Hi renddyx.
I have this firmware CWWX-S906I-iliumPADE9v2-A-hd_dbl_vcom_V1.1.4.1-v1.0-20131122_20131122_195727.rar
Прошивка планшета на AllWinner A20 dual core
Модератор: чипега
Прошивка планшета на AllWinner A20 dual core
Thank you i will try 
UPDATE:
nothing this rom don´t work
, 
this is the original build.prop
UPDATE:
nothing this rom don´t work
, this is the original build.prop
Код: Выделить всё
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JDQ39
ro.build.display.id=M900-20130826
ro.build.version.incremental=20130730
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date.utc=1375198295
ro.build.type=eng
ro.build.user=zhengzhenxing
ro.build.host=brn-zhengzhenxing
ro.build.tags=test-keys
ro.product.model=M-900
ro.product.brand=softwinners
ro.product.name=wing_s906i
ro.product.device=wing-s906i
ro.product.board=wing
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=unknown
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=exDroid
# ro.build.product is obsolete; use ro.product.device
ro.build.product=wing-s906i
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=SoftwinerEvb_V1.1.4.1_20130730_r703+3_5b12221
ro.build.fingerprint=softwinners/wing_s906i/wing-s906i:4.2.2/JDQ39/20130730:eng/test-keys
ro.build.characteristics=tablet
# end build properties
# broncho tag,please don't modify
ro.broncho.id=s906i_dbl_V1.1.4.1_20130730_r703+3_5b12221
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
ro.config.alarm_alert=Alarm_Classic.ogg
persist.sampling_profiler=1
ro.kernel.android.checkjni=0
persist.sys.timezone=Asia/Shanghai
persist.sys.language=en
persist.sys.country=US
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
debug.egl.hw=1
ro.display.switch=1
ro.opengles.version=131072
rild.libargs=-d/dev/ttyUSB2
rild.libpath=/system/lib/libsoftwinner-ril.so
keyguard.no_require_sim=true
persist.sys.strictmode.visual=0
persist.sys.strictmode.disable=1
persist.sys.hdmi.out=0
hwui.render_dirty_regions=false
drm.service.enabled=false
dalvik.vm.heapsize=384m
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
persist.sys.usb.config=mass_storage,adb
ro.property.tabletUI=true
ro.sf.lcd_density=160
ro.udisk.lable=M-900
ro.product.firmware=v1.3
ro.property.fontScale=1.0
ro.broncho.BT=y
ro.broncho.wifi.name=mt7601
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txtBlaze писал(а):Hi renddyx.
I have this firmware CWWX-S906I-iliumPADE9v2-A-hd_dbl_vcom_V1.1.4.1-v1.0-20131122_20131122_195727.rar
Последний раз редактировалось renddyx 28.03.2015 23:44, всего редактировалось 1 раз.
Прошивка планшета на AllWinner A20 dual core
Доброго времени суток! Есть планшет http://www.jay-tech.de/jaytech/servlet/ ... a77a:-28ae, помогите найти прошивку, уже почти все что есть в шапке перепробовал, ничего не подходит.
http://hkar.ru/zUxt
http://hkar.ru/zUxu
Если что то не видно, говорите, могу переписать.
http://hkar.ru/zUxt
http://hkar.ru/zUxu
Если что то не видно, говорите, могу переписать.
-
Blaze
- Информатик-аналитик
- Сообщения: 8933
- Зарегистрирован: 24.05.2007 17:23
- Модель телефона: POCO X3 Pro 6/128
- Прошивка: crDroid v7.7
- Sat-ресивер: Tiviar Mini HD
- Откуда: Данков
- Контактная информация:
Прошивка планшета на AllWinner A20 dual core
renddyx, it's strange.
This is build.prop of the CWWX-S906I-iliumPADE9v2-A-hd_dbl_vcom_V1.1.4.1-v1.0-20131122_20131122_195727.rar firmware
1. Do you done all wipe and factory reset via recovery (cwm)?
2. Do you use a new version PhoenixSuit V1.09 Share By AzimBahar.7z for flash your Tablet pc?
Dvoika, 9#-V1.2 2013/08/11
напишите в поддержку jay-tech.de
что бы они дали Вам ссылку на прошивку для Tablet PC970
This is build.prop of the CWWX-S906I-iliumPADE9v2-A-hd_dbl_vcom_V1.1.4.1-v1.0-20131122_20131122_195727.rar firmware
Код: Выделить всё
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JDQ39
ro.build.display.id=ilium PAD E9 _V1.1_20131122
ro.build.version.incremental=20131017
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date.utc=1381992402
ro.build.type=eng
ro.build.user=yangjinbo
ro.build.host=yangjinbo-desktop
ro.build.tags=test-keys
ro.product.model=ilium PAD E9
ro.product.brand=softwinners
ro.product.name=wing_s906I
ro.product.device=wing-s906I
ro.product.board=wing
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=unknown
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=exDroid
# ro.build.product is obsolete; use ro.product.device
ro.build.product=wing-s906I
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=SoftwinerEvb_V1.1.4.1_20131017_s786_01aea60
ro.build.fingerprint=softwinners/wing_s906I/wing-s906I:4.2.2/JDQ39/20131017:eng/test-keys
ro.build.characteristics=tablet
# end build properties
# broncho tag,please don't modify
ro.broncho.id=s906I_hd_dbl_vcom_V1.1.4.1_20131017_s786_01aea60
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
ro.config.alarm_alert=Alarm_Classic.ogg
persist.sampling_profiler=1
ro.kernel.android.checkjni=0
persist.sys.timezone=America/Mexico_City
persist.sys.language=zh
persist.sys.country=CN
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
debug.egl.hw=1
ro.display.switch=1
ro.opengles.version=131072
rild.libargs=-d/dev/ttyUSB2
rild.libpath=/system/lib/libsoftwinner-ril.so
keyguard.no_require_sim=true
persist.sys.strictmode.visual=0
persist.sys.strictmode.disable=1
persist.sys.hdmi.out=0
hwui.render_dirty_regions=false
drm.service.enabled=false
dalvik.vm.heapsize=384m
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
persist.sys.usb.config=mass_storage,adb
ro.property.tabletUI=true
ro.sf.lcd_density=160
ro.udisk.lable=iliumPAD
ro.product.firmware=v1.3
ro.property.fontScale=1.0
ro.broncho.wifi.name=mt7601
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
2. Do you use a new version PhoenixSuit V1.09 Share By AzimBahar.7z for flash your Tablet pc?
Dvoika, 9#-V1.2 2013/08/11
напишите в поддержку jay-tech.de
Код: Выделить всё
support@jay-tech.deПрошивка планшета на AllWinner A20 dual core
i use dragonface and changed:
To:
Yes, It Working, Gsensor, Touch and WIFI, But bluetooth and camera Dont working,
In the options to activate bluetooth does not appear, where could enable this option ? and the camera would not mind so much I think it is harder to activate
Edit:
This Work Gsensor+Bluetooth+WIFI. Dont Work Camera
Код: Выделить всё
[lcd0_para]
lcd_used = 1
lcd_x = 1024
lcd_y = 600
lcd_width = 199
lcd_height = 113
lcd_dclk_freq = 52
lcd_pwm_not_used = 0
lcd_pwm_ch = 0
lcd_pwm_freq = 10000
lcd_pwm_pol = 1
lcd_max_bright = 220
lcd_min_bright = 84
lcd_if = 3
Код: Выделить всё
[lcd0_para]
lcd_used = 1
lcd_x = 800
lcd_y = 480
lcd_width = 199
lcd_height = 113
lcd_dclk_freq = 52
lcd_pwm_not_used = 0
lcd_pwm_ch = 0
lcd_pwm_freq = 10000
lcd_pwm_pol = 1
lcd_max_bright = 220
lcd_min_bright = 84
lcd_if = 0
In the options to activate bluetooth does not appear, where could enable this option ? and the camera would not mind so much I think it is harder to activate
Edit:
This Work Gsensor+Bluetooth+WIFI. Dont Work Camera
Код: Выделить всё
;A20 PAD application
;-------------------------------------------------------------------------------
; 说明：
; 1. 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串
; 2. 新增主键和子键的名称必须控制在32个字符以内，不包括32个
; 3. 所以的注释以“;”开始，单独占据一行
; 4. 注释不可和配置项同行，例如：主键和子健后面不能添加任何形式的注释
;
; gpio的描述形式：Port:端口+组内序号<功能分配><内部电阻状态><驱动能力><输出电平状态>
; 例如：port:PA0<0><default><default><default>
;-------------------------------------------------------------------------------
[product]
version = "100"
machine = "s906-v10"
[platform]
eraseflag = 1
[target]
boot_clock = 912
dcdc2_vol = 1400
dcdc3_vol = 1250
ldo2_vol = 3000
ldo3_vol = 2800
ldo4_vol = 2800
power_start = 0
storage_type = -1
[clock]
pll3 = 297
pll4 = 300
pll6 = 600
pll7 = 297
pll8 = 336
[card_boot]
logical_start = 40960
sprite_gpio0 =
[card0_boot_para]
card_ctrl = 0
card_high_speed = 1
card_line = 4
sdc_d1 = port:PF0<2><1><default><default>
sdc_d0 = port:PF1<2><1><default><default>
sdc_clk = port:PF2<2><1><default><default>
sdc_cmd = port:PF3<2><1><default><default>
sdc_d3 = port:PF4<2><1><default><default>
sdc_d2 = port:PF5<2><1><default><default>
[card2_boot_para]
card_ctrl = 2
card_high_speed = 1
card_line = 4
sdc_cmd = port:PC6<3><1>
sdc_clk = port:PC7<3><1>
sdc_d0 = port:PC8<3><1>
sdc_d1 = port:PC9<3><1>
sdc_d2 = port:PC10<3><1>
sdc_d3 = port:PC11<3><1>
[twi_para]
twi_port = 0
twi_scl = port:PB0<2><default><default><default>
twi_sda = port:PB1<2><default><default><default>
[uart_para]
uart_debug_port = 0
uart_debug_tx = port:PB22<2><1><default><default>
uart_debug_rx = port:PB23<2><1><default><default>
[uart_force_debug]
uart_debug_port = 0
uart_debug_tx =port:PF2<4><1><default><default>
uart_debug_rx =port:PF4<4><1><default><default>
[jtag_para]
jtag_enable = 1
jtag_ms = port:PB14<3><default><default><default>
jtag_ck = port:PB15<3><default><default><default>
jtag_do = port:PB16<3><default><default><default>
jtag_di = port:PB17<3><default><default><default>
;---------------------------------------------------------------------------------------------------------
; if 1 == standby_mode, then support super standby;
; else, support normal standby.
