Прошивка планшетов на AllWinner A10 и A13

[KARKAS-MSC]

Уважаемые знатоки!
Я прошил свой планшет(на прош.Eken A90 16GB A10_4.0.3_0511.img) и все функции
у планшета,кроме одной,работают.
Не работает лишь фронтальная камера на 1,3 Мп,когда я пытаюсь ее
включить происходит перезагрузка планшета.При этом тыловая камера на
5 Мп работает нормально.Резерв драйверов мной был со старой прошивки
сделан,но как именно найти нужный драйвер и как его подменить я не знаю!
Можно ли заменить весь "modules" на сохраненный со старой прошивки и как?
Помогите,пожалуйста,дельным и подробным советом!
Я еще во всех этих вопросах самый начинающий.
Заранее благодарю всех,кто ответит!

[Ivankon88]

Добрый день Blaze, нужна прошивка для Concord c701 инфы в интернете почти нет помоги пожалуйста, вот фотки

[User85vv]

Помогите создать пак совместимости для планшета exeq p-970

расшифрованный script.bin

[product]
version = "1.0"
machine = "A10-EVB-V1.2"

[target]
power_start = 0
boot_clock = 1008
dcdc2_vol = 1400
dcdc3_vol = 1250
ldo2_vol = 3000
ldo3_vol = 2800
ldo4_vol = 2800
pll4_freq = 960
pll6_freq = 960
storage_type = 0

[card_boot]
logical_start = 40960
sprite_gpio0 =

[card_boot0_para]
card_ctrl = 0
card_high_speed = 1
card_line = 4
sdc_d1 = port:PF0<2><1><default><default>
sdc_d0 = port:PF1<2><1><default><default>
sdc_clk = port:PF2<2><1><default><default>
sdc_cmd = port:PF3<2><1><default><default>
sdc_d3 = port:PF4<2><1><default><default>
sdc_d2 = port:PF5<2><1><default><default>

[card_boot2_para]
card_ctrl = 2
card_high_speed = 1
card_line = 4
sdc_cmd = port:PC6<3><1><default><default>
sdc_clk = port:PC7<3><1><default><default>
sdc_d0 = port:PC8<3><1><default><default>
sdc_d1 = port:PC9<3><1><default><default>
sdc_d2 = port:PC10<3><1><default><default>
sdc_d3 = port:PC11<3><1><default><default>

[twi_para]
twi_port = 0
twi_scl = port:PB0<2><default><default><default>
twi_sda = port:PB1<2><default><default><default>

[uart_para]
uart_debug_port = 0
uart_debug_tx = port:PB22<2><1><default><default>
uart_debug_rx = port:PB23<2><1><default><default>

[jtag_para]
jtag_enable = 0
jtag_ms = port:PB14<3><default><default><default>
jtag_ck = port:PB15<3><default><default><default>
jtag_do = port:PB16<3><default><default><default>
jtag_di = port:PB17<3><default><default><default>

[dram_para]
dram_baseaddr = 0x40000000
dram_clk = 408
dram_type = 3
dram_rank_num =
dram_chip_density =
dram_io_width =
dram_bus_width =
dram_cas = 6
dram_zq = 123
dram_odt_en = 0
dram_size =
dram_tpr0 = 0x30926692
dram_tpr1 = 4240
dram_tpr2 = 0x1a0c8
dram_tpr3 = 0
dram_tpr4 = 0
dram_tpr5 = 0
dram_emr1 = 4
dram_emr2 = 0
dram_emr3 = 0

[mali_para]
mali_used = 1
mali_clkdiv = 3

[g2d_para]
g2d_used = 1
g2d_size = 0x1000000

[emac_para]
emac_used = 0
emac_rxd3 = port:PA0<2><default><default><default>
emac_rxd2 = port:PA1<2><default><default><default>
emac_rxd1 = port:PA2<2><default><default><default>
emac_rxd0 = port:PA3<2><default><default><default>
emac_txd3 = port:PA4<2><default><default><default>
emac_txd2 = port:PA5<2><default><default><default>
emac_txd1 = port:PA6<2><default><default><default>
emac_txd0 = port:PA7<2><default><default><default>
emac_rxclk = port:PA8<2><default><default><default>
emac_rxerr = port:PA9<2><default><default><default>
emac_rxdV = port:PA10<2><default><default><default>
emac_mdc = port:PA11<2><default><default><default>
emac_mdio = port:PA12<2><default><default><default>
emac_txen = port:PA13<2><default><default><default>
emac_txclk = port:PA14<2><default><default><default>
emac_crs = port:PA15<2><default><default><default>
emac_col = port:PA16<2><default><default><default>
emac_reset = port:PA17<1><default><default><default>

