Прошивка планшетов на AllWinner A10 и A13
Добавлено: 13.10.2015 22:33
Hans od
его родная прошивкаBlaze писал(а): Hans od, ошибок в логе нет. Пробуйте протестировать работу планшета на другой подходящей прошивке.
u0_a54@android:/ $ su
u0_a54@android:/ # dmeesg | grep nand
sh: grep: not found
sh: dmeesg: not found
127|u0_a54@android:/ # dmesg
<6>[ 0.000000] Initializing cgroup subsys cpuset
<5>[ 0.000000] Linux version 3.0.8+ (weidi@brn-weidi) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #36 PREEMPT Tue Apr 23 12:02:30 CST 2013
<4>[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387f
<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: sun5i
<6>[ 0.000000] Total Detected Memory: 512MB with 2 banks
<6>[ 0.000000] Memory Reserved(in bytes):
<6>[ 0.000000] LCD: 0x48000000, 0x01000000
<6>[ 0.000000] SYS: 0x43000000, 0x00010000
<6>[ 0.000000] VE : 0x44000000, 0x04000000
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[ 0.000000] On node 0 totalpages: 114688
<7>[ 0.000000] free_area_init_node: node 0, pgdat c08e7910, node_mem_map c0aab000
<7>[ 0.000000] Normal zone: 1024 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 113664 pages, LIFO batch:31
<7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[ 0.000000] pcpu-alloc: [0] 0
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113664
<5>[ 0.000000] Kernel command line: console=ttyS0,115200 rw init=/init loglevel=5
<6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] Memory: 144MB 304MB = 448MB total
<5>[ 0.000000] Memory: 361296k/361296k available, 97456k reserved, 0K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
<5>[ 0.000000] vmalloc : 0xe0800000 - 0xf0000000 ( 248 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .init : 0xc0008000 - 0xc0032000 ( 168 kB)
<5>[ 0.000000] .text : 0xc0032000 - 0xc07f54e8 (7950 kB)
<5>[ 0.000000] .data : 0xc07f6000 - 0xc08ee9c8 ( 995 kB)
<5>[ 0.000000] .bss : 0xc08ee9ec - 0xc0aaafc0 (1778 kB)
<6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>[ 0.000000] NR_IRQS:96 nr_irqs:96 96
<6>[ 0.000000] timer0: Periodic Mode
<4>[ 0.000000] sw_timer_init,line:372
<6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<4>[ 0.000000] aw_clksrc_init, line:339
<6>[ 0.000000] Console: colour dummy device 80x30
<3>[ 0.000000] ram_console: buffer (null), invalid size 0, datasize 4294967284
<6>[ 0.000113] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
<6>[ 0.040020] pid_max: default: 32768 minimum: 301
<6>[ 0.040135] Mount-cache hash table entries: 512
<6>[ 0.040441] Initializing cgroup subsys cpuacct
<6>[ 0.040460] Initializing cgroup subsys devices
<6>[ 0.040470] Initializing cgroup subsys freezer
<6>[ 0.040480] Initializing cgroup subsys blkio
<6>[ 0.040550] CPU: Testing write buffer coherency: ok
<6>[ 0.040749] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
<6>[ 0.041253] devtmpfs: initialized
<6>[ 0.042460] print_constraints: dummy:
<3>[ 0.042502] script_parser_fetch err.
<3>[ 0.042509] script_parser_fetch err.
<3>[ 0.042515] script_parser_fetch err.
<6>[ 0.042627] NET: Registered protocol family 16
<6>[ 0.043150] hw-breakpoint: debug architecture 0x4 unsupported.
<4>[ 0.043580] try to parse apb frequency from script faild!
<4>[ 0.043669] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
<6>[ 0.043729] Initialize DMAC OK
<6>[ 0.047904] bio: create slab <bio-0> at 0
<5>[ 0.048461] SCSI subsystem initialized
<6>[ 0.048668] usbcore: registered new interface driver usbfs
<6>[ 0.048733] usbcore: registered new interface driver hub
<6>[ 0.048869] usbcore: registered new device driver usb
<6>[ 0.049271] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[ 0.049905] cfg80211: Calling CRDA to update world regulatory domain
<4>[ 0.049992] Init eGon pin module V2.0
<6>[ 0.050000] Switching to clocksource aw 64bits couter
<5>[ 0.050000] FS-Cache: Loaded
<6>[ 0.050000] CacheFiles: Loaded
<6>[ 0.050000] Switched to NOHz mode on CPU #0
<4>[ 0.050000] [usb_manager]: CONFIG_USB_SW_SUN5I_USB0_OTG
<4>[ 0.050000] [sw_hcd0]: usb host driver initialize........
<4>[ 0.050000] [sw_hcd0]: open_usb_clock
<4>[ 0.065330] [sw_hcd0]: host_init_state = 0
<4>[ 0.065339] [sw_hcd0]: platform is usb host
<4>[ 0.065405] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
<6>[ 0.065428] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
<6>[ 0.065444] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
<6>[ 0.065937] hub 1-0:1.0: USB hub found
<6>[ 0.065964] hub 1-0:1.0: 1 port detected
<4>[ 0.065990] wrn: hcd is not enable, need not start hcd
<4>[ 0.066174] [sw_hcd0]: sw_usb_host0_disable start
<4>[ 0.066186] -------sw_hcd0_soft_disconnect---------
<4>[ 0.066197] is_on = 0, hcd0_set_vbus_cnt = -1
<4>[ 0.066204] wrn: hcd is not enable, need not stop hcd
<4>[ 0.066236] [sw_hcd0]: close_usb_clock
<4>[ 0.066272] [sw_hcd0]: sw_usb_host0_disable end
<4>[ 0.066309] [sw_udc]: udc_init: version 20080411
<6>[ 0.066645] NET: Registered protocol family 2
<6>[ 0.066760] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.067023] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[ 0.067247] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.067379] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 0.067389] TCP reno registered
<6>[ 0.067399] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.067416] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.067560] NET: Registered protocol family 1
<6>[ 0.067874] RPC: Registered named UNIX socket transport module.
