
     The unpacked ROM will be stored in \rom_kitchen\_input\%ROMNAME%.DUMP\*, edit / modify the data, leave it in this directory!
     Then run option 7 to repack it!
 + 7.Alternateive IMG repacker (by RedScorpio)
     Brings up a selection MENU for .DUMP directories, select a number to rebuild the IMG from this directory.
     If the original IMG file still exists while you're making the new ROM it will be renamed to .bak. A IMG file with the same
     name as the directory will be output in: \rom_kitchen\_input\
 + 8.Dump script.bin (to uberizer root dir)
     This command remounts the boot fs so it can pull the script bin from your device. The script bin contains valuable information about touchscreen and other hardware specs. This procedure is recommended before flashing A10 or A13 devices.
 + 9.Convert script.bin to script.fex
     Converts the dumped script.bin into a fex file so you can edit it.
 + 10.Edit script.fex
     Brings up WinVi32 and let's you modify the converted bin fex file.
 + 11.Script.fex to bin converter
     Before you can use the modified bin you need to convert it back into a bin file with this command.
 + 12.Push converted script.bin to device
     Writes back the modified script.bin to your device, reboot and the effects should be active.

 j. Install full market       
 + installs a hacked market apk with unrestricted market access, plus fake
   the fingerprint of galaxy tab to gain more access. NOTE: if you have a
   different cpu model than armeabi-v7a, like mips for example, you won't
   see all available apps, you will see everything fit for your
   "product.cpu.abi", you can see your cpu in the build prop (option b/2)

 k. Various Mods Menu                     
 + 1. Sync device FS
   * syncs android device's FS, for safe shutdown for example.
 + 2. Clean Dalvic Cache
   * cleans the dalvic cache
 + 3. Add Tar 1.23 bin (auto backups old)
   * this adds the real deal TAR binary to your android device!
 + 4. Install anti ad and malware hosts file
   * adds the MVPS hosts file to protect you against the most known malware servers.
 + 5. Add GREP/EGREP/FGREP 2.6 bins
   * adds the GREP binaries to your android device, enjoy full grep functionality!
 + 6. Add PHP v5.3.2 and Groomdroid webserver
   * copies needed files and installs a PHP pre-configured Groomdroid web server.
 + 7. ICS Screen Capture to /screenshots
   * takes a screenshot of your screen and stores it in /screenshots
 + 8. Add Capture ICS bin to device
   * adds the ICS capture bin to your device, EXPERIMENTAL FEATURE . UNTESTED
 + 9. Add bash 4.1 bin to device
   * for those Shell Ninjas out there, here it is ... BASH 4.1 on android!
 + 10. Config Groomdroid on device
   * easily edit your config.
 + 11. Auto Market and Framework Cache clean
   * performs the "market flush" for you.
 + 12. System App Remover (with auto backup)
   * Makes a list of all the system apps with numbers, input the prefixed number and
     the system app will be automatically backed up to /backups/%APKNAME%_%DATE%_%TIME%
 + 13. System App Restore
   * With this option you can restore previously removed system apps.
 + 14. Remove Phone (with auto backup)
   * This option will remove phone.apk and TelephonyProvider.apk from /system, without
     any extra switches this will backup the removed items.
 + 15. Realtime LOGCAT Monitor 1024x768
   * Starts a new command prompt window fit for 1024x768 resolution.
 + 16. Dump LOGCAT to TXT file
   * Dumps the LOGCAT output as a TXT file in the Uberizer dir. After the dump has
     completed, WinVi editor will open the generated TXT file.
     Output file example: LOGCAT_npm702_NOVO7PALADIN_20122511_0202.txt
 + 17. Generate full device and bug report
   * Dumps dumpsys, dumpstate, and logcat to a TXT file in the Uberizer dir. After
     the dump has completed, WinVi editor will open the generated TXT file.
     Output file example: BUGREPORT_npm702_NOVO7PALADIN_20122511_0205.txt
     NOTE: This dump can take quite a while. If your device has vibration it will go
     off once at the start of the dump and will go off twice when it's completed.
     This dump can take up to one minute to complete.
 + 18. Dump DMESG (Diagnostic messages) to TXT
   * Dumps out of DMESG in the Uberizer dir and opens the output file in WinVi,
     Output file example: DMESG_npm702_NOVO7PALADIN_20122511_0234.txt
 + 19. Fix /data/local permissions
   * Needed on some ICS roms when ADB installation fails.
 + 20. Backup and remove batterystats.bin
   * Handy for re-calibrating your battery. Batterystats is file that actually follow
     the usage of power by android apps. However, some problems conserning calibration
     and indication can relate to this file.
 + 21. Backup and remove Unlock Pattern
     Simply removes the settings.db so you can use your device again.
 + 22. Enter device's ADB shell
     For all the shell ninja's out there
 + 23. Enter device's ADB shell (remountmode)
     This remounts data system and root to be read write, consider this option as
     browsing under root privileges, be careful what you mod! After you have closed
     this shell session, the remounts remain active in the adb session. In other words
     if you have problems modding your build prop for example, run this option, close it
     and retry, good chance you can now edit system files.
 + 24. Edit init.rc and push back
     For pro's only, allows you to modify your init.rc and copy the modified init.rc back
     to your device. Handy for developers who are debugging.
 + 25. Edit init.%MODEL%.rc and push back
     For pro's only, allows you to modify your init.rc and copy the modified init.rc back
     to your device. Handy for developers who are debugging and people who have problems
     with touch screen or gsensor on sun5i / a13 models to swap drivers.
 + 26. Clean dalvik-cache
     Deletes everything in the dalvik-cache, reboot is required after this procedure, so
     the system can rebuilt the cache on boot.