[twi0_para]
twi0_used = 1
twi0_scl = port:PB0<2><default><default><default>
twi0_sda = port:PB1<2><default><default><default>

[twi1_para]
twi1_used = 1
twi1_scl = port:PB18<2><default><default><default>
twi1_sda = port:PB19<2><default><default><default>

[twi2_para]
twi2_used = 1
twi2_scl = port:PB20<2><default><default><default>
twi2_sda = port:PB21<2><default><default><default>

[uart_para0]
uart_used = 1
uart_port = 0
uart_type = 2
uart_tx = port:PB22<2><1><default><default>
uart_rx = port:PB23<2><1><default><default>

[uart_para1]
uart_used = 0
uart_port = 1
uart_type = 8
uart_tx = port:PA10<4><1><default><default>
uart_rx = port:PA11<4><1><default><default>
uart_rts = port:PA12<4><1><default><default>
uart_cts = port:PA13<4><1><default><default>
uart_dtr = port:PA14<4><1><default><default>
uart_dsr = port:PA15<4><1><default><default>
uart_dcd = port:PA16<4><1><default><default>
uart_ring = port:PA17<4><1><default><default>

[uart_para2]
uart_used = 0
uart_port = 2
uart_type = 4
uart_tx = port:PI18<3><1><default><default>
uart_rx = port:PI19<3><1><default><default>
uart_rts = port:PI16<3><1><default><default>
uart_cts = port:PI17<3><1><default><default>

[uart_para3]
uart_used = 0
uart_port = 3
uart_type = 4
uart_tx = port:PH0<4><1><default><default>
uart_rx = port:PH1<4><1><default><default>
uart_rts = port:PH2<4><1><default><default>
uart_cts = port:PH3<4><1><default><default>

[uart_para4]
uart_used = 0
uart_port = 4
uart_type = 2
uart_tx = port:PH4<4><1><default><default>
uart_rx = port:PH5<4><1><default><default>

[uart_para5]
uart_used = 0
uart_port = 5
uart_type = 2
uart_tx = port:PH6<4><1><default><default>
uart_rx = port:PH7<4><1><default><default>

[uart_para6]
uart_used = 0
uart_port = 6
uart_type = 2
uart_tx = port:PA12<4><1><default><default>
uart_rx = port:PA13<4><1><default><default>

[uart_para7]
uart_used = 0
uart_port = 7
uart_type = 2
uart_tx = port:PA14<4><1><default><default>
uart_rx = port:PA15<4><1><default><default>

[spi0_para]
spi_used = 0
spi_cs0 = port:PI10<3><default><default><default>
spi_cs1 = port:PI14<3><default><default><default>
spi_sclk = port:PI11<3><default><default><default>
spi_mosi = port:PI12<3><default><default><default>
spi_miso = port:PI13<3><default><default><default>

[spi1_para]
spi_used = 0
spi_cs0 = port:PA0<4><default><default><default>
spi_cs1 = port:PA4<4><default><default><default>
spi_sclk = port:PI1<4><default><default><default>
spi_mosi = port:PI2<4><default><default><default>
spi_miso = port:PI3<4><default><default><default>

[spi2_para]
spi_used = 0
spi_cs0 = port:PC19<3><default><default><default>
spi_cs1 =
spi_sclk = port:PC20<3><default><default><default>
spi_mosi = port:PC21<3><default><default><default>
spi_miso = port:PC22<3><default><default><default>

[spi3_para]
spi_used = 0
spi_cs0 = port:PA5<4><default><default><default>
spi_cs1 = port:PA9<4><default><default><default>
spi_sclk = port:PI6<4><default><default><default>
spi_mosi = port:PI7<4><default><default><default>
spi_miso = port:PI8<4><default><default><default>

[rtp_para]
rtp_used = 0
rtp_screen_size = 7
rtp_regidity_level = 7
rtp_press_threshold_enable = 0
rtp_press_threshold = 8000
rtp_sensitive_level = 15
rtp_exchange_x_y_flag = 0