<6>[ 0.067886] RPC: Registered udp transport module.
<6>[ 0.067894] RPC: Registered tcp transport module.
<6>[ 0.067901] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[ 0.068078] Trying to unpack rootfs image as initramfs...
<6>[ 0.114219] Freeing initrd memory: 516K
<6>[ 0.114302] PMU: registered new PMU device of type 0
<4>[ 0.114363] [pm]aw_pm_init!
<6>[ 0.114376] standby_mode = 0.
<3>[ 0.114382] aw_pm_init: not support super standby.
<6>[ 0.114591] audit: initializing netlink socket (disabled)
<5>[ 0.114637] type=2000 audit(0.109:1): initialized
<6>[ 0.124265] ashmem: initialized
<5>[ 0.130000] VFS: Disk quotas dquot_6.5.2
<4>[ 0.130291] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>[ 0.133106] NTFS driver 2.1.30 [Flags: R/W].
<6>[ 0.133409] fuse init (API version 7.16)
<6>[ 0.133955] msgmni has been set to 706
<6>[ 0.138238] alg: No test for stdrng (krng)
<6>[ 0.138481] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>[ 0.138498] io scheduler noop registered
<6>[ 0.138506] io scheduler deadline registered
<6>[ 0.138584] io scheduler cfq registered (default)
<6>[ 0.139231] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[ 0.141125] brd: module loaded
<6>[ 0.142864] loop: module loaded
<6>[ 0.142967] sunxi debug register driver init
<4>[ 0.143325] drivers/spi/spi_sunxi.c(L2114) sw spi init fetch spi0 uning configuration failed
<4>[ 0.143346] drivers/spi/spi_sunxi.c(L2005) Get spi devices number failed
<4>[ 0.143357] drivers/spi/spi_sunxi.c(L2124) register spi devices board info failed
<4>[ 0.143367] cannot find any using configuration for all spi controllers!
<6>[ 0.143388] PPP generic driver version 2.4.2
<6>[ 0.143544] PPP Deflate Compression module registered
<6>[ 0.143555] PPP BSD Compression module registered
<6>[ 0.144570] PPP MPPE Compression module registered
<6>[ 0.144586] NET: Registered protocol family 24
<6>[ 0.144632] PPTP driver version 0.8.5
<6>[ 0.144956] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.144964] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[ 0.145236] usbcore: registered new interface driver cdc_ether
<6>[ 0.145281] usbcore: registered new interface driver cdc_eem
<6>[ 0.145323] usbcore: registered new interface driver cdc_subset
<6>[ 0.145367] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.145424] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 0.145533] usbcore: registered new interface driver cdc_acm
<6>[ 0.145541] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[ 0.145550] Initializing USB Mass Storage driver...
<6>[ 0.145640] usbcore: registered new interface driver usb-storage
<6>[ 0.145648] USB Mass Storage support registered.
<6>[ 0.145690] usbcore: registered new interface driver ums-alauda
<6>[ 0.145734] usbcore: registered new interface driver ums-cypress
<6>[ 0.145775] usbcore: registered new interface driver ums-datafab
<6>[ 0.145824] usbcore: registered new interface driver ums_eneub6250
<6>[ 0.145867] usbcore: registered new interface driver ums-freecom
<6>[ 0.145909] usbcore: registered new interface driver ums-isd200
<6>[ 0.145950] usbcore: registered new interface driver ums-jumpshot
<6>[ 0.145997] usbcore: registered new interface driver ums-karma
<6>[ 0.146040] usbcore: registered new interface driver ums-onetouch
<6>[ 0.146094] usbcore: registered new interface driver ums-realtek
<6>[ 0.146136] usbcore: registered new interface driver ums-sddr09
<6>[ 0.146184] usbcore: registered new interface driver ums-sddr55
<6>[ 0.146229] usbcore: registered new interface driver ums-usbat
<6>[ 0.146349] usbcore: registered new interface driver usbserial
<6>[ 0.146390] USB Serial support registered for generic
<6>[ 0.146439] usbcore: registered new interface driver usbserial_generic
<6>[ 0.146448] usbserial: USB Serial Driver core
<6>[ 0.146483] USB Serial support registered for GSM modem (1-port)
<6>[ 0.146602] usbcore: registered new interface driver option
<6>[ 0.146610] option: v0.7.2:USB Driver for GSM modems
<4>[ 0.146646] ------print_msc_config-----
<4>[ 0.146653] vendor_id = 0x18d1
<4>[ 0.146660] mass_storage_id = 0x1
<4>[ 0.146666] adb_id = 0x2
<4>[ 0.146672] usb_manufacturer_name = USB Developer
<4>[ 0.146679] usb_product_name = Android
<4>[ 0.146685] usb_serial_number = 20080411
<4>[ 0.146692] msc_vendor_name = USB 2.0
<4>[ 0.146700] msc_product_name = USB Flash Driver
<4>[ 0.146707] msc_release = 100
<4>[ 0.146713] luns = 2
<4>[ 0.146719] ---------------------------
<4>[ 0.146870] [sw_udc]: [sw_usb_udc]: binding gadget driver 'android_usb'
<4>[ 0.146885] [sw_udc]: alloc request: ep(0xc08d1380, ep0, 64), req(0xdf08df80)
<4>[ 0.146901] WRN:L2712(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
<4>[ 0.146915] [sw_udc]: sw_udc_pullup, is_on = 0