 l. Files to SD (extsd)       
 + This will write files from \files_to_sd to your device /mnt/extsd or /sdcard

 m. Donate to TechKnow                     
 + How very kind of you to consider!

 p. WiKey, PC Keyboard to Android Device:
* old screenshot, the included version of this keyboard also has swipe left - right on it!

 q. Quit                                   
 + A very common command that should not require explanation. However, quitting the
   Uberizer cleans up it's temporary files and shut downs the adb server properly.

 r. Reboot device                         
 + While your device is connected you can reboot it to see if certain mods are accepted
   or other testing purposes. Uberizer will play pong with itself until your ADB is back online.

 s. System analyzer
 + Analyzes connect Android devices and give a true load of information about anything like processor, ram, memory, storage, modules. Dumps a text file in the Uberizer root directory with all your device's system specs.

 t. Install TechKnow ToolKit to device:
+ TechKnow ToolKit Features v2.0:
   * WM8505 Analyzer
   * A10 / A13 Dump Firmware to SD
   * A10 / A13 Pull and Push script.bin
   * Shutdown
   * Reboot
   * Reboot into Recovery
   * Hidden feature
   * Wireless Uberizer / ADB control panel
   * LogCat viewer (plus write log to SD function)
   * Error LogCat viewer (plus write log to SD function)
   * Root Check
   * BusyBox Check
   * Analyser
   * WM Analyser
   * Remount FS RW
   * IP Config

