Прошивка планшетов MID M7206, M799ca на чипах InfoTMIC x210

Инструкции для КПК (PPC)

Модератор: чипега

Аватара пользователя
kep58
Начинающий
Начинающий
Сообщения: 5
Зарегистрирован: 22.02.2013 19:27
Откуда: Кременчуг

Re: Прошивка планшетов MID M7206, M799ca на чипах InfoTMIC x

Непрочитанное сообщение#551 » kep58 » 23.02.2013 14:21

Blaze. Прошил, вынул карту, планшет перезагрузился и все, висит на заставке android с мигающим курсором. Ждал больше 20 минут, все равно висит. Выключил, включил по новой, тоже самое висит. После прошивки нужно вставлять карту и с какой информацией?

Аватара пользователя
Blaze
Информатик-аналитик
Информатик-аналитик
Сообщения: 8925
Зарегистрирован: 24.05.2007 17:23
Модель телефона: Redmi 7
Прошивка: Android 9
Sat-ресивер: Tiviar Mini HD
Откуда: Данков
Контактная информация:

Re: Прошивка планшетов MID M7206, M799ca на чипах InfoTMIC x

Непрочитанное сообщение#552 » Blaze » 23.02.2013 15:32

kep58, на этом сайте написано как восстановить sawee10 с 9v
Ссылка: windows8.altervista.org/2011/09/restore-sawee10/

Прошивка: 9v_600.rar (прошивать через компьютер с Windows XP 32 бит через программу iuw1.2)
U0 – u-boot-nand.bin не прошивайте!!!

стёпа, пробуйте прошивку TKT4.0

стёпа
Начинающий
Начинающий
Сообщения: 4
Зарегистрирован: 22.02.2013 16:16
Откуда: Шадринск

Re: Прошивка планшетов MID M7206, M799ca на чипах InfoTMIC x

Непрочитанное сообщение#553 » стёпа » 23.02.2013 16:54

А где её скачать? В ваших ссылках не скачивает...

___________________________
Обновил ссылки в шапке сайта.

Аватара пользователя
kep58
Начинающий
Начинающий
Сообщения: 5
Зарегистрирован: 22.02.2013 19:27
Откуда: Кременчуг

Re: Прошивка планшетов MID M7206, M799ca на чипах InfoTMIC x

Непрочитанное сообщение#554 » kep58 » 25.02.2013 14:41

Blaze. Комп не видит планшет, уже по всякому пробовал.Через карту прошивается, но стоит на заставке android с мигающим курсором. До меня планшет был у трех мастеров, наверное его уже не восстановишь.

Аватара пользователя
Blaze
Информатик-аналитик
Информатик-аналитик
Сообщения: 8925
Зарегистрирован: 24.05.2007 17:23
Модель телефона: Redmi 7
Прошивка: Android 9
Sat-ресивер: Tiviar Mini HD
Откуда: Данков
Контактная информация:

Re: Прошивка планшетов MID M7206, M799ca на чипах InfoTMIC x

Непрочитанное сообщение#555 » Blaze » 25.02.2013 19:06

kep58, нашел еще пару прошивок для FlyTouch 3 / SuperPad III 4 Gb с питанием от 9 Вольт и Красный светодиод!
1. sawee10_9v_10_4G__V1.9_2070
2. 0905_4G_512M_30M
3. Android P1001R версия андроид V2.3 2011-11-24 (001112)
4. 4G+512--20110430 576
5. 4-512m600
6. software for x600 SP III

mihalych77
Начинающий
Начинающий
Сообщения: 8
Зарегистрирован: 25.02.2013 18:23
Откуда: Россия

Re: Прошивка планшетов MID M7206, M799ca на чипах InfoTMIC x

Непрочитанное сообщение#556 » mihalych77 » 27.02.2013 0:02

Здравствуйте!
Валялся долгое время дохлый китовый планшет 7' m009f проц tm210.Не на какие комбинации кнопок не реагировал , только при включении адаптера питания загорается красный светодиод . Немного покапавшись внутрях эт чуда нашел что нет питания 5 в и 3.3 в , (inn9182) , сваял провод usb и о чудо он включился (зелеый свдиод) правда на экран ничего нет, но воткнутая флеха начала мигать( позже обнаружил на ней пустую папку LOST.DIR) . Попытки прошить его различными методами ни к чему не привели.После всего я решил подключиться по UART вот лог загрузки

Код: Выделить всё

U-Boot 2009.08 (12԰T 05 2011 - 14:22:32)
Shanghai InfoTM Microelectronics Co., Ltd.