<4>[ 0.146925] WRN:L2747(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
<6>[ 0.148120] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 0.148137] android_usb gadget: Number of LUNs=2
<6>[ 0.148147] lun0: LUN: removable file: (no medium)
<6>[ 0.148155] lun1: LUN: removable file: (no medium)
<4>[ 0.148166] lun name: lun
<4>[ 0.148178] lun name: lun1
<4>[ 0.148338] WRN:L2712(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
<6>[ 0.148359] android_usb gadget: android_usb ready
<6>[ 0.148486] mousedev: PS/2 mouse device common for all mice
<4>[ 0.148571] scan_code 0x0
<6>[ 0.148592] keyboard map config:115,114,158,0,0,0,0,0,0,0,0,0,0
<6>[ 0.148778] input: sw-keyboard as /devices/virtual/input/input0
<4>[ 0.148896] ==register_early_suspend =
<6>[ 0.149316] i2c /dev entries driver
<4>[ 0.149443] !!! base_Addr = 0xe08f6c00
<4>[ 0.149465] config i2c gpio with gpio_config api
<4>[ 0.149521] twi0, apb clock = 24000000
<6>[ 0.151538] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
<4>[ 0.152511] rtc_detect,line:197
<6>[ 0.152520] I2C: i2c-0: AW16XX I2C adapter
<4>[ 0.152526] **********start************
<4>[ 0.152533] 0x40
<4>[ 0.152538] 0xf8
<4>[ 0.152543] 0x28
<4>[ 0.152548] 0x0
<4>[ 0.152552] 0x0
<4>[ 0.152557] **********end************
<4>[ 0.152601] !!! base_Addr = 0xe08f8000
<4>[ 0.152654] twi1, apb clock = 24000000
<6>[ 0.152862] rtc_detect: Detected chip pcf8563 at adapter 1, address 0x51
<6>[ 0.152937] pcf8563 1-0051: chip found, driver version 0.4.3
<4>[ 0.156653] rtc (null): alarm rollover not handled
<6>[ 0.156851] using rtc device, pcf8563, for alarms
<6>[ 0.156889] pcf8563 1-0051: rtc core: registered pcf8563 as rtc0
<6>[ 0.159421] I2C: i2c-1: AW16XX I2C adapter
<4>[ 0.159429] **********start************
<4>[ 0.159435] 0x40
<4>[ 0.159440] 0xf8
<4>[ 0.159445] 0x58
<4>[ 0.159450] 0x0
<4>[ 0.159454] 0x0
<4>[ 0.159458] **********end************
<4>[ 0.159503] !!! base_Addr = 0xe08fa400
<4>[ 0.159557] twi2, apb clock = 24000000
<4>[ 0.159744] rtc_detect,line:197
<6>[ 0.159752] I2C: i2c-2: AW16XX I2C adapter
<4>[ 0.159758] **********start************
<4>[ 0.159764] 0x40
<4>[ 0.159769] 0xf8
<4>[ 0.159773] 0x58
<4>[ 0.159778] 0x0
<4>[ 0.159783] 0x0
<4>[ 0.159787] **********end************
<6>[ 0.159940] lirc_dev: IR Remote Control driver registered, major 250
<6>[ 0.159950] IR NEC protocol handler initialized
<6>[ 0.159957] IR RC5(x) protocol handler initialized
<6>[ 0.159964] IR RC6 protocol handler initialized
<6>[ 0.159971] IR JVC protocol handler initialized
<6>[ 0.159977] IR Sony protocol handler initialized
<6>[ 0.159985] IR RC5 (streamzap) protocol handler initialized
<6>[ 0.159992] IR LIRC bridge handler initialized
<6>[ 0.159999] Linux video capture interface: v2.00
<4>[ 0.160177] [pa_drv] start!!!
<4>[ 0.160461] [pa_drv] init end!!!
<6>[ 0.160578] print_constraints: axp20_ldo1: 1300 mV
<6>[ 0.161506] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
<6>[ 0.162622] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 3300 mV
<6>[ 0.163531] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 3300 mV
<6>[ 0.164425] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1500 mV
<6>[ 0.165315] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1400 mV
<6>[ 0.165698] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
<6>[ 0.165957] input: axp20-supplyer as /devices/platform/sun5i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
<4>[ 0.173227] pmu_pekoff_time = 6000
<4>[ 0.173237] pmu_pekoff_en = 1
<4>[ 0.173243] pmu_peklong_time = 1500
<4>[ 0.173249] pmu_pekon_time = 1000
<4>[ 0.173255] pmu_pwrok_time = 64
<4>[ 0.173260] pmu_pwrnoe_time = 2000
<4>[ 0.173266] pmu_intotp_en = 1
<4>[ 0.173737] [AXP]POWER20_OFF_CTL:2012-->0x42
<4>[ 0.174209] POWER20_PEK_SET:2029-->0x9d
<4>[ 0.174680] POWER20_PEK_SET:2040-->0x9d
<4>[ 0.175151] POWER20_PEK_SET:2049-->0x9d
<4>[ 0.175621] POWER20_PEK_SET:2060-->0x9d
<4>[ 0.176093] POWER20_PEK_SET:2072-->0x9d
<4>[ 0.176564] POWER20_HOTOVER_CTL:2081-->0xad
<4>[ 0.180300] [AXP]last_rest_vol = 100, now_rest_vol = 96
<4>[ 0.181812] [AXP]Cur_CoulombCounter = 0
<4>[ 0.181821] [AXP]charger->rest_vol = 100
<6>[ 0.184543] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
<6>[ 0.184957] device-mapper: multipath: version 1.3.0 loaded
<6>[ 0.184971] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>[ 0.184982] device-mapper: multipath queue-length: version 0.1.0 loaded
<6>[ 0.184992] device-mapper: multipath service-time: version 0.2.0 loaded
<4>[ 0.185478] [mmc_pm]: no sdio card used in configuration
<4>[ 0.185489] [mmc]: sunximmc_init
<4>[ 0.185597] [mmc]: sunxi mmc controller using config : 0x1
<4>[ 0.185656] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
<4>[ 0.185986] [mmc]: mmc 0 power off !!