[ctp_para]
ctp_boxchip_type = 2576
ctp_used = 1
ctp_name = "ft5x_ts"
ctp_twi_addr = 0x38
ctp2_used = 1
ctp2_name = "ssd253x-ts"
ctp2_twi_addr = 0x48
ctp2_ssd_type = 970
ctp3_used = 1
ctp3_name = "novatek-ts"
ctp3_twi_addr = 0x9
ctp6_used = 1
ctp6_name = "Goodix-TS"
ctp6_twi_addr = 0x55
ctp7_used = 1
ctp7_name = "gt82x"
ctp7_twi_addr = 0x5d
key_val_mul = 0
ctp_twi_id = 2
ctp_screen_max_x = 1024
ctp_screen_max_y = 768
ctp_revert_x_flag = 0
ctp_revert_y_flag = 0
ctp_exchange_x_y_flag = 1
ctp_havekey = 1
ctp_io_port_i = port:PH21<0><default><default><default>
ctp_io_port_o = port:PH21<1><default><default><default>
ctp_int_port = port:PH21<6><default><default><default>
ctp_wakeup = port:PB13<1><default><default><1>
ctp_en = port:PI16<1><default><default><0>
ctp_io_port = port:PH21<0><default><default><default>

[tkey_para]
tkey_used = 0
tkey_name = "hv_keypad"
tkey_twi_id = 2
tkey_twi_addr = 0x62
tkey_int = port:PI13<6><default><default><default>

[motor_para]
motor_used = 0
motor_shake = port:PB3<1><default><default><1>

[nand_para]
nand_used = 1
nand_we = port:PC0<2><default><default><default>
nand_ale = port:PC1<2><default><default><default>
nand_cle = port:PC2<2><default><default><default>
nand_ce1 = port:PC3<2><default><default><default>
nand_ce0 = port:PC4<2><default><default><default>
nand_nre = port:PC5<2><default><default><default>
nand_rb0 = port:PC6<2><default><default><default>
nand_rb1 = port:PC7<2><default><default><default>
nand_d0 = port:PC8<2><default><default><default>
nand_d1 = port:PC9<2><default><default><default>
nand_d2 = port:PC10<2><default><default><default>
nand_d3 = port:PC11<2><default><default><default>
nand_d4 = port:PC12<2><default><default><default>
nand_d5 = port:PC13<2><default><default><default>
nand_d6 = port:PC14<2><default><default><default>
nand_d7 = port:PC15<2><default><default><default>
nand_wp = port:PC16<2><default><default><default>
nand_ce2 = port:PC17<2><default><default><default>
nand_ce3 = port:PC18<2><default><default><default>
nand_ce4 =
nand_ce5 =
nand_ce6 =
nand_ce7 =
nand_spi = port:PC23<3><default><default><default>
nand_ndqs = port:PC24<2><default><default><default>

[disp_init]
disp_init_enable = 1
disp_mode = 0
screen0_output_type = 1
screen0_output_mode = 4
screen1_output_type = 1
screen1_output_mode = 4
fb0_framebuffer_num = 2
fb0_format = 10
fb0_pixel_sequence = 0
fb0_scaler_mode_enable = 0
fb1_framebuffer_num = 2
fb1_format = 10
fb1_pixel_sequence = 0
fb1_scaler_mode_enable = 0
lcd0_bright = 197
lcd1_bright = 197
lcd0_screen_bright = 50
lcd0_screen_contrast = 50
lcd0_screen_saturation = 57
lcd0_screen_hue = 50
lcd1_screen_bright = 50
lcd1_screen_contrast = 50
lcd1_screen_saturation = 57
lcd1_screen_hue = 50