Memory type: DDRII 256 MB, E0E0F100E14151613
NAND: ECD5NAND ID: ec d5 84
Assigned as K9GAG08U0E
, 2048 MiB(Samsung)
NAND DL: 280
Using embedded environment.
Battery: 603
, AdapterIn: 1
Console devices(i/o/e): serial, serial, serial
MMC: 1
IMAP_SDHCI1: 1
No ethernet found.
Usage:
MMC sub system
Try booting from SD ...
Card did not respond to voltage select!
Card did not respond to voltage select!
Invalid boot SD!
Hit anynan key to stop autoboot:  0
Try load Image from NAND...
iMAP NAND: 1 bit ECC error, corrected.
iMAP NAND: 1 bit ECC error, corrected.
OEM NAND read finished.
iMAP NAND: 1 bit ECC error, corrected.
iMAP NAND: 1 bit ECC error, corrected.
iMAP NAND: 1 bit ECC error, corrected.
iMAP NAND: 3 bit ECC error, corrected.
iMAP NAND: 1 bit ECC error, corrected.
iMAP NAND: 1 bit ECC error, corrected.
iMAP NAND: 1 bit ECC error, corrected.
iMAP NAND: 1 bit ECC error, corrected.
iMAP NAND: 2 bit ECC error, corrected.
\\
и так много раз ))
iMAP NAND: 1 bit ECC error, corrected.
OEM NAND read finished.
Image Ready! Load address = 0x40008000
Booting linux(normal) ...
Try load Image from NAND...
OEM NAND read finished.
iMAP NAND: 1 bit ECC error, corrected.
iMAP NAND: 1 bit ECC error, corrected.
\\
iMAP NAND: 1 bit ECC error, corrected.
iMAP NAND: 1 bit ECC error, corrected.
OEM NAND read finished.
Image Ready! Load address = bdinfo
## Booting kernel from Legacy Image at 40007fc0 ...
   Image Name:   Linux-2.6.35.7-infoTM
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2624896 Bytes =  2.5 MB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 40ffffc0 ...
   Image Name:   hRamdisk
   Image Type:   ARM Linux RAMDisk Image (uncompressed)
   Data Size:    176521 Bytes = 172.4 kB
   Load Address: 41000000
   Entry Point:  41000000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Linux version 2.6.35.7-infoTM (root@jiangping-desktop) (gcc version 4.4.0 (GCC) ) #402 Mon Jan 9 13:45:24 CST 2012
[    0.000000] CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387f
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: IMAPX200
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Ignoring unrecognised tag 0x54410008
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] CPU IMAPX200 (id 0x13ab2000)
[    0.000000] IMAP Clocks, (c) 2009 Infotm Micro Electronics
[    0.000000] IMAPX200: PLL CLOCKS, APLL 1584.000 MHz, DPLL 480.000 MHz, EPLL 432.000 MHz
[    0.000000] IMAPX200: CPU_CLK 792.000 MHz, HCLK 132.000 MHz, PCLK 66.000 MHz
[    0.000000] iMAPx200: 67108864 bytes SDRAM reserved for memalloc at 0x4102c000
[    0.000000] IMAP Power Management, Copyright 2010 Infotm
[    0.000000] Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 65024
[    0.000000] Kernel command line: console=ttySAC3,115200 androidboot.mode=normal hwver=0.2.3.3 androidboot.mode=normal
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 256MB = 256MB total
[    0.000000] Memory: 188252k/188252k available, 73892k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xfde00000 - 0xffe00000   (  32 MB)
[    0.000000]     vmalloc : 0xd0800000 - 0xefe00000   ( 502 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .init : 0xc0008000 - 0xc0029000   ( 132 kB)
[    0.000000]       .text : 0xc0029000 - 0xc049b000   (4552 kB)
[    0.000000]       .data : 0xc04be000 - 0xc04f98a0   ( 239 kB)
[    0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU-based detection of stalled CPUs is disabled.
[    0.000000]  Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:128
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [ttySAC3] enabled
[    0.010000] Calibrating delay loop... 791.34 BogoMIPS (lpj=1978368)
[    0.125000] pid_max: default: 32768 minimum: 301
[    0.130000] Mount-cache hash table entries: 512
[    0.135000] CPU: Testing write buffer coherency: ok
[    0.140000] devtmpfs: initialized
[    0.145000] NET: Registered protocol family 16
[    0.170000] imapx200: Initialising architecture