<4>[ 0.186069] [mmc]: mmc0 Probe: base:0xe08fc000 irq:32 dma:0 pdes:0xffdff000, ret 0.
<6>[ 0.186717] usbcore: registered new interface driver usbhid
<6>[ 0.186730] usbhid: USB HID core driver
<6>[ 0.187162] logger: created 256K log 'log_main'
<6>[ 0.187243] logger: created 256K log 'log_events'
<6>[ 0.187317] logger: created 256K log 'log_radio'
<6>[ 0.187391] logger: created 256K log 'log_system'
<4>[ 0.187944] enter sun5i Audio codec!!!
<6>[ 0.188647] sun5i audio support initialized
<4>[ 0.188875] sun5i Audio codec successfully loaded..
<4>[ 0.188927] [audio]sun5i_codec_init fetch audio_capture_gain failed
<4>[ 0.188938] [audio]sun5i_codec_init fetch audio_input_gain failed
<6>[ 0.188946] ALSA device list:
<6>[ 0.188955] #0: sun5i-CODEC Audio Codec
<6>[ 0.189106] Netfilter messages via NETLINK v0.30.
<6>[ 0.189193] nf_conntrack version 0.5.0 (5653 buckets, 22612 max)
<6>[ 0.189683] ctnetlink v0.93: registering with nfnetlink.
<6>[ 0.189698] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 0.189707] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 0.189991] IPv4 over IPv4 tunneling driver
<6>[ 0.190430] GRE over IPv4 demultiplexor driver
<6>[ 0.190441] GRE over IPv4 tunneling driver
<6>[ 0.190934] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 0.191086] TCP cubic registered
<6>[ 0.191094] Initializing XFRM netlink socket
<6>[ 0.191862] NET: Registered protocol family 10
<6>[ 0.192663] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 0.192837] IPv6 over IPv4 tunneling driver
<6>[ 0.193590] NET: Registered protocol family 17
<6>[ 0.193637] NET: Registered protocol family 15
<6>[ 0.193652] L2TP core driver, V2.0
<6>[ 0.193668] PPPoL2TP kernel driver, V2.0
<6>[ 0.193674] L2TP IP encapsulation support (L2TPv3)
<6>[ 0.193887] L2TP netlink interface
<6>[ 0.193924] L2TP ethernet pseudowire support (L2TPv3)
<6>[ 0.193934] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
<5>[ 0.193966] Registering SWP/SWPB emulation handler
<4>[ 0.194205] dram_sysdev_init finished!
<6>[ 0.195154] registered taskstats version 1
<4>[ 0.195184] [LCD] lcd_module_init
<4>[ 0.196845] [DISP WRN] file:drivers/video/sun5i/disp/de_bsp/de/disp_lcd.c,line:324: fetch script data lcd0_para.lcd_max_bright set as default 223
<4>[ 0.196870] [DISP WRN] file:drivers/video/sun5i/disp/de_bsp/de/disp_lcd.c,line:335: fetch script data lcd0_para.lcd_min_bright set as default 64
<4>[ 0.763488] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
<4>[ 0.763769] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
<4>[ 0.764037] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
<4>[ 0.764303] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
<4>[ 0.764569] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
<4>[ 0.764836] regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
<4>[ 0.764915] WRN:L118(drivers/usb/host/sw_hci_sun5i.c):ERR: get usb_drv_vbus_1_gpio usbc1(usbc1) id failed
<4>[ 0.764931] WRN:L138(drivers/usb/host/sw_hci_sun5i.c):ERR: sw-ehci1(drv vbus_1) is invalid
<4>[ 0.764965] WRN:L118(drivers/usb/host/sw_hci_sun5i.c):ERR: get usb_drv_vbus_1_gpio usbc1(usbc1) id failed
<4>[ 0.764980] WRN:L138(drivers/usb/host/sw_hci_sun5i.c):ERR: sw-ohci1(drv vbus_1) is invalid
<4>[ 0.765608] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc09a0c2c
<4>[ 0.765623] [sw-ehci1]: open clock
<4>[ 0.785620] usb_passby en=1,passly=0
<4>[ 0.785629] hci_port_configure en=1,config_cnt=0
<4>[ 0.785639] [sw-ehci1]: sw_set_vbus cnt 1
<4>[ 0.785646] [sw-ehci1]: Set USB Power ON
<6>[ 0.786394] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.786428] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
<6>[ 0.786547] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
<6>[ 0.800047] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
<4>[ 0.800061] ehci_irq: port change detect
<6>[ 0.800591] hub 2-0:1.0: USB hub found