[lcd0_para]
lcd_used = 1
lcd_pwm_not_used = 0
lcd_pwm_ch = 0
lcd_pwm_freq = 10000
lcd_pwm_pol = 1
lcd_x = 1024
lcd_y = 768
lcd_dclk_freq = 100
lcd_if = 3
lcd_hbp = 800
lcd_ht = 2084
lcd_vbp = 16
lcd_vt = 1600
lcd_srgb = 0x202020
lcd_hv_if = 0
lcd_hv_smode = 0
lcd_hv_s888_if = 0
lcd_hv_syuv_if = 0
lcd_hv_vspw = 0
lcd_hv_hspw = 0
lcd_lvds_ch = 0
lcd_lvds_mode = 1
lcd_lvds_bitwidth = 0
lcd_lvds_io_cross = 0
lcd_cpu_if = 0
lcd_frm = 1
lcd_io_cfg0 = 0x10000000
lcd_gamma_correction_en = 0
lcd_gamma_tbl_0 = 0
lcd_gamma_tbl_1 = 0x10101
lcd_gamma_tbl_255 = 0xffffff
lcd_bl_en_used = 1
lcd_bl_en = port:PH7<1><0><default><1>
lcd_power_used = 1
lcd_power = port:PH8<1><0><default><1>
lcd_pwm_used = 1
lcd_pwm = port:PB2<2><0><default><default>
lcd_gpio_0 =
lcd_gpio_1 =
lcd_gpio_2 =
lcd_gpio_3 =
lcdd0 = port:PD0<2><0><default><default>
lcdd1 = port:PD1<2><0><default><default>
lcdd2 = port:PD2<2><0><default><default>
lcdd3 = port:PD3<2><0><default><default>
lcdd4 = port:PD4<2><0><default><default>
lcdd5 = port:PD5<2><0><default><default>
lcdd6 = port:PD6<2><0><default><default>
lcdd7 = port:PD7<2><0><default><default>
lcdd8 = port:PD8<2><0><default><default>
lcdd9 = port:PD9<2><0><default><default>
lcdd10 = port:PD10<2><0><default><default>
lcdd11 = port:PD11<2><0><default><default>
lcdd12 = port:PD12<2><0><default><default>
lcdd13 = port:PD13<2><0><default><default>
lcdd14 = port:PD14<2><0><default><default>
lcdd15 = port:PD15<2><0><default><default>
lcdd16 = port:PD16<2><0><default><default>
lcdd17 = port:PD17<2><0><default><default>
lcdd18 = port:PD18<2><0><default><default>
lcdd19 = port:PD19<2><0><default><default>
lcdd20 = port:PD20<2><0><default><default>
lcdd21 = port:PD21<2><0><default><default>
lcdd22 = port:PD22<2><0><default><default>
lcdd23 = port:PD23<2><0><default><default>
lcdclk = port:PD24<2><0><default><default>
lcdde = port:PD25<2><0><default><default>
lcdhsync = port:PD26<2><0><default><default>
lcdvsync = port:PD27<2><0><default><default>

[lcd1_para]
lcd_used = 0
lcd_x = 0
lcd_y = 0
lcd_dclk_freq = 0
lcd_pwm_not_used = 0
lcd_pwm_ch = 1
lcd_pwm_freq = 0
lcd_pwm_pol = 0
lcd_if = 0
lcd_hbp = 0
lcd_ht = 0
lcd_vbp = 0
lcd_vt = 0
lcd_hv_if = 0
lcd_hv_smode = 0
lcd_hv_s888_if = 0
lcd_hv_syuv_if = 0
lcd_hv_vspw = 0
lcd_hv_hspw = 0
lcd_lvds_ch = 0
lcd_lvds_mode = 0
lcd_lvds_bitwidth = 0
lcd_lvds_io_cross = 0
lcd_cpu_if = 0
lcd_frm = 0
lcd_io_cfg0 = 0
lcd_gamma_correction_en = 0
lcd_gamma_tbl_0 = 0
lcd_gamma_tbl_1 = 0x10101
lcd_gamma_tbl_255 = 0xffffff
lcd_bl_en_used = 0
lcd_bl_en =
lcd_power_used = 0
lcd_power =
lcd_pwm_used = 1
lcd_pwm = port:PI3<2><0><default><default>
lcd_gpio_0 =
lcd_gpio_1 =
lcd_gpio_2 =
lcd_gpio_3 =
lcdd0 = port:PH0<2><0><default><default>
lcdd1 = port:PH1<2><0><default><default>
lcdd2 = port:PH2<2><0><default><default>
lcdd3 = port:PH3<2><0><default><default>
lcdd4 = port:PH4<2><0><default><default>
lcdd5 = port:PH5<2><0><default><default>
lcdd6 = port:PH6<2><0><default><default>
lcdd7 = port:PH7<2><0><default><default>
lcdd8 = port:PH8<2><0><default><default>
lcdd9 = port:PH9<2><0><default><default>
lcdd10 = port:PH10<2><0><default><default>
lcdd11 = port:PH11<2><0><default><default>
lcdd12 = port:PH12<2><0><default><default>
lcdd13 = port:PH13<2><0><default><default>
lcdd14 = port:PH14<2><0><default><default>
lcdd15 = port:PH15<2><0><default><default>
lcdd16 = port:PH16<2><0><default><default>
lcdd17 = port:PH17<2><0><default><default>
lcdd18 = port:PH18<2><0><default><default>
lcdd19 = port:PH19<2><0><default><default>
lcdd20 = port:PH20<2><0><default><default>
lcdd21 = port:PH21<2><0><default><default>
lcdd22 = port:PH22<2><0><default><default>
lcdd23 = port:PH23<2><0><default><default>
lcdclk = port:PH24<2><0><default><default>
lcdde = port:PH25<2><0><default><default>
lcdhsync = port:PH26<2><0><default><default>
lcdvsync = port:PH27<2><0><default><default>