;---------------------------------------------------------------------------------------------------------
[pm_para]
standby_mode = 1
;-------------------------------------------------------------------------------
;sdram configuration
;-------------------------------------------------------------------------------
[dram_para]
dram_baseaddr = 0x40000000
dram_clk = 384
dram_type = 3
dram_rank_num = 0xffffffff
dram_chip_density = 0xffffffff
dram_io_width = 0xffffffff
dram_bus_width = 0xffffffff
dram_cas = 9
dram_zq = 0x7f
dram_odt_en = 0
dram_size = 0xffffffff
dram_tpr0 = 0x42d899b7
dram_tpr1 = 0xa090
dram_tpr2 = 0x22a00
dram_tpr3 = 0x0
dram_tpr4 = 0x0
dram_tpr5 = 0x0
dram_emr1 = 0x4
dram_emr2 = 0x10
dram_emr3 = 0x0
;-------------------------------------------------------------------------------
;Mali configuration
;-------------------------------------------------------------------------------
[mali_para]
mali_used = 1
mali_clkdiv = 1
mali_normal_freq = 192
mali_min_freq = 192
;-------------------------------------------------------------------------------
;Ethernet MAC configuration
;-------------------------------------------------------------------------------
[emac_para]
emac_used = 0
emac_rxd3 = port:PA00<2><default><default><default>
emac_rxd2 = port:PA01<2><default><default><default>
emac_rxd1 = port:PA02<2><default><default><default>
emac_rxd0 = port:PA03<2><default><default><default>
emac_txd3 = port:PA04<2><default><default><default>
emac_txd2 = port:PA05<2><default><default><default>
emac_txd1 = port:PA06<2><default><default><default>
emac_txd0 = port:PA07<2><default><default><default>
emac_rxclk = port:PA08<2><default><default><default>
emac_rxerr = port:PA09<2><default><default><default>
emac_rxdV = port:PA10<2><default><default><default>
emac_mdc = port:PA11<2><default><default><default>
emac_mdio = port:PA12<2><default><default><default>
emac_txen = port:PA13<2><default><default><default>
emac_txclk = port:PA14<2><default><default><default>
emac_crs = port:PA15<2><default><default><default>
emac_col = port:PA16<2><default><default><default>
emac_reset = port:PA17<1><default><default><default>
;-------------------------------------------------------------------------------
;i2c configuration
;-------------------------------------------------------------------------------
[twi0_para]
twi0_used = 1
twi0_scl = port:PB0<2><default><default><default>
twi0_sda = port:PB1<2><default><default><default>
[twi1_para]
twi1_used = 1
twi1_scl = port:PB18<2><default><default><default>
twi1_sda = port:PB19<2><default><default><default>
[twi2_para]
twi2_used = 1
twi2_scl = port:PB20<2><default><default><default>
twi2_sda = port:PB21<2><default><default><default>
;-------------------------------------------------------------------------------
;uart configuration
;uart_type --- 2 (2 wire), 4 (4 wire), 8 (8 wire, full function)
;-------------------------------------------------------------------------------
[uart_para0]
uart_used = 1
uart_port = 0
uart_type = 2
uart_tx = port:PB22<2><1><default><default>
uart_rx = port:PB23<2><1><default><default>
[uart_para1]
uart_used = 1
uart_port = 1
uart_type = 4
uart_tx = port:PA10<4><1><default><default>
uart_rx = port:PA11<4><1><default><default>
uart_rts = port:PA12<4><1><default><default>
uart_cts = port:PA13<4><1><default><default>
uart_dtr = port:PA14<4><1><default><default>
uart_dsr = port:PA15<4><1><default><default>
uart_dcd = port:PA16<4><1><default><default>
uart_ring = port:PA17<4><1><default><default>
[uart_para2]
uart_used = 1
uart_port = 2
uart_type = 4
uart_tx = port:PI18<3><1><default><default>
uart_rx = port:PI19<3><1><default><default>
uart_rts = port:PI16<3><1><default><default>
uart_cts = port:PI17<3><1><default><default>
[uart_para3]
uart_used = 0
uart_port = 3
uart_type = 4
uart_tx = port:PH00<4><1><default><default>
uart_rx = port:PH01<4><1><default><default>
uart_rts = port:PH02<4><1><default><default>
uart_cts = port:PH03<4><1><default><default>
[uart_para4]
uart_used = 0
uart_port = 4
uart_type = 2
uart_tx = port:PH04<4><1><default><default>
uart_rx = port:PH05<4><1><default><default>
[uart_para5]
uart_used = 0
uart_port = 5
uart_type = 2
uart_tx = port:PH06<4><1><default><default>
uart_rx = port:PH07<4><1><default><default>
[uart_para6]
uart_used = 0
uart_port = 6
uart_type = 2
uart_tx = port:PA12<3><1><default><default>
uart_rx = port:PA13<3><1><default><default>
[uart_para7]
uart_used = 0
uart_port = 7
uart_type = 2
uart_tx = port:PA14<3><1><default><default>
uart_rx = port:PA15<3><1><default><default>
;-------------------------------------------------------------------------------
;spi configuration
;-------------------------------------------------------------------------------
[spi0_para]
spi_used = 0
spi_cs_bitmap = 1
spi_cs0 = port:PI10<2><default><default><default>
spi_cs1 = port:PI14<2><default><default><default>
spi_sclk = port:PI11<2><default><default><default>
spi_mosi = port:PI12<2><default><default><default>
spi_miso = port:PI13<2><default><default><default>
[spi1_para]
spi_used = 0
spi_cs_bitmap = 1
spi_cs0 = port:PA00<3><default><default><default>
spi_cs1 = port:PA04<3><default><default><default>
spi_sclk = port:PA01<3><default><default><default>
spi_mosi = port:PA02<3><default><default><default>
spi_miso = port:PA03<3><default><default><default>
[spi2_para]
spi_used = 0
spi_cs_bitmap = 1
spi_cs0 = port:PC19<3><default><default><default>
spi_cs1 = port:PB13<2><default><default><default>
spi_sclk = port:PC20<3><default><default><default>
spi_mosi = port:PC21<3><default><default><default>
spi_miso = port:PC22<3><default><default><default>
[spi3_para]
spi_used = 0
spi_cs_bitmap = 1
spi_cs0 = port:PA05<3><default><default><default>
spi_cs1 = port:PA09<3><default><default><default>
spi_sclk = port:PA06<3><default><default><default>
spi_mosi = port:PA07<3><default><default><default>
spi_miso = port:PA08<3><default><default><default>
;-------------------------------------------------------------------------------
;capacitor tp configuration
;external int function
;wakeup output function
;notice:
; tp_int_port & tp_io_port use the same port
;-------------------------------------------------------------------------------
[ctp_para]
ctp_used = 1
ctp_twi_id = 2
ctp_screen_max_x = 1024
ctp_screen_max_y = 600
ctp_int_port = port:PH21<6><default><default><default>
ctp_wakeup = port:PB13<1><default><default><1>
;--------------------------------------------------------------------------------
; CTP automatic detection configuration
;ctp_detect_used --- Whether startup automatic inspection function. 1:used,0:unused
;Module name postposition 1 said detection, 0 means no detection.