<6>[ 0.800620] hub 2-0:1.0: 1 port detected
<4>[ 0.800853] [sw-ehci1]: sw_usb_disable_ehci
<4>[ 0.800866] [sw-ehci1]: remove, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc09a0c2c
<6>[ 0.800876] sw-ehci sw-ehci.1: remove, state 1
<6>[ 0.800896] usb usb2: USB disconnect, device number 1
<6>[ 0.801616] sw-ehci sw-ehci.1: USB bus 2 deregistered
<4>[ 0.801632] [sw-ehci1]: sw_set_vbus cnt 0
<4>[ 0.801640] [sw-ehci1]: Set USB Power OFF
<4>[ 0.802128] hci_port_configure en=0,config_cnt=1
<4>[ 0.802140] usb_passby en=0,passly=1
<4>[ 0.802147] [sw-ehci1]: close clock
<4>[ 0.802289] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc09a0d84
<4>[ 0.802303] [sw-ohci1]: open clock
<4>[ 0.822334] hci_port_configure en=1,config_cnt=0
<4>[ 0.822343] usb_passby en=1,passly=0
<4>[ 0.822350] [sw-ohci1]: sw_set_vbus cnt 1
<4>[ 0.822358] [sw-ohci1]: Set USB Power ON
<6>[ 0.823098] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>[ 0.823125] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
<6>[ 0.823159] sw-ohci sw-ohci.1: irq 40, io mem 0xf1c14400
<6>[ 0.884436] hub 2-0:1.0: USB hub found
<6>[ 0.884459] hub 2-0:1.0: 1 port detected
<4>[ 0.884656] [sw-ohci1]: sw_usb_disable_ohci
<4>[ 0.884668] [sw-ohci1]: remove, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc09a0d84
<6>[ 0.884679] sw-ohci sw-ohci.1: remove, state 1
<6>[ 0.884696] usb usb2: USB disconnect, device number 1
<6>[ 0.885012] sw-ohci sw-ohci.1: USB bus 2 deregistered
<4>[ 0.885026] [sw-ohci1]: sw_set_vbus cnt 0
<4>[ 0.885033] [sw-ohci1]: Set USB Power OFF
<4>[ 0.885521] usb_passby en=0,passly=1
<4>[ 0.885531] hci_port_configure en=0,config_cnt=1
<4>[ 0.885539] [sw-ohci1]: close clock
<4>[ 0.885589] portpm init---------
<4>[ 0.885761] portpm probe begin
<4>[ 0.885781] ERR: get pm_cfg:restrict_1a failed
<4>[ 0.885789] ERR: get pm_cfg:restrict_500ma failed
<4>[ 0.885798] ERR: get pm_cfg:v_1a failed
<4>[ 0.885809] ERR: get pm_cfg:c_1a failed
<4>[ 0.885816] ERR: get pm_cfg:v_500ma failed
<4>[ 0.885824] ERR: get pm_cfg:c_500ma failed
<4>[ 0.885831] ERR: get pm_cfg:v_disable failed
<4>[ 0.885839] ERR: get pm_cfg:c_disable failed
<4>[ 0.885847] ERR: get pm_cfg:ctrl_gpio failed
<4>[ 0.885869] restrict_1a = 0, restrict_500ma = 0
<4>[ 0.885873] v_1a = 0, c_1a = 0, v_500ma = 0, c_500ma = 0
<4>[ 0.885878] v_disable = 0, c_disable = 0
<4>[ 0.885882] ignore_usbc_num[0] = 0
<4>[ 0.885885] ignore_usbc_num[1] = 1
<4>[ 0.885889] ignore_usbc_num[2] = 0
<4>[ 0.885899] request ctrl gpio failed
<6>[ 0.887177] pcf8563 1-0051: setting system clock to 2015-10-13 19:18:03 UTC (1444763883)
<4>[ 0.887306] Warning: unable to open an initial console.
<6>[ 0.887355] Freeing init memory: 168K
<3>[ 0.890368] init: /init.rc: 558: ignored duplicate definition of service 'iprenew_wlan0'
<3>[ 0.891207] init: /init.topwise.boot.rc: 24: invalid command 'sleep'
<4>[ 0.891686] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<3>[ 0.933258] init: width = 800
<3>[ 0.933281] init: height = 480
<3>[ 0.933292] init: s.st_size = 1536000
<6>[ 0.942269] init: command 'loglevel' r=0
<6>[ 0.942317] init: command 'export' r=0
<6>[ 0.942333] init: command 'export' r=0
<6>[ 0.942346] init: command 'export' r=0
<6>[ 0.942358] init: command 'export' r=0
<6>[ 0.942371] init: command 'export' r=0
<6>[ 0.942384] init: command 'export' r=0
<6>[ 0.942396] init: command 'export' r=0
<6>[ 0.942409] init: command 'export' r=0
<6>[ 0.942474] init: command 'export' r=0
<4>[ 0.955204] hello:init_nand_libmodule,21
<4>[ 0.955222] hello:init_nand_libmodule,22
<4>[ 0.955229] nand_init,line:1334
<4>[ 0.955241] [NAND]nand driver, init.
<4>[ 0.955251] [NAND] nand driver version: 0x2, 0x11, data: 20130104
<4>[ 0.955259] [NAND] nand driver: secure debug v1.2.9, 20121103, 13:09
<4>[ 0.955267] [NAND] nand clk request start
<4>[ 0.955289] [NAND] nand clk request ok!