[tv_out_dac_para]
dac_used = 1
dac0_src = 4
dac1_src = 5
dac2_src = 6
dac3_src = 0

[csi0_para]
csi_used = 1
csi_mode = 0
csi_dev_qty = 2
csi_stby_mode = 1
csi_mname = "gc0308"
csi_twi_id = 1
csi_twi_addr = 0x42
csi_if = 0
csi_vflip = 0
csi_hflip = 0
csi_iovdd = ""
csi_avdd = ""
csi_dvdd = ""
csi_flash_pol = 1
csi_mname_b = "gt2005"
csi_twi_id_b = 1
csi_twi_addr_b = 0x78
csi_if_b = 0
csi_vflip_b = 0
csi_hflip_b = 0
csi_iovdd_b = ""
csi_avdd_b = ""
csi_dvdd_b = ""
csi_flash_pol_b = 1
csi_pck = port:PE0<3><default><default><default>
csi_ck = port:PE1<3><default><default><default>
csi_hsync = port:PE2<3><default><default><default>
csi_vsync = port:PE3<3><default><default><default>
csi_d0 = port:PE4<3><default><default><default>
csi_d1 = port:PE5<3><default><default><default>
csi_d2 = port:PE6<3><default><default><default>
csi_d3 = port:PE7<3><default><default><default>
csi_d4 = port:PE8<3><default><default><default>
csi_d5 = port:PE9<3><default><default><default>
csi_d6 = port:PE10<3><default><default><default>
csi_d7 = port:PE11<3><default><default><default>
csi_d8 =
csi_d9 =
csi_d10 =
csi_d11 =
csi_d12 =
csi_d13 =
csi_d14 =
csi_d15 =
csi_reset = port:PH13<1><default><default><0>
csi_power_en = port:PH16<1><default><default><0>
csi_stby = port:PH18<1><default><default><0>
csi_flash =
csi_af_en =
csi_reset_b = port:PH13<1><default><default><0>
csi_power_en_b = port:PH16<1><default><default><0>
csi_stby_b = port:PH19<1><default><default><0>
csi_flash_b =
csi_af_en_b =

[csi1_para]
csi_used = 0
csi_mode = 0
csi_dev_qty = 1
csi_stby_mode = 1
csi_mname = ""
csi_twi_id = 1
csi_twi_addr = 0xba
csi_if = 0
csi_vflip = 0
csi_hflip = 0
csi_iovdd = ""
csi_avdd = ""
csi_dvdd = ""
csi_flash_pol = 1
csi_mname_b = ""
csi_twi_id_b = 1
csi_twi_addr_b = 0x78
csi_if_b = 0
csi_vflip_b = 1
csi_hflip_b = 0
csi_iovdd_b = ""
csi_avdd_b = ""
csi_dvdd_b = ""
csi_flash_pol_b = 1
csi_pck = port:PG0<3><default><default><default>
csi_ck = port:PG1<3><default><default><default>
csi_hsync = port:PG2<3><default><default><default>
csi_vsync = port:PG3<3><default><default><default>
csi_field =
csi_d0 = port:PG4<3><default><default><default>
csi_d1 = port:PG5<3><default><default><default>
csi_d2 = port:PG6<3><default><default><default>
csi_d3 = port:PG7<3><default><default><default>
csi_d4 = port:PG8<3><default><default><default>
csi_d5 = port:PG9<3><default><default><default>
csi_d6 = port:PG10<3><default><default><default>
csi_d7 = port:PG11<3><default><default><default>
csi_d8 =
csi_d9 =
csi_d10 =
csi_d11 =
csi_d12 =
csi_d13 =
csi_d14 =
csi_d15 =
csi_d16 =
csi_d17 =
csi_d18 =
csi_d19 =
csi_d20 =
csi_d21 =
csi_d22 =
csi_d23 =
csi_reset = port:PH14<1><default><default><0>
csi_power_en =
csi_stby = port:PH17<1><default><default><0>
csi_flash =
csi_af_en =
csi_reset_b =
csi_power_en_b =
csi_stby_b =
csi_flash_b =
csi_af_en_b =