[    0.180000] leaving imap_arch_init
[    0.180000] imapx200_dma_init: Registering DMA channels: ok!
[    0.235000] bio: create slab <bio-0> at 0
[    0.240000] SCSI subsystem initialized
[    0.245000] usbcore: registered new interface driver usbfs
[    0.250000] usbcore: registered new interface driver hub
[    0.260000] usbcore: registered new device driver usb
[    0.265000] <6>imapx200_iic0 imapx200_iic0: i2c-1: IMAPX200 I2C adapter
[    0.270000] <6>imapx200_iic1 imapx200_iic1: i2c-2: IMAPX200 I2C adapter
[    0.275000] Advanced Linux Sound Architecture Driver Version 1.0.23.
[    0.285000] cfg80211: Calling CRDA to update world regulatory domain
[    0.335000] NET: Registered protocol family 2
[    0.340000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.345000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.350000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[    0.355000] TCP: Hash tables configured (established 8192 bind 8192)
[    0.360000] TCP reno registered
[    0.365000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.370000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.375000] NET: Registered protocol family 1
[    0.380000] RPC: Registered udp transport module.
[    0.385000] RPC: Registered tcp transport module.
[    0.390000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.395000] Trying to unpack rootfs image as initramfs...
[    0.425000] Freeing initrd memory: 172K
[    0.430000] iMAP PWM Driver Init.
[    0.440000] ashmem: initialized
[    0.475000] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.480000] CONFIG_YAFFS_4BIT_TAGS_ECC = TRUE
[    0.485000] alg: No test for stdrng (krng)
[    0.490000] io scheduler noop registered
[    0.495000] io scheduler deadline registered
[    0.500000] io scheduler cfq registered (default)
[    0.505000] Imap Framebuffer Driver Initialization Start!
[    0.525000] Console: switching to colour frame buffer device 100x30
[    0.535000] fb0: imapfb frame buffer device
[    0.545000] fb1: imapfb frame buffer device
[    0.550000] imap-fb, 0x0, 0x0, 0x3e
[    0.555000] Imap Framebuffer Driver Initialization OK!
[    1.145000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.160000] imapx200-uart.0: imapx200_serial0 at MMIO 0x20e20000 (irq = 51) is a IMAPX200
[    1.170000] imapx200-uart.1: imapx200_serial1 at MMIO 0x20e21000 (irq = 23) is a IMAPX200
[    1.180000] imapx200-uart.2: imapx200_serial2 at MMIO 0x20e22000 (irq = 13) is a IMAPX200
[    1.190000] imapx200-uart.3: imapx200_serial3 at MMIO 0x20e23000 (irq = 33) is a IMAPX200
[    1.215000] brd: module loaded
[    1.230000] loop: module loaded
[    1.235000] iMAPx200 NAND MTD Driver (c) 2009,2014 InfoTM
[    1.240000] Method: IRQ(1), DMA(1), SECC(0), DEC.RDY, CRCD++
[    1.245000] NAND ID: ec d5 84
[    1.250000] Assigned as K9GAG08U0E
[    1.250000] NAND device: Manufacturer ID: 0xec, Chip ID: 0xd5 (Samsung K9GAG08U0E)
[    1.255000] iMAPx200 NAND NOR BBT (c) 2009,2014 InfoTM
[    1.260000] iMAPx200 BBT: Reseting NOR flash...
[    1.265000] iMAPx200 BBT: Maf: ff40, Did: ff83
[    1.270000] iMAPx200 BBT: NOR based BBT found.
[    1.275000] iMAPx200 BBT: Bad block 0x62(IB) found.
[    1.280000] iMAPx200 BBT: Bad block 0xad(IB) found.
[    1.285000] iMAPx200 BBT: Bad block 0x1f9(IB) found.
[    1.290000] iMAPx200 BBT: Bad block 0x34a(IB) found.
[    1.295000] iMAPx200 NAND: nr_part is 0
[    1.295000] iMAPx200 NAND: Get cmdline partitions failed, using default.
[    1.300000] Creating 8 MTD partitions on "imapx200":
[    1.305000] 0x000001800000-0x000001a00000 : "ramdisk"
[    1.310000] 0x000001a00000-0x000002000000 : "kernel"
[    1.320000] 0x000002800000-0x000012800000 : "resv"
[    1.325000] iMAPx200 BBT: Bad block detected(IB): 0x62
[    1.330000] iMAPx200 BBT: Bad block detected(IB): 0xad
[    1.340000] 0x000012800000-0x00001e800000 : "system"
[    1.345000] 0x00001e800000-0x00005c000000 : "userdata"