<4>[ 0.955337] [NAND] nand gpio_request
<4>[ 0.955398] [NAND] nand gpio_request fail
<4>[ 0.955412] NAND_RequestDMA ok
<4>[ 0.955773] [NAND] nand driver version: 0x2 0x11
<4>[ 0.955807] nand interrupte register ok
<4>[ 0.955820] nand init fetch nand_good_block_ratio failed
<4>[ 0.955844] Request memory for lsb page table
<4>[ 0.955852] page type: 0
<4>[ 0.955859] Init lsb page table ok
<4>[ 0.992762] The 0 disk name = bootloader, class name = DISK, disk size = df12a824
<4>[ 0.992777] The 1 disk name = env, class name = DISK, disk size = df12a864
<4>[ 0.992787] The 2 disk name = boot, class name = DISK, disk size = df12a8a4
<4>[ 0.992797] The 3 disk name = system, class name = DISK, disk size = df12a8e4
<4>[ 0.992806] The 4 disk name = data, class name = DISK, disk size = df12a924
<4>[ 0.992816] The 5 disk name = misc, class name = DISK, disk size = df12a964
<4>[ 0.992825] The 6 disk name = recovery, class name = DISK, disk size = df12a9a4
<4>[ 0.992834] The 7 disk name = cache, class name = DISK, disk size = df12a9e4
<4>[ 0.992844] The 8 disk name = databk, class name = DISK, disk size = df12aa24
<4>[ 0.992853] The 9 disk name = private, class name = DISK, disk size = df12aa64
<4>[ 0.992863] The 10 disk name = UDISK, class name = DISK, disk size = df12aaa4
<4>[ 0.992876] nand part 2048 start sec is not align
<4>[ 0.992885] Part 0: part_type: 0x0
<4>[ 0.992891] startblock: 0x0, endblock 0x4
<4>[ 0.992898] nand part 2048 start sec is not align
<4>[ 0.992905] nand part 4096 sec count is not align
<4>[ 0.992912] Part 1: part_type: 0x0
<4>[ 0.992918] startblock: 0x4, endblock 0x4
<4>[ 0.992924] nand part 6144 start sec is not align
<4>[ 0.992932] Part 2: part_type: 0x0
<4>[ 0.992938] startblock: 0x4, endblock 0xc
<4>[ 0.992944] nand part 6144 start sec is not align
<4>[ 0.992951] Part 3: part_type: 0x2
<4>[ 0.992958] startblock: 0xc, endblock 0x8c
<4>[ 0.992964] nand part 6144 start sec is not align
<4>[ 0.992971] Part 4: part_type: 0x2
<4>[ 0.992978] startblock: 0x8c, endblock 0x18c
<4>[ 0.992984] nand part 6144 start sec is not align
<4>[ 0.992991] nand part 2048 sec count is not align
<4>[ 0.992998] Part 5: part_type: 0x2
<4>[ 0.993004] startblock: 0x18c, endblock 0x18c
<4>[ 0.993011] Part 6: part_type: 0x2
<4>[ 0.993018] startblock: 0x18d, endblock 0x195
<4>[ 0.993025] Part 7: part_type: 0x2
<4>[ 0.993031] startblock: 0x195, endblock 0x1d5
<4>[ 0.993038] Part 8: part_type: 0x0
<4>[ 0.993044] startblock: 0x1d5, endblock 0x215
<4>[ 0.993051] Part 9: part_type: 0x0
<4>[ 0.993057] startblock: 0x215, endblock 0x219
<4>[ 0.993064] Part 10: part_type: 0x0
<4>[ 0.993071] startblock: 0x219, endblock 0x720
<6>[ 0.994827] nanda:
<6>[ 0.996584] nandb: unknown partition table
<6>[ 0.998162] nandc: unknown partition table
<6>[ 0.999728] nandd: unknown partition table
<6>[ 1.001701] nande: unknown partition table
<6>[ 1.003278] nandf: unknown partition table
<6>[ 1.004712] nandg: unknown partition table
<6>[ 1.006581] nandh: unknown partition table
<6>[ 1.008067] nandi: unknown partition table
<6>[ 1.009541] nandj: unknown partition table
<6>[ 1.010902] nandk:
<6>[ 1.011270] benn: nand probe enter
<4>[ 1.011404] [NAND]nand driver, ok.
<6>[ 1.011765] init: command 'insmod' r=0
<6>[ 1.011857] init: command 'symlink' r=0
<6>[ 1.011895] init: command 'symlink' r=0
<6>[ 1.011928] init: command 'symlink' r=0
<6>[ 1.011955] init: command 'mkdir' r=0
<6>[ 1.012212] init: command 'mount' r=0
<6>[ 1.012334] init: command 'mkdir' r=0
<6>[ 1.012409] init: command 'mkdir' r=0
<6>[ 1.012467] init: command 'mkdir' r=0
<6>[ 1.012516] init: command 'mkdir' r=0
<6>[ 1.012555] init: command 'mkdir' r=0
<6>[ 1.012597] init: command 'mkdir' r=0
<6>[ 1.012653] init: command 'mkdir' r=0
<6>[ 1.012691] init: command 'mkdir' r=0
<6>[ 1.012733] init: command 'mkdir' r=0
<6>[ 1.012827] init: command 'mount' r=0
<6>[ 1.012879] init: command 'mkdir' r=0
<6>[ 1.012953] init: command 'mount' r=0
<6>[ 1.013067] init: command 'write' r=0
<6>[ 1.013145] init: command 'write' r=-2
<6>[ 1.013217] init: command 'write' r=0
<6>[ 1.013268] init: command 'write' r=0
<6>[ 1.013311] init: command 'write' r=0
<6>[ 1.013357] init: command 'write' r=-2
<6>[ 1.013397] init: command 'write' r=0
<6>[ 1.013452] init: command 'write' r=0
<6>[ 1.013498] init: command 'write' r=0
<6>[ 1.013539] init: command 'write' r=0