;--------------------------------------------------------------------------------
[ctp_list_para]
ctp_det_used = 1
ft5x_ts = 0
gt82x = 0
gslX680 = 0
gt9xx_ts = 1
gt910 = 0
gt811 = 0
gt818 = 0
ilitek_aimvF = 0
zet6621 = 0
;-------------------------------------------------------------------------------
;touch key configuration
;-------------------------------------------------------------------------------
[tkey_para]
tkey_used = 0
tkey_twi_id = 2
tkey_twi_addr = 0x62
tkey_int = port:PI13<6><default><default><default>
;-------------------------------------------------------------------------------
;motor configuration
;-------------------------------------------------------------------------------
[motor_para]
motor_used = 0
motor_shake = port:PB03<1><default><default><1>
;-------------------------------------------------------------------------------
;nand flash configuration
;-------------------------------------------------------------------------------
[nand_para]
nand_used = 1
nand_we = port:PC00<2><default><default><default>
nand_ale = port:PC01<2><default><default><default>
nand_cle = port:PC02<2><default><default><default>
nand_ce1 = port:PC03<2><default><default><default>
nand_ce0 = port:PC04<2><default><default><default>
nand_nre = port:PC05<2><default><default><default>
nand_rb0 = port:PC06<2><default><default><default>
nand_rb1 = port:PC07<2><default><default><default>
nand_d0 = port:PC08<2><default><default><default>
nand_d1 = port:PC09<2><default><default><default>
nand_d2 = port:PC10<2><default><default><default>
nand_d3 = port:PC11<2><default><default><default>
nand_d4 = port:PC12<2><default><default><default>
nand_d5 = port:PC13<2><default><default><default>
nand_d6 = port:PC14<2><default><default><default>
nand_d7 = port:PC15<2><default><default><default>
nand_wp = port:PC16<2><default><default><default>
nand_ce2 = port:PC17<2><default><default><default>
nand_ce3 = port:PC18<2><default><default><default>
nand_ce4 =
nand_ce5 =
nand_ce6 =
nand_ce7 =
nand_spi = port:PC23<3><default><default><default>
nand_ndqs = port:PC24<2><default><default><default>
good_block_ratio = 944
;-------------------------------------------------------------------------------
;disp init configuration
;
;disp_mode (0:screen0<screen0,fb0> 1:screen1<screen1,fb0> 2:two_diff_screen_diff_contents<screen0,screen1,fb0,fb1>
; 3:two_same_screen_diff_contets<screen0,screen1,fb0> 4:two_diff_screen_same_contents<screen0,screen1,fb0>)
;screenx_output_type (0:none; 1:lcd; 2:tv; 3:hdmi; 4:vga)
;screenx_output_mode (used for tv/hdmi output, 0:480i 1:576i 2:480p 3:576p 4:720p50 5:720p60 6:1080i50 7:1080i60 8:1080p24 9:1080p50 10:1080p60 11:pal 14:ntsc)
;screenx_output_mode (used for vga output, 0:1680*1050 1:1440*900 2:1360*768 3:1280*1024 4:1024*768 5:800*600 6:640*480 10:1920*1080 11:1280*720)
;fbx format (4:RGB655 5:RGB565 6:RGB556 7:ARGB1555 8:RGBA5551 9:RGB888 10:ARGB8888 12:ARGB4444)
;fbx pixel sequence (0:ARGB 1:BGRA 2:ABGR 3:RGBA) --- 0 for linux, 2 for android
;lcd0_bright (lcd0 init bright,the range:[0,256],default:197
;lcd1_bright (lcd1 init bright,the range:[0,256],default:197
;-------------------------------------------------------------------------------
[disp_init]
disp_init_enable = 1
disp_mode = 0
screen0_output_type = 1
screen0_output_mode = 4
screen1_output_type = 1
screen1_output_mode = 4
fb0_framebuffer_num = 2
fb0_format = 10
fb0_pixel_sequence = 0
fb0_scaler_mode_enable = 0
fb0_width = 0
fb0_height = 0
fb1_framebuffer_num = 2
fb1_format = 10
fb1_pixel_sequence = 0
fb1_scaler_mode_enable = 0
fb1_width = 0
fb1_height = 0
lcd0_backlight = 197
lcd1_backlight = 197
lcd0_bright = 50
lcd0_contrast = 50
lcd0_saturation = 57
lcd0_hue = 50
lcd1_bright = 50
lcd1_contrast = 50
lcd1_saturation = 57
lcd1_hue = 50
;-------------------------------------------------------------------------------
;lcd0 configuration
;lcd_dclk_freq: in MHZ unit
;lcd_pwm_freq: in HZ unit
;lcd_if: 0:hv(sync+de); 1:8080; 2:ttl; 3:lvds; 4:hv2dsi
;lcd_width: width of lcd in mm
;lcd_height: height of lcd in mm
;lcd_hbp: hsync back porch
;lcd_ht: hsync total cycle
;lcd_vbp: vsync back porch
;lcd_vt: vysnc total cycle *2
;lcd_hv_if: 0:hv parallel 1:hv serial
;lcd_hv_smode: 0:RGB888 1:CCIR656
;lcd_hv_s888_if serial RGB format
;lcd_hv_syuv_if: serial YUV format
;lcd_hspw: hsync plus width
;lcd_vspw: vysnc plus width
;lcd_lvds_ch: 0:single channel; 1:dual channel
;lcd_lvds_mode: 0:NS mode; 1:JEIDA mode
;lcd_lvds_bitwidth: 0:24bit; 1:18bit
;lcd_lvds_io_cross: 0:normal; 1:pn cross
;lcd_cpu_if: 0:18bit; 1:16bit mode0; 2:16bit mode1; 3:16bit mode2; 4:16bit mode3; 5:9bit; 6:8bit 256K; 7:8bit 65K
;lcd_frm: 0:disable; 1:enable rgb666 dither; 2:enable rgb656 dither
;lcd_gpio_0: SCL
;lcd_gpio_1 SDA
;-------------------------------------------------------------------------------
[lcd0_para]
lcd_used = 1
lcd_x = 800
lcd_y = 480
lcd_width = 199
lcd_height = 113
lcd_dclk_freq = 52
lcd_pwm_not_used = 0
lcd_pwm_ch = 0
lcd_pwm_freq = 10000
lcd_pwm_pol = 1
lcd_max_bright = 220
lcd_min_bright = 84
lcd_if = 0
lcd_hbp = 320
lcd_ht = 1350
lcd_vbp = 35
lcd_vt = 1300
lcd_vspw = 0
lcd_hspw = 0
lcd_hv_if = 0
lcd_hv_smode = 0
lcd_hv_s888_if = 0
lcd_hv_syuv_if = 0
lcd_lvds_ch = 0
lcd_lvds_mode = 0
lcd_lvds_bitwidth = 0
lcd_lvds_io_cross = 0
lcd_cpu_if = 0
lcd_frm = 0
lcd_io_cfg0 = 0x00000000
lcd_gamma_correction_en = 0
lcd_gamma_tbl_0 = 0x00000000
lcd_gamma_tbl_1 = 0x00010101
lcd_gamma_tbl_255 = 0x00ffffff
lcd_bl_en_used = 1
lcd_bl_en = port:PH07<1><0><default><1>
lcd_power_used = 1
lcd_power = port:PH08<1><0><default><1>
lcd_pwm_used = 1
lcd_pwm = port:PB02<2><0><default><default>
lcd_pwm1_used = 0
lcd_pwm1 = port:PI03<2><0><default><default>
pwm1_active_cycle = 393
lcdd0 = port:PD00<2><0><default><default>
lcdd1 = port:PD01<2><0><default><default>
lcdd2 = port:PD02<2><0><default><default>
lcdd3 = port:PD03<2><0><default><default>
lcdd4 = port:PD04<2><0><default><default>
lcdd5 = port:PD05<2><0><default><default>
lcdd6 = port:PD06<2><0><default><default>
lcdd7 = port:PD07<2><0><default><default>
lcdd8 = port:PD08<2><0><default><default>
lcdd9 = port:PD09<2><0><default><default>
lcdd10 = port:PD10<2><0><default><default>
lcdd11 = port:PD11<2><0><default><default>
lcdd12 = port:PD12<2><0><default><default>
lcdd13 = port:PD13<2><0><default><default>
lcdd14 = port:PD14<2><0><default><default>
lcdd15 = port:PD15<2><0><default><default>
lcdd16 = port:PD16<2><0><default><default>
lcdd17 = port:PD17<2><0><default><default>
lcdd18 = port:PD18<2><0><default><default>
lcdd19 = port:PD19<2><0><default><default>
lcdd20 = port:PD20<2><0><default><default>
lcdd21 = port:PD21<2><0><default><default>
lcdd22 = port:PD22<2><0><default><default>
lcdd23 = port:PD23<2><0><default><default>
lcdclk = port:PD24<2><0><default><default>
lcdde = port:PD25<2><0><default><default>
lcdhsync = port:PD26<2><0><default><default>
lcdvsync = port:PD27<2><0><default><default>
;----------------------------------------------------------------------------------
;lcd1 configuration