[    1.350000] iMAPx200 BBT: Bad block detected(IB): 0x1f9
[    1.355000] iMAPx200 BBT: Bad block detected(IB): 0x34a
[    1.360000] 0x00005c000000-0x000060000000 : "cache"
[    1.370000] 0x000060000000-0x00007ff00000 : "Local-disk"
[    1.380000] 0x00007ff00000-0x000080000000 : "panic"
[    1.385000] imapx200_ssim0 imapx200_ssim0.0: bitbang at cc3c5718
[    1.390000] gmac-univ Ethernet Driver, V1.0
[    1.395000] eth0: gmac-univ at d083c000 IRQ 32 MAC: 00:1b:33:eb:04:11
[    1.400000] PPP generic driver version 2.4.2
[    1.410000] PPP MPPE Compression module registered
[    1.415000] NET: Registered protocol family 24
[    1.420000] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
[    1.425000] usbcore: registered new interface driver rtl8150
[    1.430000] hso: drivers/net/usb/hso.c: 1.2 Option Wireless
[    1.435000] usbcore: registered new interface driver hso
[    1.440000] usbcore: registered new interface driver cdc_ether
[    1.445000] usbcore: registered new interface driver dm9601
[    1.450000] usbcore: registered new interface driver sr9700_android
[    1.455000] usbcore: registered new interface driver net1080
[    1.460000] usbcore: registered new interface driver cdc_subset
[    1.465000] usbcore: registered new interface driver zaurus
[    1.470000] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    1.475000] usbcore: registered new interface driver asix
[    1.480000] usbmon: debugfs is not available
[    1.485000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.490000] imapx200_usbhost20 imapx200_usbhost20: Infotm Ehci Controller
[    1.495000] imapx200_usbhost20 imapx200_usbhost20: new USB bus registered, assigned bus number 1
[    1.500000] imapx200_usbhost20 imapx200_usbhost20: irq 44, io mem 0x20c81000
[    1.515000] imapx200_usbhost20 imapx200_usbhost20: USB 0.0 started, EHCI 1.00
[    1.520000] hub 1-0:1.0: USB hub found
[    1.525000] hub 1-0:1.0: 4 ports detected
[    1.530000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.540000] imapx200_usbhost11 imapx200_usbhost11: Infotm Ohci Controller
[    1.545000] imapx200_usbhost11 imapx200_usbhost11: new USB bus registered, assigned bus number 2
[    1.550000] imapx200_usbhost11 imapx200_usbhost11: irq 26, io mem 0x20c80000
[    1.615000] hub 2-0:1.0: USB hub found
[    1.615000] hub 2-0:1.0: 4 ports detected
[    1.625000] usbcore: registered new interface driver cdc_acm
[    1.630000] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.640000] usbcore: registered new interface driver cdc_wdm
[    1.645000] Initializing USB Mass Storage driver...
[    1.650000] usbcore: registered new interface driver usb-storage
[    1.655000] USB Mass Storage support registered.
[    1.660000] usbcore: registered new interface driver libusual
[    1.665000] usbcore: registered new interface driver usbserial
[    1.670000] usbserial: USB Serial Driver core
[    1.675000] USB Serial support registered for GSM modem (1-port)
[    1.680000] usbcore: registered new interface driver option
[    1.685000] option: v0.7.2:USB Driver for GSM modems
[    1.690000] USB Serial support registered for Qualcomm USB modem
[    1.695000] usbcore: registered new interface driver qcserial
[    1.700000] USB Serial support registered for Sierra USB modem
[    1.710000] usbcore: registered new interface driver sierra
[    1.715000] sierra: v.1.7.16:USB Driver for Sierra Wireless USB modems
[    1.720000] iMAPx200 USB Device controller (c) 2009~2014
[    1.735000] got and enabled clocks
[    1.740000] allocate valid global buffer cc012000.
[    1.745000] udc: irq no. 25
[    1.745000] probe ok
[    1.750000] android init
[    1.750000] android_probe pdata: c04c6e70
[    1.755000] usb_gadget_register_driver() 'android_usb'
[    1.760000] binding gadget driver 'android_usb'
[    1.765000] ep0max=40
[    1.765000] ix_set_selfpowered()
[    1.770000] android_bind