   TechKnow ToolKit Function overview:
 + Wireless Uberizer / ADB control panel
   Enjoy the wonders of wifi running driverless ADB to your computer. This way, you can also use the Uberizer Wireless to manage your device! (root is required for this function)
 + WM8505 Analyzer
   Before you flash your WM8505 be sure to run this tool! It will save essential recovery information in the case you flash the wrong ROM! With some extra command and the created text file by this function you can easily fix your non function touch screen, no sound and crashes on the camera for example!
 + A10 / A13 Dump Firmware to SD
   Before you flash any A1X device, it is most wise to make a backup of your current firmware. The bootloader, recovery, system, etc will be written to your SD card, make sure you have one present at the time of dumping!
 + Shutdown, Reboot and Reboot into Recovery
   On the MK802 and the MK808 we don't have a nice shutdown function. This results in losing data after a reboot due the FS didn't synchronize when you powered off. Apps can get lost and data will be lost when you disconnect the power. These functions safely sync the FS and try to shutdown your device. Root access is required.
 + A10 / A13 Pull and Push script.bin
   The script.bin file of the A1X models contains essential information of your device's configuration. With this function, you can very easily recover from a bad flash in most cases. Make sure you run this command before you write the new firmware!
 + LogCat viewer (plus write log to SD function)
   Easily view your logcat for debugging problems. This option also offers you to dump the logcat output to your SD for further investigation on your desktop or to topic the logcat output on TechKnow so the TechKnow Technicians can investigate your problem with all the required details.
 + Hidden Feature
   I'm sure you'll quit looking for it.
 + Root Check
   Simply asks superuser permissions, real handy to have when you're developing a ROM or when you are trying to root your device using the Uberizer to test superuser permissions. This also outputs the error on the su command.
 + BusyBox Check
   We can not live without BusyBox, it will expand your device functionality greatly and it's required for some apps, such as the TechKnow ToolKit. This command simply checks if a busybox bin is present, then it displays what version is available. However, do note that this output does not mean busybox is properly installed. Some devices require you to execute "busybox --install" to get in the system, be warned however, there are reports of members losing root access by installing busybox. Busybox carries it's own su binaries which could overwrite the ones your firmware require!
 + Analyzer
   Generating a device report was never this easy! This option also offers the user to write the report to SD, so the user can topic the analyser output for specifications when requesting help/firmware etc. Details include: cpu info, partition info, build.prop and much more! NEW in v2.0: Extended partition/FS/module info.
 + WM Analyzer
   A must have for anyone thinking of installing a Universal WonderMedia Uberoid version. This functions allows you to save the essential parameters of your device and for 8850's it will tell which FWC (model) you will need to flash! Always write the output of the WM Analyser to your SD BEFORE installing Uberoid will ensure you won't have problems that can not be fixed after flashing.
 + Remount FS RW
   Devices such as the 8850 have the system set to RO, this is due security measures which are fine. However, sometimes you will need to remount the FS RW so you can edit some files. This function tries to remount your system, it works on my devices but it's possible this function will not work on all devices.
 + IP Config
   Shows your IP easily without having to go to all those menus.

 u. Update Uberizer                       
 + Connects to TechKnow and downloads the latest version, and installs it over itself.

 w. Wireless Menu
 + 1. Help and HowTo
   * Short intro and HowTo on connecting your device
 + 2. Enable Wireless ADB through wired ADB
   * When you are already ADB connected, you can start Wireless mode
 + 3. Disable Wireless ADB
   * Wired or wireless, disables Wireless ADB server
 + 4. Wired install of Wireless ADB APP
   * Install a ADB APP of choice to your device (2 loaded)
 + 5. Copy Wireless ADB APP to SD
   * Prepare a SD card for the Uberizer
 + 6. Connect
   * Connect your device to your computer/uberizer to use it. Your IP-address and you can specify
     if desired a custom port, default port = 5555, leave the default port empty to use 5555.

 x. Install Virtual OldPC 95 to device     
 + This will copy the oldpc95 hd image with dos6.22, win2.3, win3.11 and win95, with 17 small games.
   Run this image using the slightly modified aDosBox that will be installed with this command. To
   enhance the screen quality, go to menu, sdl settings, video settings and select smooth the video.
   A reboot is required, if your device is powerful enough you will have no delays. To start Win3.11
   or 2.1 or Dos 6.22, on booting the dosbox image hit F5 and select option 5 from the boot menu, or
   exit windows to command prompt in the shutdown menu. Run "autoexec" once you are in the prompt and
   a helpful menu with the games will appear.
Shakhid-Shakh, читай пункт Что необходимо сделать до прошивки. Простой способ подмены модулей (драйверов) в прошивке. Резервная копия рабочих модулей и script.bin
modules и script для прошивки F918-WCDMA-20130423.1.1.11-a106-dou0308.img (теперь работает камера)
Модуль тачскрина ft5x_ts. Вообщем замените все модули, скопировав из папки modules в директорию планшета /vendor/modules/
с помощью Uberizer скопируйте в корень папки Uberizer файл script.bin, запустите Uberizer и введите:
i, затем опцию 12 (загрузить сконвертированный script.bin в устройство)

razvalchik, попробуйте приложение ScreenAjuster_16_Rus.apk

shurabal
Пользователь
Пользователь
Сообщения: 44
Зарегистрирован: 22.07.2013 18:01
Откуда: волжский

Прошивка планшетов на AllWinner A10 и A13

Непрочитанное сообщение#500 » shurabal » 18.08.2013 12:50

если бы ещё это всё на русском языке было бы(не шарю в англиском) переводчик не всё понятно переводит

Ответить