;lcd_dclk_freq: in MHZ unit
;lcd_pwm_freq: in HZ unit
;lcd_if: 0:hv(sync+de); 1:8080; 2:ttl; 3:lvds
;lcd_hbp: hsync back porch
;lcd_ht: hsync total cycle
;lcd_vbp: vsync back porch
;lcd_vt: vysnc total cycle *2
;lcd_hv_if: 0:hv parallel 1:hv serial
;lcd_hv_smode: 0:RGB888 1:CCIR656
;lcd_hv_s888_if serial RGB format
;lcd_hv_syuv_if: serial YUV format
;lcd_hspw: hsync plus width
;lcd_vspw: vysnc plus width
;lcd_lvds_ch: 0:single channel; 1:dual channel
;lcd_lvds_mode: 0:NS mode; 1:JEIDA mode
;lcd_lvds_bitwidth: 0:24bit; 1:18bit
;lcd_lvds_io_cross: 0:normal; 1:pn cross
;lcd_cpu_if: 0:18bit; 1:16bit mode0; 2:16bit mode1; 3:16bit mode2; 4:16bit mode3; 5:9bit; 6:8bit 256K; 7:8bit 65K
;lcd_frm: 0:disable; 1:enable rgb666 dither; 2:enable rgb656 dither
;lcd_gpio_0: SCL
;lcd_gpio_1 SDA
;----------------------------------------------------------------------------------
[lcd1_para]
lcd_used = 0
lcd_x = 0
lcd_y = 0
lcd_dclk_freq = 0
lcd_pwm_not_used = 0
lcd_pwm_ch = 1
lcd_pwm_freq = 0
lcd_pwm_pol = 0
lcd_max_bright = 200
lcd_min_bright = 64
lcd_if = 0
lcd_hbp = 0
lcd_ht = 0
lcd_vbp = 0
lcd_vt = 0
lcd_vspw = 0
lcd_hspw = 0
lcd_hv_if = 0
lcd_hv_smode = 0
lcd_hv_s888_if = 0
lcd_hv_syuv_if = 0
lcd_lvds_ch = 0
lcd_lvds_mode = 0
lcd_lvds_bitwidth = 0
lcd_lvds_io_cross = 0
lcd_cpu_if = 0
lcd_frm = 0
lcd_io_cfg0 = 0
lcd_gamma_correction_en = 0
lcd_gamma_tbl_0 = 0x00000000
lcd_gamma_tbl_1 = 0x00010101
lcd_gamma_tbl_255 = 0x00ffffff
lcd_bl_en_used = 0
lcd_bl_en =
lcd_power_used = 0
lcd_power =
lcd_pwm_used = 1
lcd_pwm = port:PI03<2><0><default><default>
lcd_gpio_0 =
lcd_gpio_1 =
lcd_gpio_2 =
lcd_gpio_3 =
lcdd0 = port:PH00<2><0><default><default>
lcdd1 = port:PH01<2><0><default><default>
lcdd2 = port:PH02<2><0><default><default>
lcdd3 = port:PH03<2><0><default><default>
lcdd4 = port:PH04<2><0><default><default>
lcdd5 = port:PH05<2><0><default><default>
lcdd6 = port:PH06<2><0><default><default>
lcdd7 = port:PH07<2><0><default><default>
lcdd8 = port:PH08<2><0><default><default>
lcdd9 = port:PH09<2><0><default><default>
lcdd10 = port:PH10<2><0><default><default>
lcdd11 = port:PH11<2><0><default><default>
lcdd12 = port:PH12<2><0><default><default>
lcdd13 = port:PH13<2><0><default><default>
lcdd14 = port:PH14<2><0><default><default>
lcdd15 = port:PH15<2><0><default><default>
lcdd16 = port:PH16<2><0><default><default>
lcdd17 = port:PH17<2><0><default><default>
lcdd18 = port:PH18<2><0><default><default>
lcdd19 = port:PH19<2><0><default><default>
lcdd20 = port:PH20<2><0><default><default>
lcdd21 = port:PH21<2><0><default><default>
lcdd22 = port:PH22<2><0><default><default>
lcdd23 = port:PH23<2><0><default><default>
lcdclk = port:PH24<2><0><default><default>
lcdde = port:PH25<2><0><default><default>
lcdhsync = port:PH26<2><0><default><default>
lcdvsync = port:PH27<2><0><default><default>
;-------------------------------------------------------------------------------
;tv out dac configuration
;dacx_src: 0:composite; 1:luma; 2:chroma; 4:Y; 5:Pb; 6: Pr; 7:none
;-------------------------------------------------------------------------------
[tv_out_dac_para]
dac_used = 1
dac0_src = 4
dac1_src = 5
dac2_src = 6
dac3_src = 0
;----------------------------------------------------------------------------------
;hdmi configuration
;----------------------------------------------------------------------------------
[hdmi_para]
hdmi_used = 1
[camera_list_para]
camera_list_para_used = 1
ov7670 = 0
gc0308 = 1
gc0328 = 1
gt2005 = 1
hi704 = 0
sp0838 = 1
sp0718 = 1
sp2518 = 1
mt9m112 = 0
mt9m113 = 0
ov2655 = 0
hi253 = 0
gc0307 = 0
mt9d112 = 0
ov5640 = 0
gc2015 = 1
ov2643 = 0
gc0329 = 1
gc0309 = 0
tvp5150 = 0
s5k4ec = 0
ov5650_mv9335 = 0
siv121d = 1
gc2035 = 1
;--------------------------------------------------------------------------------
;csi gpio configuration
;csi_if: 0:hv_8bit 1:hv_16bit 2:hv_24bit 3:bt656 1ch 4:bt656 2ch 5:bt656 4ch
;csi_mode: 0:sample one csi to one buffer 1:sample two csi to one buffer
;csi_dev_qty: The quantity of devices linked to csi interface
;csi_vflip: flip in vertical direction 0:disable 1:enable
;csi_hflip: flip in horizontal direction 0:disable 1:enable
;csi_stby_mode: 0:not shut down power at standby 1:shut down power at standby
;csi_iovdd: camera module io power , pmu power supply
;csi_avdd: camera module analog power , pmu power supply
;csi_dvdd: camera module core power , pmu power supply
;pmu_ldo3: fill "axp20_pll"
;pmu_ldo4: fill "axp20_hdmi"
;fill "" when not using any pmu power supply
;csi_flash_pol: the active polority of the flash light IO 0:low active 1:high active
;--------------------------------------------------------------------------------
[csi0_para]
csi_used = 1
csi_dev_qty = 2
csi_stby_mode = 0
csi_mname = "sp2518"
csi_twi_id = 1
csi_twi_addr = 0x60
csi_if = 0
csi_vflip = 0
csi_hflip = 0
csi_iovdd = "axp20_pll"
csi_avdd = "axp20_hdmi"
csi_dvdd = ""
csi_vol_iovdd = 2800
csi_vol_dvdd =
csi_vol_avdd =
csi_flash_pol = 0
csi_facing = 0
csi_mname_b = "sp0718"
csi_twi_id_b = 1
csi_twi_addr_b = 0x42
csi_if_b = 0
csi_vflip_b = 0
csi_hflip_b = 0
csi_iovdd_b = "axp20_pll"
csi_avdd_b = "axp20_hdmi"
csi_dvdd_b = ""
csi_vol_iovdd_b = 2800
csi_vol_avdd_b = 2800
csi_vol_dvdd_b =
csi_flash_pol_b = 0
csi_facing_b = 1
csi_pck = port:PE00<3><default><default><default>
csi_ck = port:PE01<3><default><default><default>
csi_hsync = port:PE02<3><default><default><default>
csi_vsync = port:PE03<3><default><default><default>
csi_d0 = port:PE04<3><default><default><default>
csi_d1 = port:PE05<3><default><default><default>
csi_d2 = port:PE06<3><default><default><default>
csi_d3 = port:PE07<3><default><default><default>
csi_d4 = port:PE08<3><default><default><default>
csi_d5 = port:PE09<3><default><default><default>
csi_d6 = port:PE10<3><default><default><default>
csi_d7 = port:PE11<3><default><default><default>
csi_reset = port:PH14<1><default><default><0>
csi_power_en = port:PH17<1><default><default><0>
csi_stby = port:PH18<1><default><default><0>
csi_flash =
csi_af_en =
csi_reset_b = port:PH14<1><default><default><0>
csi_power_en_b = port:PH17<1><default><default><0>
csi_stby_b = port:PH19<1><default><default><0>
csi_flash_b =
csi_af_en_b =
[csi1_para]
csi_used = 0
csi_dev_qty = 1
csi_stby_mode = 0
csi_mname = "gc0308"
csi_if = 0
csi_iovdd = "axp20_pll"
csi_avdd = ""
csi_dvdd = ""
csi_vol_iovdd = 2800
csi_vol_dvdd =
csi_vol_avdd =
csi_vflip = 0
csi_hflip = 0
csi_flash_pol = 0
csi_facing = 1
csi_twi_id = 1
csi_twi_addr = 0x42
csi_pck = port:PG00<3><default><default><default>
csi_ck = port:PG01<3><default><default><default>
csi_hsync = port:PG02<3><default><default><default>
csi_vsync = port:PG03<3><default><default><default>
csi_d0 = port:PG04<3><default><default><default>
csi_d1 = port:PG05<3><default><default><default>
csi_d2 = port:PG06<3><default><default><default>
csi_d3 = port:PG07<3><default><default><default>
csi_d4 = port:PG08<3><default><default><default>
csi_d5 = port:PG09<3><default><default><default>
csi_d6 = port:PG10<3><default><default><default>