[tvout_para]
tvout_used = 0
tvout_channel_num = 1
tv_en = port:PI12<1><default><default><0>

[tvin_para]
tvin_used = 0
tvin_channel_num = 4

[sata_para]
sata_used = 0
sata_power_en =

[mmc0_para]
sdc_used = 1
sdc_detmode = 1
bus_width = 4
sdc_d1 = port:PF0<2><1><2><default>
sdc_d0 = port:PF1<2><1><2><default>
sdc_clk = port:PF2<2><1><2><default>
sdc_cmd = port:PF3<2><1><2><default>
sdc_d3 = port:PF4<2><1><2><default>
sdc_d2 = port:PF5<2><1><2><default>
sdc_det = port:PH1<0><1><default><default>
sdc_use_wp = 0
sdc_wp =

[mmc1_para]
sdc_used = 0
sdc_detmode = 1
bus_width = 4
sdc_cmd = port:PH22<5><1><2><default>
sdc_clk = port:PH23<5><1><2><default>
sdc_d0 = port:PH24<5><1><2><default>
sdc_d1 = port:PH25<5><1><2><default>
sdc_d2 = port:PH26<5><1><2><default>
sdc_d3 = port:PH27<5><1><2><default>
sdc_det = port:PH2<0><1><default><default>
sdc_use_wp = 0
sdc_wp =

[mmc2_para]
sdc_used = 0

[mmc3_para]
sdc_used = 0
sdc_detmode = 1
bus_width = 4
sdc_cmd = port:PI4<2><1><2><default>
sdc_clk = port:PI5<2><1><2><default>
sdc_d0 = port:PI6<2><1><2><default>
sdc_d1 = port:PI7<2><1><2><default>
sdc_d2 = port:PI8<2><1><2><default>
sdc_d3 = port:PI9<2><1><2><default>
sdc_det =
sdc_use_wp = 0
sdc_wp =

[ms_para]
ms_used = 0
ms_bs = port:PH6<5><default><default><default>
ms_clk = port:PH7<5><default><default><default>
ms_d0 = port:PH8<5><default><default><default>
ms_d1 = port:PH9<5><default><default><default>
ms_d2 = port:PH10<5><default><default><default>
ms_d3 = port:PH11<5><default><default><default>
ms_det =

[smc_para]
smc_used = 0
smc_rst = port:PH13<5><default><default><default>
smc_vppen = port:PH14<5><default><default><default>
smc_vppp = port:PH15<5><default><default><default>
smc_det = port:PH16<5><default><default><default>
smc_vccen = port:PH17<5><default><default><default>
smc_sck = port:PH18<5><default><default><default>
smc_sda = port:PH19<5><default><default><default>

[ps2_0_para]
ps2_used = 0
ps2_scl = port:PI20<2><1><default><default>
ps2_sda = port:PI21<2><1><default><default>

[ps2_1_para]
ps2_used = 0
ps2_scl = port:PI14<3><1><default><default>
ps2_sda = port:PI15<3><1><default><default>

[can_para]
can_used = 0
can_tx = port:PA16<3><default><default><default>
can_rx = port:PA17<3><default><default><default>

[keypad_para]
kp_used = 0
kp_in_size = 8
kp_out_size = 8
kp_in0 = port:PH8<4><1><default><default>
kp_in1 = port:PH9<4><1><default><default>
kp_in2 = port:PH10<4><1><default><default>
kp_in3 = port:PH11<4><1><default><default>
kp_in4 = port:PH14<4><1><default><default>
kp_in5 = port:PH15<4><1><default><default>
kp_in6 = port:PH16<4><1><default><default>
kp_in7 = port:PH17<4><1><default><default>
kp_out0 = port:PH18<4><1><default><default>
kp_out1 = port:PH19<4><1><default><default>
kp_out2 = port:PH22<4><1><default><default>
kp_out3 = port:PH23<4><1><default><default>
kp_out4 = port:PH24<4><1><default><default>
kp_out5 = port:PH25<4><1><default><default>
kp_out6 = port:PH26<4><1><default><default>
kp_out7 = port:PH27<4><1><default><default>

