Прошивка планшета на AllWinner A20 dual core

[karlito6283]

Use DragonFace to edit it. Change all 0 to 1 in [camera_list_para].

are you sure all to 1 ?

Добавлено спустя 57 секунд:
im use DragonFace mate!

[SUBtire]

Use DragonFace to edit it. Change all 0 to 1 in [camera_list_para].

are you sure all to 1 ?

Yes, maybe it will work.

[karlito6283]

i true it but same problem.

Добавлено спустя 7 минут 46 секунд:
i think camera is broken,i true more times but same problem every time.

[SUBtire]

Do you have your original ROM? Give me a link for it.

[karlito6283]

Do you have your original ROM? Give me a link for it.

you can download here firmware link

[daived]

Use DragonFace to edit it. Change all 0 to 1 in [camera_list_para].

are you sure all to 1 ?

Yes, maybe it will work.

У меня такая же проблема, я тоже всё поменял на 1, и тоже не работает

[SUBtire]

Then do this:

Код: Выделить всё

[csi0_para]
csi_used            = 1

csi_dev_qty         = 2
csi_stby_mode       = 1
csi_mname           = "gc2035"
csi_twi_id          = 1
csi_twi_addr        = 0x78
csi_if              = 0
csi_vflip           = 0
csi_hflip           = 0
csi_iovdd           = "axp20_pll"
csi_avdd            = "axp20_hdmi"
csi_dvdd            = ""
csi_vol_iovdd       = 2800
csi_vol_dvdd        = 
csi_vol_avdd        = 2800
csi_flash_pol       = 0
csi_facing          = 0

csi_mname_b         = "gc0308"
csi_twi_id_b        = 1
csi_twi_addr_b      = 0x42
csi_if_b            = 0
csi_vflip_b         = 0
csi_hflip_b         = 0
csi_iovdd_b         = "axp20_pll"
csi_avdd_b          = "axp20_hdmi"
csi_dvdd_b          = ""
csi_vol_iovdd_b     = 2800
csi_vol_avdd_b      = 2800
csi_vol_dvdd_b      = 
csi_flash_pol_b     = 0
csi_facing_b        = 1

Change this section (csi0_para) to your own values from orig. ROM.

[karlito6283]

nothing same broblem!

maybee need a change Inir.rc file?

Код: Выделить всё

# csi module
    insmod /system/vendor/modules/videobuf-core.ko
    insmod /system/vendor/modules/videobuf-dma-contig.ko
    #insmod /system/vendor/modules/camera.ko
    #insmod_modules camera
    insmod /system/vendor/modules/gc0308.ko
    insmod /system/vendor/modules/gc03081.ko
    insmod /system/vendor/modules/sunxi_csi0.ko
    insmod /system/vendor/modules/sunxi_csi1.ko

Добавлено спустя 3 минуты 7 секунд:
this 2 lines....

insmod /system/vendor/modules/gc0308.ko
insmod /system/vendor/modules/gc03081.ko

[SUBtire]

Damn. Forgot 'bout this. Yes, change gc0308.ko and gc03081.ko to your module.

[daived]

Damn. Forgot 'bout this. Yes, change gc0308.ko and gc03081.ko to your module.

Как узнать какой мне нужен? Или если я нашару по 1 буду торкать планшет будет загружатся?