csi_d7 = port:PG11<3><default><default><default>
csi_reset = port:PH13<1><default><default><0>
csi_power_en = port:PH16<1><default><default><0>
csi_stby = port:PH19<1><default><default><0>
;-------------------------------------------------------------------------------
;tv configuration
;
;-------------------------------------------------------------------------------
[tvout_para]
tvout_used = 1
tvout_channel_num = 1
[tvin_para]
tvin_used = 0
tvin_channel_num = 4
;-------------------------------------------------------------------------------
;sata configuration
;
;-------------------------------------------------------------------------------
[sata_para]
sata_used = 1
sata_power_en =
;-------------------------------------------------------------------------------
; SDMMC PINS MAPPING
; ------------------------------------------------------------------------------
; Config Guide
; sdc_used: 1-enable card, 0-disable card
; sdc_detmode: card detect mode
; 1-detect card by gpio polling
; 2-detect card by gpio irq(must use IO with irq function)
; 3-no detect, always in for boot card
; 4-manually insert and remove by /proc/driver/sunxi-mmc.x/insert
; sdc_buswidth: card bus width, 1-1bit, 4-4bit, 8-8bit
; sdc_use_wp: 1-with write protect IO, 0-no write protect IO
; sdc_isio: for sdio card
; sdc_regulator: power control.
; other: GPIO Mapping configuration
; ------------------------------------------------------------------------------
; Note:
; 1 if detmode=2, sdc_det's config=6
; else if detmode=1, sdc_det's config=0
; else sdc_det IO is not necessary
; 2 if the customer wants to support UHS-I and HS200 features, he must provide
; an independent power supply for the card. This is only used in platforms
; that supports SD3.0 cards and eMMC4.4+ flashes
;-------------------------------------------------------------------------------
[mmc0_para]
sdc_used = 1
sdc_detmode = 1
sdc_buswidth = 4
sdc_clk = port:PF02<2><1><2><default>
sdc_cmd = port:PF03<2><1><2><default>
sdc_d0 = port:PF01<2><1><2><default>
sdc_d1 = port:PF00<2><1><2><default>
sdc_d2 = port:PF05<2><1><2><default>
sdc_d3 = port:PF04<2><1><2><default>
sdc_det = port:PH1<0><1><default><default>
sdc_use_wp = 0
sdc_wp =
sdc_isio = 0
sdc_regulator = "none"
[mmc1_para]
sdc_used = 0
sdc_detmode = 4
sdc_buswidth = 4
sdc_clk = port:PG00<2><1><2><default>
sdc_cmd = port:PG01<2><1><2><default>
sdc_d0 = port:PG02<2><1><2><default>
sdc_d1 = port:PG03<2><1><2><default>
sdc_d2 = port:PG04<2><1><2><default>
sdc_d3 = port:PG05<2><1><2><default>
sdc_det =
sdc_use_wp = 0
sdc_wp =
sdc_isio = 0
sdc_regulator = "none"
[mmc2_para]
sdc_used = 0
sdc_detmode = 3
sdc_buswidth = 4
sdc_cmd = port:PC06<3><1><2><default>
sdc_clk = port:PC07<3><1><2><default>
sdc_d0 = port:PC08<3><1><2><default>
sdc_d1 = port:PC09<3><1><2><default>
sdc_d2 = port:PC10<3><1><2><default>
sdc_d3 = port:PC11<3><1><2><default>
sdc_det =
sdc_use_wp = 0
sdc_wp =
sdc_isio = 0
sdc_regulator = "none"
[mmc3_para]
sdc_used = 0
sdc_detmode = 4
sdc_buswidth = 4
sdc_cmd = port:PI04<2><1><2><default>
sdc_clk = port:PI05<2><1><2><default>
sdc_d0 = port:PI06<2><1><2><default>
sdc_d1 = port:PI07<2><1><2><default>
sdc_d2 = port:PI08<2><1><2><default>
sdc_d3 = port:PI09<2><1><2><default>
sdc_det =
sdc_use_wp = 0
sdc_wp =
sdc_isio = 1
sdc_regulator = "none"
; ------------------------------------------------------------------------------
; memory stick configuration
;-------------------------------------------------------------------------------
[ms_para]
ms_used = 0
ms_bs = port:PH06<5><default><default><default>
ms_clk = port:PH07<5><default><default><default>
ms_d0 = port:PH08<5><default><default><default>
ms_d1 = port:PH09<5><default><default><default>
ms_d2 = port:PH10<5><default><default><default>
ms_d3 = port:PH11<5><default><default><default>
ms_det =
; ------------------------------------------------------------------------------
; sim card configuration
;-------------------------------------------------------------------------------
[smc_para]
smc_used = 0
smc_rst = port:PH13<5><default><default><default>
smc_vppen = port:PH14<5><default><default><default>
smc_vppp = port:PH15<5><default><default><default>
smc_det = port:PH16<5><default><default><default>
smc_vccen = port:PH17<5><default><default><default>
smc_sck = port:PH18<5><default><default><default>
smc_sda = port:PH19<5><default><default><default>
;-------------------------------------------------------------------------------
;ps2 configuration
;-------------------------------------------------------------------------------
[ps2_0_para]
ps2_used = 0
ps2_scl = port:PI20<2><1><default><default>
ps2_sda = port:PI21<2><1><default><default>
[ps2_1_para]
ps2_used = 0
ps2_scl = port:PI14<3><1><default><default>
ps2_sda = port:PI15<3><1><default><default>
;-------------------------------------------------------------------------------
;can bus configuration
;-------------------------------------------------------------------------------
[can_para]
can_used = 0
can_tx = port:PA16<3><default><default><default>
can_rx = port:PA17<3><default><default><default>
;-------------------------------------------------------------------------------
;key matrix
;-------------------------------------------------------------------------------
[keypad_para]
kp_used = 0
kp_in_size = 8
kp_out_size = 8
kp_in0 = port:PH08<4><1><default><default>
kp_in1 = port:PH09<4><1><default><default>
kp_in2 = port:PH10<4><1><default><default>
kp_in3 = port:PH11<4><1><default><default>
kp_in4 = port:PH14<4><1><default><default>
kp_in5 = port:PH15<4><1><default><default>
kp_in6 = port:PH16<4><1><default><default>
kp_in7 = port:PH17<4><1><default><default>
kp_out0 = port:PH18<4><1><default><default>
kp_out1 = port:PH19<4><1><default><default>
kp_out2 = port:PH22<4><1><default><default>
kp_out3 = port:PH23<4><1><default><default>
kp_out4 = port:PH24<4><1><default><default>
kp_out5 = port:PH25<4><1><default><default>
kp_out6 = port:PH26<4><1><default><default>
kp_out7 = port:PH27<4><1><default><default>
;-------------------------------------------------------------------------------
;[usbc0]：控制器0的配置。
;usb_used：USB使能标志。置1，表示系统中USB模块可用,置0,则表示系统USB禁用。
;usb_port_type：USB端口的使用情况。 0：device only;1：host only;2：OTG
;usb_detect_type：USB端口的检查方式。0：不做检测;1：vbus/id检查;2：id/dpdm检查
;usb_id_gpio：USB ID pin脚配置。具体请参考gpio配置说明。
;usb_det_vbus_gpio：USB DET_VBUS pin脚配置。具体请参考gpio配置说明。
;usb_drv_vbus_gpio：USB DRY_VBUS pin脚配置。具体请参考gpio配置说明。
;usb_det_vbus_gpio: "axp_ctrl",表示axp 提供
;usb_restrict_gpio usb限流控制pin
;usb_restric_flag: usb限流标置
;-------------------------------------------------------------------------------
;-------------------------------------------------------------------------------
;--- USB0控制标志
;-------------------------------------------------------------------------------
[usbc0]
usb_used = 1
usb_port_type = 2
usb_detect_type = 1
usb_id_gpio = port:PH04<0><1><default><default>
usb_det_vbus_gpio = "axp_ctrl"
usb_drv_vbus_gpio = port:PB09<1><0><default><0>
usb_ac_enable_gpio = port:PH05<1><0><default><0>