[usbc0]
usb_used = 1
usb_port_type = 2
usb_detect_type = 1
usb_id_gpio = port:PH4<0><1><default><default>
usb_det_vbus_gpio = port:PH5<0><0><default><default>
usb_drv_vbus_gpio = port:PB9<1><0><default><0>
usb_host_init_state = 0

[usbc1]
usb_used = 1
usb_port_type = 1
usb_detect_type = 0
usb_id_gpio =
usb_det_vbus_gpio =
usb_drv_vbus_gpio = port:PH6<1><0><default><0>
usb_host_init_state = 1

[usbc2]
usb_used = 1
usb_port_type = 1
usb_detect_type = 0
usb_id_gpio =
usb_det_vbus_gpio =
usb_drv_vbus_gpio = port:PH3<1><0><default><0>
usb_host_init_state = 0

[usb_feature]
vendor_id = 6353
mass_storage_id = 1
adb_id = 2
manufacturer_name = "USB Developer"
product_name = "Android"
serial_number = "20080411"

[msc_feature]
vendor_name = "USB 2.0"
product_name = "USB Flash Driver"
release = 100
luns = 3

[gsensor_para]
gsensor_used = 1
gsensor_name = "bma250"
gsensor_twi_addr = 0x18
gsensor_twi_id = 1
gsensor_int1 = port:PH0<6><1><default><default>
gsensor_int2 = port:PI10<6><1><default><default>

[gps_para]
gps_used = 0
gps_spi_id = 2
gps_spi_cs_num = 0
gps_lradc = 1
gps_clk = port:PI0<2><default><default><default>
gps_sign = port:PI1<2><default><default><default>
gps_mag = port:PI2<2><default><default><default>
gps_vcc_en = port:PC22<1><default><default><0>
gps_osc_en = port:PI14<1><default><default><0>
gps_rx_en = port:PI15<1><default><default><0>

[sdio_wifi_para]
sdio_wifi_used = 0
sdio_wifi_sdc_id = 3
sdio_wifi_mod_sel = 1
swl_n20_shdn = port:PH9<1><default><default><0>
swl_n20_host_wakeup = port:PH10<1><default><default><1>
swl_n20_vdd_en = port:PH11<1><default><default><0>
swl_n20_vcc_en = port:PH12<1><default><default><0>

[usb_wifi_para]
usb_wifi_used = 1
usb_wifi_usbc_num = 2

[3g_para]
3g_used = 0
3g_usbc_num = 2
3g_uart_num = 0
3g_pwr =
3g_wakeup =
3g_int =

[gy_para]
gy_used = 0
gy_twi_id = 1
gy_twi_addr = 0x0
gy_int1 = port:PH18<6><1><default><default>
gy_int2 = port:PH19<6><1><default><default>

[ls_para]
ls_used = 0
ls_twi_id = 1
ls_twi_addr = 0x0
ls_int = port:PH20<6><1><default><default>

[compass_para]
compass_used = 0
compass_twi_id = 1
compass_twi_addr = 0x0
compass_int = port:PI13<6><1><default><default>

[bt_para]
bt_used = 0
bt_uart_id = 2
bt_mod_type = 1

[i2s_para]
i2s_used = 0
i2s_channel = 2
i2s_mclk = port:PB5<2><1><default><default>
i2s_bclk = port:PB6<2><1><default><default>
i2s_lrclk = port:PB7<2><1><default><default>
i2s_dout0 = port:PB8<2><1><default><default>
i2s_dout1 =
i2s_dout2 =
i2s_dout3 =
i2s_din = port:PB12<2><1><default><default>

[spdif_para]
spdif_used = 0
spdif_mclk =
spdif_dout = port:PB13<4><1><default><default>
spdif_din =

[audio_para]
audio_used = 1
capture_used = 1
audio_lr_change = 0
audio_pa_ctrl = port:PH15<1><default><default><0>