[    1.775000] Gadget Android: controller 'iMAPx200-UDC' not recognized
[    1.780000] ix_set_selfpowered()
[    1.785000] android_usb gadget: android_usb ready
[    1.790000] reg USB_BCWR: 0x00000000
[    1.790000] reg USB_BCIER: 0x00000000
[    1.795000] reg USB_BCIDR: 0x00000000
[    1.800000] reg USB_BCISR: 0x00000000
[    1.805000] reg USB_TBCR0: 0x00000000
[    1.805000] reg USB_TBCR1: 0x00000010
[    1.810000] reg USB_TBCR2: 0x00000000
[    1.815000] reg USB_TBCR3: 0x00000000
[    1.815000] reg USB_TBCR0: 0x00000000
[    1.820000] reg USB_ACR: 0x00000000
[    1.825000] reg USB_IER: 0x3f0f3c07
[    1.830000] Error string, N
[    1.830000] f_adb init
[    1.835000] android_register_function adb
[    1.840000] f_mass_storage init
[    1.840000] fsg_probe pdev: c04c7598, pdata: (null)
[    1.845000] android_register_function usb_mass_storage
[    1.850000] adb_bind_config
[    1.855000] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    1.860000] android_usb gadget: Number of LUNs=2
[    1.865000]  lun0: LUN: removable file: (no medium)
[    1.870000]  lun1: LUN: removable file: (no medium)
[    1.875000] mice: PS/2 mouse device common for all mice
[    1.880000] claim irq 30 OK, name sleep
[    1.885000] claim irq 30 OK, name power
[    1.890000] claim irq 47 OK, name menu
[    1.890000] External interrupt should not be used by calling like this.
[    1.895000] claim irq 5 OK, name back
[    1.900000] claim irq 47 OK, name home
[    1.900000] Error string, N
[    1.905000] claim irq 47 OK, name volumeup
[    1.910000] claim irq 47 OK, name volumedown
[    1.915000] External interrupt should not be used by calling like this.
[    1.920000] claim irq 3 OK, name hp
[    1.925000] usb 1-1: new high speed USB device using imapx200_usbhost20 and address 2
[    1.930000] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    1.935000] led0 is not defined.
[    1.935000] External interrupt should not be used by calling like this.
[    1.940000] ads7846 spi0.0: touchscreen, irq 1
[    1.945000] input: ADS7846 Touchscreen as /devices/platform/imapx200_ssim0.0/spi0.0/input/input1
[    1.955000] iMAPx200 RTCv2, (c) 2009, 2014 InfoTM Microelctronics Co., Ltd
[    1.965000] using rtc device, imap, for alarms
[    1.970000] imapx200_rtc imapx200_rtc: rtc core: registered imap as rtc0
[    1.980000] i2c /dev entries driver
[    1.985000] IR NEC protocol handler initialized
[    1.990000] IR RC5(x) protocol handler initialized
[    1.995000] IR RC6 protocol handler initialized
[    2.000000] IR JVC protocol handler initialized
[    2.005000] IR Sony protocol handler initialized
[    2.010000] Linux video capture interface: v2.00
[    2.015000] usbcore: registered new interface driver uvcvideo
[    2.020000] USB Video Class driver (v0.1.0)
[    2.030000] gt0309-xhb-ops-register
[    2.030000] adding camif sensor: xhb:gt0309
[    2.035000] gt0308-ops-register
[    2.040000] adding camif sensor: xhb:gt0308
[    2.045000] gt2005xyc-ops-register
[    2.045000] adding camif sensor: xyc:gt2005
[    2.055000] device-mapper: uevent: version 1.0.3
[    2.060000] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[    2.065000] sdhci: Secure Digital Host Controller Interface driver
[    2.070000] sdhci: Copyright(c) Pierre Ossman
[    2.075000] [SDHCI0]:infoTM sdhci host driver init.
[    2.080000] [sdhci]-SDIO MAX CLOCK RATE = 86400000
[    2.090000] mmc0: SDHCI controller on info_sdi0 [imapx200_sdi0.0] using ADMA
[    2.100000] [SDHCI1]:infoTM sdhci host driver init.
[    2.105000] channel 1 doesn't work right now
[    2.110000] [sdhci]-SDIO MAX CLOCK RATE = 86400000
[    2.115000] mmc1: SDHCI controller on info_sdi1 [imapx200_sdi1.1] using ADMA
[    2.120000] wifi_switch module init
[    2.125000] Error string, N
[    2.125000] get wifi powers/switch pins failed.
[    2.130000] switch-wifi: probe of switch-wifi.0 failed with error -25
[    2.185000] usbcore: registered new interface driver usbhid