usb_restrict_gpio = 0
usb_host_init_state = 0
usb_restric_flag = 0
usb_restric_voltage = 3550000
usb_restric_capacity= 5
;-------------------------------------------------------------------------------
;--- USB1控制标志
;------------------------------------------------------------------------------
[usbc1]
usb_used = 0
usb_port_type = 1
usb_detect_type = 0
usb_drv_vbus_gpio = port:PH06<1><0><default><0>
usb_restrict_gpio =
usb_host_init_state = 1
usb_restric_flag = 0
;------------------------------------------------------------------------------
;--- USB2控制标志
;------------------------------------------------------------------------------
[usbc2]
usb_used = 1
usb_port_type = 1
usb_detect_type = 0
usb_drv_vbus_gpio = port:PH03<1><0><default><0>
usb_restrict_gpio =
usb_host_init_state = 1
usb_restric_flag = 0
;--------------------------------
;--- USB Device
;--------------------------------
[usb_feature]
vendor_id = 0x18D1
mass_storage_id = 0x0001
adb_id = 0x0002
manufacturer_name = "USB Developer"
product_name = "Android"
serial_number = "20080411"
[msc_feature]
vendor_name = "USB 2.0"
product_name = "USB Flash Driver"
release = 100
luns = 2
;-------------------------------------------------------------------------------
; G sensor configuration
; gs_twi_id --- TWI ID for controlling Gsensor (0: TWI0, 1: TWI1, 2: TWI2)
;-------------------------------------------------------------------------------
[gsensor_para]
gsensor_used = 1
gsensor_twi_id = 1
gsensor_int1 =
gsensor_int2 =
gsensor_direct_x = 0
gsensor_direct_y = 0
gsensor_direct_z = 0
gsensor_xy_revert = 0
;--------------------------------------------------------------------------------
; G sensor automatic detection configuration
;gsensor_detect_used --- Whether startup automatic inspection function. 1:used,0:unused
;Module name postposition 1 said detection, 0 means no detection.
;--------------------------------------------------------------------------------
[gsensor_list_para]
gsensor_det_used = 1
bma250 = 1
mma8452 = 1
mma7660 = 1
mma865x = 1
afa750 = 1
lis3de_acc = 1
lis3dh_acc = 1
kxtik = 1
dmard10 = 0
dmard06 = 1
mxc622x = 1
fxos8700 = 1
lsm303d = 1
stk8312 = 1
;-------------------------------------------------------------------------------
; gps gpio configuration
; gps_spi_id --- the index of SPI controller. 0: SPI0, 1: SPI1, 2: SPI2, 15: no SPI used
; gps_spi_cs_num --- the chip select number of SPI controller. 0: SPI CS0, 1: SPI CS1
; gps_lradc --- the lradc number for GPS used. 0 and 1 is valid, set 2 if not use lradc
;-------------------------------------------------------------------------------
[gps_para]
gps_used = 0
gps_spi_id = 2
gps_spi_cs_num = 0
gps_lradc = 1
gps_clk = port:PI00<2><default><default><default>
gps_sign = port:PI01<2><default><default><default>
gps_mag = port:PI02<2><default><default><default>
gps_vcc_en = port:PC22<1><default><default><0>
gps_osc_en = port:PI14<1><default><default><0>
gps_rx_en = port:PI15<1><default><default><0>
;--------------------------------------------------------------------------------
;wifi configuration
;wifi_sdc_id --- 0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3
;wifi_usbc_id --- 0- USB0, 1- USB1, 2- USB2
;wifi_usbc_type -- 1- EHCI(speed 2.0), 2- OHCI(speed 1.0)
;wifi_mod_sel --- 0- none, 1- bcm40181, 2- bcm40183(wifi+bt),
; 3 - rtl8723as(wifi+bt), 4- rtl8189es(SM89E00),
; 5 - rtl8192cu, 6 - rtl8188eu, 7 - ap6210
;--------------------------------------------------------------------------------
[wifi_para]
wifi_used = 1
wifi_sdc_id = 3
wifi_usbc_id = 2
wifi_usbc_type = 1
wifi_mod_sel = 6
wifi_power = ""
; 1 - bcm40181 sdio wifi gpio config
;bcm40181_shdn = port:PH09<1><default><default><0>
;bcm40181_host_wake = port:PH10<0><default><default><0>
; 2 - bcm40183 sdio wifi gpio config
;bcm40183_wl_regon = port:PH09<1><default><default><0>
;bcm40183_wl_host_wake = port:PH10<0><default><default><0>
;bcm40183_bt_rst = port:PB05<1><default><default><0>
;bcm40183_bt_regon = port:PB05<1><default><default><0>
;bcm40183_bt_wake = port:PI20<1><default><default><0>
;bcm40183_bt_host_wake = port:PI21<0><default><default><0>
; 3 - rtl8723as sdio wifi + bt gpio config
rtk_rtl8723as_wl_dis = port:PH09<1><default><default><0>
rtk_rtl8723as_bt_dis = port:PB05<1><default><default><0>
rtk_rtl8723as_wl_host_wake = port:PH10<0><default><default><0>
rtk_rtl8723as_bt_host_wake = port:PI21<0><default><default><0>
; 4 - rtl8189es sdio wifi gpio config
;rtl8189es_shdn = port:PH09<1><default><default><0>
;rtl8189es_wakeup = port:PH10<1><default><default><1>
; 5 - rtl8192cu usb wifi
; 6 - rtl8188eu usb wifi
; 7 - ap6210 sdio wifi + bt gpio config
ap6xxx_wl_regon = port:PH09<1><default><default><0>
ap6xxx_wl_host_wake = port:PH10<0><default><default><0>
ap6xxx_bt_regon = port:PB05<1><default><default><0>
ap6xxx_bt_wake = port:PI20<1><default><default><0>
ap6xxx_bt_host_wake = port:PI21<0><default><default><0>
;-------------------------------------------------------------------------------
;3G configuration
;-------------------------------------------------------------------------------
[3g_para]
3g_used = 0
3g_usbc_num = 2
3g_uart_num = 0
3g_pwr =
3g_wakeup =
3g_int =
;-------------------------------------------------------------------------------
;gyroscope
;-------------------------------------------------------------------------------
[gy_para]
gy_used = 0
gy_twi_id = 1
gy_twi_addr = 0x00
gy_int1 = port:PH18<6><1><default><default>
gy_int2 = port:PH19<6><1><default><default>
;-------------------------------------------------------------------------------
;light sensor
;-------------------------------------------------------------------------------
[ls_para]
ls_used = 0
ls_twi_id = 1
ls_twi_addr = 0x00
ls_int = port:PH20<6><1><default><default>
;-------------------------------------------------------------------------------
;compass
;-------------------------------------------------------------------------------
[compass_para]
compass_used = 0
compass_twi_id = 1
compass_twi_addr = 0x00
compass_int = port:PI13<6><1><default><default>
;-------------------------------------------------------------------------------
;blue tooth
;bt_used ---- blue tooth used (0- no used, 1- used)
;bt_uard_id ---- uart index
;-------------------------------------------------------------------------------
[bt_para]
bt_used = 1
;bt_uart_id = 2
;bt_wakeup = port:PI20<1><default><default><default>
;bt_gpio = port:PI21<1><default><default><default>
;bt_rst = port:PB05<1><default><default><default>
;--------------------------------------------------------------------------------
;i2s_master:1: SND_SOC_DAIFMT_CBM_CFM(codec clk & FRM master) use
; 2: SND_SOC_DAIFMT_CBS_CFM(codec clk slave & FRM master) not use
; 3: SND_SOC_DAIFMT_CBM_CFS(codec clk master & frame slave) not use
; 4: SND_SOC_DAIFMT_CBS_CFS(codec clk & FRM slave) use
;i2s_select:0 is pcm.1 is i2s
;audio_format: 1:SND_SOC_DAIFMT_I2S(standard i2s format). use
; 2:SND_SOC_DAIFMT_RIGHT_J(right justfied format).