<6>[ 1.013596] init: command 'write' r=0
<6>[ 1.013641] init: command 'write' r=0
<6>[ 1.013682] init: command 'write' r=0
<6>[ 1.013714] init: command 'mkdir' r=0
<6>[ 1.013790] init: command 'mount' r=-1
<6>[ 1.013830] init: command 'chown' r=0
<6>[ 1.013866] init: command 'chown' r=-2
<6>[ 1.013898] init: command 'chmod' r=-2
<6>[ 1.013982] init: command 'write' r=0
<6>[ 1.014038] init: command 'write' r=0
<6>[ 1.014086] init: command 'write' r=0
<6>[ 1.014117] init: command 'mkdir' r=0
<6>[ 1.014152] init: command 'chown' r=-2
<6>[ 1.014188] init: command 'chmod' r=-2
<6>[ 1.014242] init: command 'write' r=0
<6>[ 1.014290] init: command 'write' r=0
<6>[ 1.014341] init: command 'write' r=0
<6>[ 1.014368] init: command 'mkdir' r=0
<6>[ 1.014405] init: command 'chown' r=-2
<6>[ 1.014437] init: command 'chmod' r=-2
<6>[ 1.014487] init: command 'write' r=0
<6>[ 1.014558] init: command 'write' r=0
<6>[ 1.014609] init: command 'write' r=0
<6>[ 1.014667] init: command 'chmod' r=0
<6>[ 1.014699] init: processing action 0x1970ff0 (fs)
<6>[ 1.022801] EXT4-fs (nandd): barriers disabled
<6>[ 1.024411] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: barrier=0
<6>[ 1.024482] init: command 'mount' r=0
<6>[ 1.024546] init: command 'wait' r=0
<6>[ 1.032535] EXT4-fs (nande): barriers disabled
<7>[ 1.041622] EXT4-fs (nande): ext4_orphan_cleanup: deleting unreferenced inode 57808
<6>[ 1.042727] EXT4-fs (nande): 1 orphan inode deleted
<6>[ 1.042739] EXT4-fs (nande): recovery complete
<6>[ 1.043426] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: barrier=0
<6>[ 1.043497] init: command 'mount' r=0
<6>[ 1.043662] init: command 'setupfs' r=0
<3>[ 1.043684] init: do_umount: /data
<6>[ 1.050138] init: command 'umount' r=0
<6>[ 1.131200] init: command 'exec' r=0
<6>[ 1.201370] EXT4-fs (nande): barriers disabled
<6>[ 1.202559] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: barrier=0,journal_checksum,noauto_da_alloc
<6>[ 1.202925] init: command 'exec' r=0
<6>[ 1.210930] EXT4-fs (nandh): barriers disabled
<6>[ 1.212044] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: barrier=0
<6>[ 1.212107] init: command 'mount' r=0
<6>[ 1.212251] init: command 'setupfs' r=0
<3>[ 1.212270] init: do_umount: /cache
<6>[ 1.220128] init: command 'umount' r=0
<6>[ 1.238434] init: command 'exec' r=0
<6>[ 1.248165] EXT4-fs (nandh): barriers disabled
<6>[ 1.249324] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: barrier=0,journal_checksum,noauto_da_alloc
<6>[ 1.249678] init: command 'exec' r=0
<3>[ 1.250684] init: dont need format /dev/block/nandk
<6>[ 1.250711] init: command 'format_userdata' r=1
<6>[ 1.250756] init: command 'wait' r=0
<6>[ 1.258993] EXT4-fs (nandi): barriers disabled
<6>[ 1.260817] EXT4-fs (nandi): mounted filesystem with ordered data mode. Opts: barrier=0
<6>[ 1.260886] init: command 'mount' r=0
<6>[ 1.261033] init: command 'setupfs' r=0
<3>[ 1.261054] init: do_umount: /databk
<6>[ 1.270133] init: command 'umount' r=0
<6>[ 1.270202] init: command 'rmdir' r=0
<6>[ 1.270233] init: processing action 0x196a628 (post-fs)
<6>[ 1.270358] init: command 'chown' r=0
<6>[ 1.270402] init: command 'chmod' r=0
<6>[ 1.271343] init: command 'chown' r=-2
<6>[ 1.271376] init: command 'chmod' r=-2
<6>[ 1.271456] init: command 'chown' r=0
<6>[ 1.271502] init: command 'chmod' r=0
<6>[ 1.271548] init: command 'chown' r=0
<6>[ 1.271589] init: command 'chmod' r=0
<6>[ 1.271635] init: command 'chown' r=0
<6>[ 1.271674] init: command 'chmod' r=0
<6>[ 1.271779] init: command 'mkdir' r=0
<6>[ 1.271808] init: processing action 0x196a818 (post-fs-data)
<6>[ 1.271869] init: command 'chown' r=0
<6>[ 1.271908] init: command 'chmod' r=0
<6>[ 1.280613] init: command 'mkdir' r=0
<6>[ 1.280671] init: command 'copy' r=-1
<6>[ 1.281530] init: command 'chown' r=-2
<6>[ 1.281561] init: command 'chmod' r=-2
<6>[ 1.281591] init: command 'copy' r=-1
<6>[ 1.281626] init: command 'chown' r=-2
<6>[ 1.281648] init: command 'chmod' r=-2
<6>[ 1.281674] init: command 'write' r=-2
<6>[ 1.288998] init: command 'mkdir' r=0
<6>[ 1.289899] init: command 'mkdir' r=0
<6>[ 1.289975] init: command 'mkdir' r=0
<6>[ 1.290119] init: command 'mkdir' r=0
<6>[ 1.290194] init: command 'mkdir' r=0
<6>[ 1.290262] init: command 'mkdir' r=0
<6>[ 1.290332] init: command 'mkdir' r=0
<6>[ 1.290404] init: command 'mkdir' r=0