[    2.190000] usbhid: USB HID core driver
[    2.195000] usb 1-1: can't set config #1, error -71
[    2.200000] logger: created 64K log 'log_main'
[    2.205000] usb 1-1: USB disconnect, address 2
[    2.225000] logger: created 256K log 'log_events'
[    2.240000] logger: created 64K log 'log_radio'
[    2.250000] logger: created 64K log 'log_system'
[    2.270000] es8328: Audio Codec Driver v0.12
[    2.275000] *********es8328_i2d_probe!
[    2.280000] asoc: es8328 <-> imapx200-i2s mapping ok
[    2.295000] Failed to add route (null)->(null)
[    2.300000] Failed to add route LOUT2->Headphone Jack
[    2.305000] ALSA device list:
[    2.310000]   #0: imapx200 (es8328)
[    2.315000] TCP cubic registered
[    2.320000] NET: Registered protocol family 17
[    2.320000] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    2.335000]  ------ monitor_connect_thread --------
[    2.340000] GPIO error, 0xffffffff.
[    2.345000] MAC6225 Sensortec Device detected!
[    2.345000] mac6225 registered I2C driver!
[    2.350000] input: mac6225 as /devices/virtual/input/input2
[    2.360000] imapx200_i2c_irq 2 i2c0 irq = 0x40,status = 0x150 ,abort is 0x1 addr = 0x38
[    2.365000] i2c0 : recover
[    2.370000] imapx200_i2c_irq 2 i2c0 irq = 0x40,status = 0x150 ,abort is 0x1 addr = 0x38
[    2.380000] i2c0 : recover
[    2.380000] Bosch Sensortec Device not foundi2c error -121
[    2.385000] bma150: probe of 1-0038 failed with error -1
[    2.390000] imapx200_rtc imapx200_rtc: setting system clock to 2010-09-22 00:08:36 UTC (1285114116)
[    2.395000] Freeing init memory: 132K
[    2.405000] init: /init.rc: 309: invalid option 'enabled'
[    2.850000] +++++++ id high ++++++++
[    3.405000] yaffs: dev is 32505859 name is "mtdblock3" rw
[    3.410000] yaffs: passed flags ""
[    3.425000] yaffs: dev is 32505860 name is "mtdblock4" rw
[    3.430000] yaffs: passed flags ""
[    3.595000] iMAPx200 BBT: Bad block detected(IB): 0x1f9
[    3.655000] iMAPx200 BBT: Bad block detected(IB): 0x34a
[    3.785000] yaffs: dev is 32505861 name is "mtdblock5" rw
[    3.790000] yaffs: passed flags ""
[    4.960000] init: cannot find '/system/bin/sh', disabling 'console'
[    4.965000] init: cannot find '/system/bin/vold', disabling 'vold'
[    4.970000] init: cannot find '/system/bin/servicemanager', disabling 'servicemanager'
[    4.975000] init: cannot find '/system/bin/netd', disabling 'netd'
[    4.980000] init: cannot find '/system/bin/debuggerd', disabling 'debuggerd'
[    4.985000] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
[    4.990000] init: cannot find '/system/bin/app_process', disabling 'zygote'
[    4.995000] init: cannot find '/system/bin/mediaserver', disabling 'media'
[    5.000000] init: cannot find '/system/bin/dbus-daemon', disabling 'dbus'
[    5.005000] init: cannot find '/system/bin/installd', disabling 'installd'
[    5.010000] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[    5.015000] init: cannot find '/system/bin/keystore', disabling 'keystore'
[    5.020000] init: cannot find '/system/bin/inshal', disabling 'gal'
[    5.025000] init: cannot find '/system/bin/usbdongled', disabling 'usbdongled'
[    5.030000] init: cannot execve('/sbin/HDMI'): No such file or directory
[    5.035000] init: cannot execve('/sbin/emuinit'): No such file or directory
[    5.040000] init: cannot find '/system/bin/permfd', disabling 'license'
[    5.045000] init: cannot find '/system/bin/busybox', disabling 'cpfile'
из него стало ясно что образ в нанд покарежен bad block ,
,форматнул nand , Uboot живой , пробовал им записать в nand образ uimage (0х40000000), (брал из прошивки m009f clone) hwver 0.2.3.3. вроде совпадает. Загрузиться с nand не получается
, если uimage закинуть в память а потом стартануть с этого адреса то kernel запускается )).
Вобщем вопрос
Может ктонибудь сделать dump памяти этого зверя, оч надо, чтоб оживить его
Спасибо!

