Sat · Mobile · Tablet PC
https://ublaze.ru/forum/
are you sure all to 1 ?SUBtire писал(а):Use DragonFace to edit it. Change all 0 to 1 in [camera_list_para].
Yes, maybe it will work.karlito6283 писал(а):are you sure all to 1 ?SUBtire писал(а):Use DragonFace to edit it. Change all 0 to 1 in [camera_list_para].
SUBtire писал(а):Do you have your original ROM? Give me a link for it.
У меня такая же проблема, я тоже всё поменял на 1, и тоже не работаетSUBtire писал(а):Yes, maybe it will work.karlito6283 писал(а):are you sure all to 1 ?SUBtire писал(а):Use DragonFace to edit it. Change all 0 to 1 in [camera_list_para].
Код: Выделить всё
[csi0_para]
csi_used = 1
csi_dev_qty = 2
csi_stby_mode = 1
csi_mname = "gc2035"
csi_twi_id = 1
csi_twi_addr = 0x78
csi_if = 0
csi_vflip = 0
csi_hflip = 0
csi_iovdd = "axp20_pll"
csi_avdd = "axp20_hdmi"
csi_dvdd = ""
csi_vol_iovdd = 2800
csi_vol_dvdd =
csi_vol_avdd = 2800
csi_flash_pol = 0
csi_facing = 0
csi_mname_b = "gc0308"
csi_twi_id_b = 1
csi_twi_addr_b = 0x42
csi_if_b = 0
csi_vflip_b = 0
csi_hflip_b = 0
csi_iovdd_b = "axp20_pll"
csi_avdd_b = "axp20_hdmi"
csi_dvdd_b = ""
csi_vol_iovdd_b = 2800
csi_vol_avdd_b = 2800
csi_vol_dvdd_b =
csi_flash_pol_b = 0
csi_facing_b = 1Код: Выделить всё
# csi module
insmod /system/vendor/modules/videobuf-core.ko
insmod /system/vendor/modules/videobuf-dma-contig.ko
#insmod /system/vendor/modules/camera.ko
#insmod_modules camera
insmod /system/vendor/modules/gc0308.ko
insmod /system/vendor/modules/gc03081.ko
insmod /system/vendor/modules/sunxi_csi0.ko
insmod /system/vendor/modules/sunxi_csi1.koКак узнать какой мне нужен? Или если я нашару по 1 буду торкать планшет будет загружатся?SUBtire писал(а):Damn. Forgot 'bout this. Yes, change gc0308.ko and gc03081.ko to your module.