[ir_para]
ir_used = 0
ir0_rx = port:PB4<2><default><default><default>

[pmu_para]
pmu_used = 1
pmu_twi_addr = 0x34
pmu_twi_id = 0
pmu_irq_id = 0
pmu_battery_rdc = 100
pmu_battery_cap = 4500
pmu_init_chgcur = 600
pmu_earlysuspend_chgcur = 600
pmu_suspend_chgcur = 1000
pmu_resume_chgcur = 300
pmu_shutdown_chgcur = 1000
pmu_init_chgvol = 4200
pmu_init_chgend_rate = 15
pmu_init_chg_enabled = 1
pmu_init_adc_freq = 100
pmu_init_adc_freqc = 100
pmu_init_chg_pretime = 50
pmu_init_chg_csttime = 720
pmu_bat_para1 = 0
pmu_bat_para2 = 0
pmu_bat_para3 = 0
pmu_bat_para4 = 0
pmu_bat_para5 = 5
pmu_bat_para6 = 8
pmu_bat_para7 = 11
pmu_bat_para8 = 22
pmu_bat_para9 = 33
pmu_bat_para10 = 43
pmu_bat_para11 = 50
pmu_bat_para12 = 59
pmu_bat_para13 = 71
pmu_bat_para14 = 83
pmu_bat_para15 = 92
pmu_bat_para16 = 100
pmu_usbvol_limit = 1
pmu_usbcur_limit = 0
pmu_usbvol = 4000
pmu_usbcur = 0
pmu_usbvol_pc = 4000
pmu_usbcur_pc = 0
pmu_pwroff_vol = 3300
pmu_pwron_vol = 2900
pmu_pekoff_time = 9000
pmu_pekoff_en = 1
pmu_peklong_time = 1500
pmu_pekon_time = 1000
pmu_pwrok_time = 64
pmu_pwrnoe_time = 2000
pmu_intotp_en = 1
pmu_used2 = 0
pmu_adpdet = port:PH2<0><default><default><default>
pmu_init_chgcur2 = 400
pmu_earlysuspend_chgcur2 = 600
pmu_suspend_chgcur2 = 1200
pmu_resume_chgcur2 = 400
pmu_shutdown_chgcur2 = 1200
pmu_suspendpwroff_vol = 3500
pmu_batdeten = 1

[recovery_key]
key_min = 4
key_max = 100

[dvfs_table]
max_freq = 0x3c14dc00
min_freq = 0x3938700
LV_count = 5
LV1_freq = 0x3ef14800
LV1_volt = 1500
LV2_freq = 0x3c14dc00
LV2_volt = 1400
LV3_freq = 0x365c0400
LV3_volt = 1350
LV4_freq = 0x337f9800
LV4_volt = 1300
LV5_freq = 0x25317c00
LV5_volt = 1250

[ZOra]

Помогите будласка есть планшет CRONY CN97A на оф.сайте прошивки нет перепробовал все что можно подошла прошивка a0708.img , но тач работает в зеркальном положении. По инструкции по корректировки осей пробыл не помогло.

[Blaze]

Разбери планшет и спиши все надписи на и под материнской платой.

[Blaze]

Nightout1, нет, так не должно быть.

Можно ли заменить весь "modules" на сохраненный со старой прошивки и как?

Только толку 0. Необходимо знать какой модуль, отвечающий за камеру, подгружается в init.sun*i.rc в прошивке Eken A90 16GB A10_4.0.3_0511.img
и какой модуль подгружается в прошивке, в которой работали обе камеры. Данный модуль переименуйте в имя модуля камеры Eken A90 16GB A10_4.0.3_0511.img и загрузите в /vendor/modules/

User85vv, мало вероятно, что кто-то возьмется за создание пака совместимости.

ZOra, разберите планшет и спишите все надписи на и под материнской платой.

[KARKAS-MSC]

Уважаемый "Blaze"!
Есть ли какие-нибудь признаки в обозначении модуля камеры или его расположении
в "modules" или в "init.sun4i.rc"по которым можно этот модул вычислить?
Благодарю за быстрый ответ,но очень необходима помощь с этой камерой!

[Blaze]

KARKAS-MSC, скопируйте содержимое init.sun4i.rc в данную тему.

[rumba123]

Имеется планшет "под N8000" с маркировкой крышки изнутри как MID-900 B. Задняя крышка похожа на эту:

После экпериментов с прошивками заметил, что нет акселерометра. На одной из прошивок аксель появился (смотрел через Android Sensor Box), но прыгает как сумасшедший.
Подскажите пожалуйста как можно подобрать драйвера на аксель?
Потроха планшета:

материнская плата ALONG AL-A13-90A_V3, REV:3.0, 2012.12.14
чип ALLWINNER TECH A13 D4033CA 1641
контроллер питания AXP209
оперативная память SKhynix H27UCG8T2BTB
беспроводной адаптер Realtek RTL8188ETV
тачскрин контроллер A97E 30 x2
тачскрин процессор ilead GSL3680 G2A0D4P371N
часы 8563T
дисплей AT090TN12-3.5

[ZOra]

все микрухи или все