Аватара пользователя
kep58
Начинающий
Начинающий
Сообщения: 5
Зарегистрирован: 22.02.2013 19:27
Откуда: Кременчуг

Re: Прошивка планшетов MID M7206, M799ca на чипах InfoTMIC x

Непрочитанное сообщение#557 » kep58 » 27.02.2013 15:29

Blaze .Прошил прошивкой 4-512m600 и планшет запустился.Но иногда все равно бывает зависает, кнопкой Reset сбросишь и тогда запускается нормально. Огромное спасибо за помощь!!! :good:

tjet
Мастер
Мастер
Сообщения: 177
Зарегистрирован: 01.02.2012 16:19
Модель телефона: M7206A-v1.7 x210
Прошивка: m799ca
Откуда: Чернигов, Украина
Контактная информация:

Re: Прошивка планшетов MID M7206, M799ca на чипах InfoTMIC x

Непрочитанное сообщение#558 » tjet » 27.02.2013 16:35

mihalych77, да, в вашем случае бэды в секторах оперативной памяти, попытаться его пропаять, может пятак или шарик в воздухе висит, или заменить. Дампа на него не встречал, увижу-сообщу.

kep58, в вашем случае зависает из-за непропая оперативной памяти или процессора, очень похожее поведение. Попытаться прогреть, должно помочь.
Ремонт убитых и полу убитых планшетов - мои контакты см. здесь

Аватара пользователя
tandes
Начинающий
Начинающий
Сообщения: 1
Зарегистрирован: 27.02.2013 20:03
Откуда: Днепропетровск

Re: Прошивка планшетов MID M7206, M799ca на чипах InfoTMIC x

Непрочитанное сообщение#559 » tandes » 27.02.2013 20:17

Похоже, я по невнимательности сунул с карточки прошиву, не удалив файл u-boot-nand. При загрузке выкатывает: "система повреждена, используйте восстановление для следующего шага" (или что-то вроде, насколько моего инглиша хватает). Я повредил загрузочный? Подскажите, пожалуйста, возможные действия (если они есть). Спасибо.

tjet
Мастер
Мастер
Сообщения: 177
Зарегистрирован: 01.02.2012 16:19
Модель телефона: M7206A-v1.7 x210
Прошивка: m799ca
Откуда: Чернигов, Украина
Контактная информация:

Re: Прошивка планшетов MID M7206, M799ca на чипах InfoTMIC x

Непрочитанное сообщение#560 » tjet » 28.02.2013 11:18

tandes, а прошиться он пытается? или в упор карту не видит?
Ремонт убитых и полу убитых планшетов - мои контакты см. здесь

Ответить