; 3:SND_SOC_DAIFMT_LEFT_J(left justfied format)
; 4:SND_SOC_DAIFMT_DSP_A(pcm. MSB is available on 2nd BCLK rising edge after LRC rising edge). use
; 5:SND_SOC_DAIFMT_DSP_B(pcm. MSB is available on 1nd BCLK rising edge after LRC rising edge)
;signal_inversion:1:SND_SOC_DAIFMT_NB_NF(normal bit clock + frame) use
; 2:SND_SOC_DAIFMT_NB_IF(normal BCLK + inv FRM)
; 3:SND_SOC_DAIFMT_IB_NF(invert BCLK + nor FRM) use
; 4:SND_SOC_DAIFMT_IB_IF(invert BCLK + FRM)
;over_sample_rate: support 128fs/192fs/256fs/384fs/512fs/768fs
;sample_resolution :16bits/20bits/24bits
;word_select_size :16bits/20bits/24bits/32bits
;pcm_sync_period :16/32/64/128/256
;msb_lsb_first :0: msb first; 1: lsb first
;sign_extend :0: zero pending; 1: sign extend
;slot_index :slot index: 0: the 1st slot - 3: the 4th slot
;slot_width :8 bit width / 16 bit width
;frame_width :0: long frame = 2 clock width; 1: short frame
;tx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
;rx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
;--------------------------------------------------------------------------------
[i2s_para]
i2s_used = 0
i2s_channel = 2
i2s_master = 4
i2s_select = 1
audio_format = 1
signal_inversion = 1
over_sample_rate = 256
sample_resolution = 16
word_select_size = 32
pcm_sync_period = 256
msb_lsb_first = 0
sign_extend = 0
slot_index = 0
slot_width = 16
frame_width = 1
tx_data_mode = 0
rx_data_mode = 0
i2s_mclk = port:PB05<2><1><default><default>
i2s_bclk = port:PB06<2><1><default><default>
i2s_lrclk = port:PB07<2><1><default><default>
i2s_dout0 = port:PB08<2><1><default><default>
i2s_dout1 =
i2s_dout2 =
i2s_dout3 =
i2s_din = port:PB12<2><1><default><default>
;--------------------------------------------------------------------------------
;pcm_master:1: SND_SOC_DAIFMT_CBM_CFM(codec clk & FRM master) use
; 2: SND_SOC_DAIFMT_CBS_CFM(codec clk slave & FRM master) not use
; 3: SND_SOC_DAIFMT_CBM_CFS(codec clk master & frame slave) not use
; 4: SND_SOC_DAIFMT_CBS_CFS(codec clk & FRM slave) use
;pcm_select:1 is pcm.0 is i2s
;audio_format: 1:SND_SOC_DAIFMT_I2S(standard i2s format). use
; 2:SND_SOC_DAIFMT_RIGHT_J(right justfied format).
; 3:SND_SOC_DAIFMT_LEFT_J(left justfied format)
; 4:SND_SOC_DAIFMT_DSP_A(pcm. MSB is available on 2nd BCLK rising edge after LRC rising edge). use
; 5:SND_SOC_DAIFMT_DSP_B(pcm. MSB is available on 1nd BCLK rising edge after LRC rising edge)
;signal_inversion:1:SND_SOC_DAIFMT_NB_NF(normal bit clock + frame) use
; 2:SND_SOC_DAIFMT_NB_IF(normal BCLK + inv FRM)
; 3:SND_SOC_DAIFMT_IB_NF(invert BCLK + nor FRM) use
; 4:SND_SOC_DAIFMT_IB_IF(invert BCLK + FRM)
;over_sample_rate: support 128fs/192fs/256fs/384fs/512fs/768fs
;sample_resolution :16bits/20bits/24bits
;word_select_size :16bits/20bits/24bits/32bits
;pcm_sync_period :16/32/64/128/256
;msb_lsb_first :0: msb first; 1: lsb first
;sign_extend :0: zero pending; 1: sign extend
;slot_index :slot index: 0: the 1st slot - 3: the 4th slot
;slot_width :8 bit width / 16 bit width
;frame_width :0: long frame = 2 clock width; 1: short frame
;tx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
;rx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
;--------------------------------------------------------------------------------
[pcm_para]
pcm_used = 0
pcm_channel = 2
pcm_master = 4
pcm_select = 1
audio_format = 4
signal_inversion = 1
over_sample_rate = 256
sample_resolution = 16
word_select_size = 32
pcm_sync_period = 256
msb_lsb_first = 0
sign_extend = 0
slot_index = 0
slot_width = 16
frame_width = 1
tx_data_mode = 0
rx_data_mode = 0
pcm_mclk = port:PA09<6><1><default><default>
pcm_bclk = port:PA14<6><1><default><default>
pcm_lrclk = port:PA15<6><1><default><default>
pcm_dout0 = port:PA16<6><1><default><default>
pcm_dout1 =
pcm_dout2 =
pcm_dout3 =
pcm_din = port:PA17<6><1><default><default>
[spdif_para]
spdif_used = 0
spdif_mclk =
spdif_dout = port:PB13<4><1><default><default>
spdif_din =
[audio_para]
audio_used = 1
audio_pa_ctrl = port:PH15<1><default><default><1>
audio_hp_ctrl = port:PH16<6><default><default><0>
;audio_Smic_ctrl = port:PH22<1><default><default><0>
;audio_hook_ctrl = port:PH20<6><default><default><0>
[switch_para]
switch_used = 1
;-------------------------------------------------------------------------------
;ir --- infra remote configuration
;-------------------------------------------------------------------------------
[ir_para]
ir_used = 0
ir_rx = port:PB04<2><default><default><default>
;-------------------------------------------------------------------------------
;pmu_twi_addr ---slave address
;pmu_twi_id ---i2c bus number (0 TWI0, 1 TWI2, 2 TWI3)
;pmu_irq_id ---irq number (0 irq0,1 irq1,……)
;pmu_battery_rdc ---battery initial resistance,mΩ,根据实际电池内阻填写
;pmu_battery_cap ---battery capability,mAh，根据实际电池容量填写
;pmu_init_chgcur ---set initial charging current limite,mA，300/400/500/600/700/800/900/1000/1100/1200/1300/1400/1500/1600/1700/1800
;pmu_suspend_chgcur ---set suspend charging current limite,mA，300/400/500/600/700/800/900/1000/1100/1200/1300/1400/1500/1600/1700/1800
;pmu_resume_chgcur ---set resume charging current limite,mA，300/400/500/600/700/800/900/1000/1100/1200/1300/1400/1500/1600/1700/1800
;pmu_shutdown_chgcur ---set shutdown charging current limite,mA，300/400/500/600/700/800/900/1000/1100/1200/1300/1400/1500/1600/1700/1800
;pmu_init_chgvol ---set initial charing target voltage,mV,4100/4150/4200/4360
;pmu_init_chgend_rate ---set initial charing end current rate,10/15
;pmu_init_chg_enabled ---set initial charing enabled,0:关闭,1:打开
;pmu_init_adc_freq ---set initial adc frequency,Hz,25/50/100/200
;pmu_init_adc_freqc ---set initial coulomb adc coufrequency,Hz,25/50/100/200
;pmu_init_chg_pretime ---set initial pre-charging time,min,40/50/60/70
;pmu_init_chg_csttime ---set initial constance-charging time,min,360/480/600/720
;pmu_bat_para1 ---battery indication at 3.1328V
;pmu_bat_para2 ---battery indication at 3.2736V
;pmu_bat_para3 ---battery indication at 3.4144V
;pmu_bat_para4 ---battery indication at 3.5552V
;pmu_bat_para5 ---battery indication at 3.6256V
;pmu_bat_para6 ---battery indication at 3.6608V
;pmu_bat_para7 ---battery indication at 3.6960V
;pmu_bat_para8 ---battery indication at 3.7312V
;pmu_bat_para9 ---battery indication at 3.7664V
;pmu_bat_para10 ---battery indication at 3.8016V
;pmu_bat_para11 ---battery indication at 3.8368V
;pmu_bat_para12 ---battery indication at 3.8720V
;pmu_bat_para13 ---battery indication at 3.9424V
;pmu_bat_para14 ---battery indication at 4.0128V
;pmu_bat_para15 ---battery indication at 4.0832V
;pmu_bat_para16 ---battery indication at 4.1536V
;pmu_usbvol ---set usb-ac limited voltage level,mV,4000/4100/4200/4300/4400/4500/4600/4700,0 - not limite
;pmu_usbcur ---set usb-ac limited voltage level,mA,100/500/900, 0 - not limite
;pmu_usbvol_pc ---set usb-pc limited voltage level,mV,4000/4100/4200/4300/4400/4500/4600/4700,0 - not limite
;pmu_usbcur_pc ---set usb-pc limited voltage level,mA,100/500/900, 0 - not limite
;pmu_pwroff_vol ---set protect voltage when system start up,mV,2600/2700/2800/2900/3000/3100/3200/3300
;pmu_pwron_vol ---set protect voltage after system start up,mV,2600/2700/2800/2900/3000/3100/3200/3300
;pmu_pekoff_time ---set pek off time,ms, 4000/6000/8000/10000
;pmu_pekoff_en ---set pek off enable, 0:关闭,1:打开
;pmu_peklong_time ---set pek pek long irq time,ms,1000/1500/2000/2500
;pmu_pekon_time ---set pek on time,ms,128/1000/2000/3000
;pmu_pwrok_time ---set pmu pwrok delay time,ms,8/64
;pmu_pwrnoe_time ---set pmu n_oe power down delay time,ms,128/1000/2000/3000
;pmu_intotp_en ---set pmu power down when overtempertur enable,0:关闭，1：打开
;pmu_suspendpwroff_vol ---set pmu shutdown voltage when cpu is suspend and battery voltage is low
;pmu_batdeten ---set pmu battery detect enabled,0:关闭，1：打开
;-------------------------------------------------------------------------------
[pmu_para]
pmu_used = 1
pmu_twi_addr = 0x34
pmu_twi_id = 0
pmu_irq_id = 32
pmu_battery_rdc = 100
pmu_battery_cap = 4000
pmu_init_chgcur = 300
pmu_earlysuspend_chgcur = 600
pmu_suspend_chgcur = 1200
pmu_resume_chgcur = 300
pmu_shutdown_chgcur = 1200
pmu_init_chgvol = 4200
pmu_init_chgend_rate = 10
pmu_init_chg_enabled = 1
pmu_init_adc_freq = 100
pmu_init_adc_freqc = 100
pmu_init_chg_pretime = 50
pmu_init_chg_csttime = 720
pmu_bat_para1 = 0
pmu_bat_para2 = 0
pmu_bat_para3 = 0
pmu_bat_para4 = 0
pmu_bat_para5 = 4
pmu_bat_para6 = 8
pmu_bat_para7 = 14
pmu_bat_para8 = 22
pmu_bat_para9 = 32
pmu_bat_para10 = 46
pmu_bat_para11 = 53
pmu_bat_para12 = 62
pmu_bat_para13 = 73
pmu_bat_para14 = 84
pmu_bat_para15 = 91
pmu_bat_para16 = 100
pmu_usbvol_limit = 1
pmu_usbcur_limit = 0
pmu_usbvol = 4600
pmu_usbcur = 0
pmu_usbvol_pc = 4600
pmu_usbcur_pc = 500
pmu_pwroff_vol = 3300
pmu_pwron_vol = 2900
pmu_pekoff_time = 6000
pmu_pekoff_en = 1
pmu_peklong_time = 1500
pmu_pekon_time = 1000
pmu_pwrok_time = 64
pmu_pwrnoe_time = 2000
pmu_intotp_en = 1
pmu_used2 = 0
pmu_adpdet = port:PH02<0><default><default><default>
pmu_init_chgcur2 = 400
pmu_earlysuspend_chgcur2 = 600
pmu_suspend_chgcur2 = 1200
pmu_resume_chgcur2 = 400
pmu_shutdown_chgcur2 = 1200
pmu_suspendpwroff_vol = 3500
pmu_batdeten = 1
[recovery_key]
key_min = 4
key_max = 40
;KEY_RESERVED 0, KEY_BACK 158, KEY_HOME 102, KEY_MENU 139, KEY_VOLUMEDOWN 114, KEY_VOLUMEUP 115, KEY_CAMERA 212, kEY_ESC 1,KEY_SEARCH 217
key_map = "158,115,114,0,0,0,0,0,0,0,0,0,0"
;broncho add end
;----------------------------------------------------------------------------------
; dvfs voltage-frequency table configuration
;
; max_freq: cpu maximum frequency, based on Hz, can not be more than 1008MHz
; min_freq: cpu minimum frequency, based on Hz, can not be less than 60MHz
;
; LV_count: count of LV_freq/LV_volt, must be < 16
;
; LV1: core vdd is 1.45v if cpu frequency is (912Mhz, 1008Mhz]
; LV2: core vdd is 1.40v if cpu frequency is (864Mhz, 912Mhz]
; LV3: core vdd is 1.30v if cpu frequency is (792Mhz, 864Mhz]
; LV4: core vdd is 1.25v if cpu frequency is (720Mhz, 792Mhz]
; LV5: core vdd is 1.20v if cpu frequency is (624Mhz, 720Mhz]
; LV6: core vdd is 1.15v if cpu frequency is (528Mhz, 624Mhz]
; LV7: core vdd is 1.10v if cpu frequency is (312Mhz, 528Mhz]
; LV8: core vdd is 1.05v if cpu frequency is ( 60Mhz, 312Mhz]
;
;----------------------------------------------------------------------------------
[dvfs_table]
max_freq = 912000000
normal_freq = 720000000
min_freq = 60000000
LV_count = 8
LV1_freq = 1008000000
LV1_volt = 1450
LV2_freq = 912000000
LV2_volt = 1400
LV3_freq = 864000000
LV3_volt = 1350
LV4_freq = 792000000
LV4_volt = 1350
LV5_freq = 720000000
LV5_volt = 1350
LV6_freq = 624000000
LV6_volt = 1300
LV7_freq = 528000000
LV7_volt = 1250
LV8_freq = 312000000
LV8_volt = 1200
[hwinfo]
para_num = 2
hw_para1 = "BT=y"
hw_para2 = "AUDIO_PAM=4"
Прошивка планшета на AllWinner A20 dual core
добрый вечер, помогите пожалуйста подобрать прошивку на апачи а 903(http://allo.ua/ru/products/internet-pla ... ?tab=specs)
планшет превратился в кирпич, пытаюсь его запустить , перерыл уже кучу всего, Вы последний вариант. с помощью фоникс кард пытаюсь сделать автозагрузку, но не одна прошивка не подходит, весь экран в артефактах и неприятный скрежит из динамиков, вобщем не оно.... бутлодер и рекавери тоже слители..... вобщем уже не знаю чем его победить, ну надеюсь хоть с прошивки родной начать.....
вот, снимки апачи а 903
планшет превратился в кирпич, пытаюсь его запустить , перерыл уже кучу всего, Вы последний вариант. с помощью фоникс кард пытаюсь сделать автозагрузку, но не одна прошивка не подходит, весь экран в артефактах и неприятный скрежит из динамиков, вобщем не оно.... бутлодер и рекавери тоже слители..... вобщем уже не знаю чем его победить, ну надеюсь хоть с прошивки родной начать.....
вот, снимки апачи а 903
Прошивка планшета на AllWinner A20 dual core
Прошивка планшета на AllWinner A20 dual core
качаю
Добавлено спустя 32 минуты 1 секунду:
планшет запустился, только сенсор отвалился, сейчас переберу, посмотрю тач намести или нет, теперь думаю как эту прошивку на внутренюю память залить.... Огромное спасибо...
Добавлено спустя 32 минуты 1 секунду:
планшет запустился, только сенсор отвалился, сейчас переберу, посмотрю тач намести или нет, теперь думаю как эту прошивку на внутренюю память залить.... Огромное спасибо...
Прошивка планшета на AllWinner A20 dual core
Прочитай A903 там написано если с тачем проблемка. Прошивай через феникс карту !макес писал(а):качаю
Добавлено спустя 32 минуты 1 секунду:
планшет запустился, только сенсор отвалился, сейчас переберу, посмотрю тач намести или нет, теперь думаю как эту прошивку на внутренюю память залить.... Огромное спасибо...
Прошивка планшета на AllWinner A20 dual core
сделал автозагрузку через феникс карту, запустил, потом через отг-кабель подключил мышьку т.к. тач не работал, включил отладку и подключил к феникс сьюит, прошил без флешки теперь...... жду пока загрузится..... как и что с этого получится отпишусь....
Добавлено спустя 1 час 47 минут 59 секунд:
вобщем тач скрин осилить я не могу, не хочет работать..... мозгов не хватает((( а сенсор после перезагрузки стал адекватно реагировать.
Добавлено спустя 15 часов 27 минут 29 секунд:
помогите понять откуда брать в драконе нужные модули.
Добавлено спустя 1 час 47 минут 59 секунд:
вобщем тач скрин осилить я не могу, не хочет работать..... мозгов не хватает((( а сенсор после перезагрузки стал адекватно реагировать.
Добавлено спустя 15 часов 27 минут 29 секунд:
помогите понять откуда брать в драконе нужные модули.