<6>[ 1.291220] init: command 'chmod' r=0
<6>[ 1.291269] init: command 'chown' r=0
<6>[ 1.291352] init: command 'mkdir' r=0
<6>[ 1.291424] init: command 'mkdir' r=0
<6>[ 1.291459] init: command 'chown' r=0
<6>[ 1.298110] init: command 'mkdir' r=0
<6>[ 1.305442] init: command 'mkdir' r=0
<6>[ 1.305536] init: command 'mkdir' r=0
<6>[ 1.305647] init: command 'chmod' r=0
<6>[ 1.306467] init: command 'chmod' r=0
<6>[ 1.306532] init: command 'chmod' r=0
<6>[ 1.306584] init: command 'chmod' r=0
<6>[ 1.306627] init: command 'chown' r=0
<6>[ 1.306661] init: command 'chown' r=0
<6>[ 1.306694] init: command 'chown' r=0
<6>[ 1.306727] init: command 'chown' r=0
<6>[ 1.307620] init: command 'mkdir' r=0
<6>[ 1.314483] init: command 'mkdir' r=0
<6>[ 1.321120] init: command 'mkdir' r=0
<6>[ 1.327786] init: command 'mkdir' r=0
<6>[ 1.327875] init: command 'mkdir' r=0
<6>[ 1.327949] init: command 'mkdir' r=0
<6>[ 1.328021] init: command 'mkdir' r=0
<6>[ 1.328908] init: command 'mkdir' r=0
<6>[ 1.328991] init: command 'mkdir' r=0
<6>[ 1.329085] init: command 'mkdir' r=0
<6>[ 1.329120] init: command 'chown' r=0
<6>[ 1.329153] init: command 'chmod' r=0
<6>[ 1.329225] init: command 'mkdir' r=0
<6>[ 1.329295] init: command 'mkdir' r=0
<6>[ 1.329325] init: processing action 0x196f5c8 (post-fs-data)
<6>[ 1.329512] init: command 'chown' r=0
<6>[ 1.329593] init: command 'chmod' r=0
<6>[ 1.329665] init: command 'chown' r=0
<6>[ 1.329719] init: command 'chmod' r=0
<6>[ 1.329735] init: processing action 0x1973c60 (property_service_init)
<6>[ 1.333168] init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'
<3>[ 1.334059] FAT-fs (nandj): bogus number of reserved sectors
<6>[ 1.334073] FAT-fs (nandj): Can't find a valid FAT filesystem
<3>[ 1.340092] init: mount /dev/block/nandj failed!
<3>[ 1.340129] init: open /mnt/private/sn.txt failed
<3>[ 1.340149] init: open /mnt/private/imei.txt failed
<6>[ 1.340195] init: command 'property_service_init' r=0
<6>[ 1.340231] init: processing action 0x1973ca8 (signal_init)
<6>[ 1.340314] init: command 'signal_init' r=0
<6>[ 1.340341] init: processing action 0x1973cf0 (check_startup)
<6>[ 1.340391] init: command 'check_startup' r=0
<6>[ 1.340412] init: processing action 0x196b0c8 (boot)
<6>[ 1.340935] init: command 'ifup' r=0
<6>[ 1.341070] init: command 'hostname' r=0
<6>[ 1.341121] init: command 'domainname' r=0
<6>[ 1.341146] init: command 'setrlimit' r=0
<6>[ 1.341210] init: command 'write' r=0
<6>[ 1.341260] init: command 'write' r=0
<6>[ 1.341399] init: command 'chown' r=0
<6>[ 1.341446] init: command 'chmod' r=0
<6>[ 1.341495] init: command 'chown' r=0
<6>[ 1.341531] init: command 'chmod' r=0
<6>[ 1.341582] init: command 'write' r=0
<6>[ 1.341626] init: command 'write' r=0
<6>[ 1.341663] init: command 'chown' r=-2
<6>[ 1.341696] init: command 'chown' r=-2
<6>[ 1.341725] init: command 'chown' r=-2
<6>[ 1.341753] init: command 'chown' r=-2
<6>[ 1.341782] init: command 'chown' r=-2
<6>[ 1.341833] init: command 'chown' r=0
<6>[ 1.341876] init: command 'chown' r=0
<6>[ 1.341918] init: command 'chown' r=0
<6>[ 1.341975] init: command 'chown' r=0
<6>[ 1.342014] init: command 'chmod' r=0
<6>[ 1.342046] init: command 'chmod' r=0
<6>[ 1.342077] init: command 'chmod' r=0
<6>[ 1.342128] init: command 'chown' r=-2
<6>[ 1.342163] init: command 'chmod' r=-2
<6>[ 1.342200] init: command 'chown' r=-2
<6>[ 1.342234] init: command 'chmod' r=-2
<6>[ 1.342269] init: command 'chown' r=-2
<6>[ 1.342304] init: command 'chmod' r=-2
<6>[ 1.342340] init: command 'chown' r=-2
<6>[ 1.342374] init: command 'chmod' r=-2
<6>[ 1.342410] init: command 'chown' r=-2
<6>[ 1.342445] init: command 'chmod' r=-2
<6>[ 1.342484] init: command 'chown' r=-2
<6>[ 1.342517] init: command 'chmod' r=-2
<6>[ 1.342554] init: command 'chown' r=-2
<6>[ 1.342589] init: command 'chown' r=-2
<6>[ 1.342624] init: command 'chmod' r=-2
<6>[ 1.342676] init: command 'chown' r=0
<6>[ 1.342713] init: command 'chmod' r=0
<6>[ 1.342759] init: command 'chown' r=0
<6>[ 1.342800] init: command 'chmod' r=0
<6>[ 1.342848] init: command 'chown' r=-2
<6>[ 1.342897] init: command 'chown' r=-2
<6>[ 1.342930] init: command 'chown' r=-2
<6>[ 1.342965] init: command 'chown' r=-2
<6>[ 1.342998] init: command 'chown' r=-2
<6>[ 1.343032] init: command 'chown' r=-2
<6>[ 1.343065] init: command 'chown' r=-2
<6>[ 1.343098] init: command 'chown' r=-2
<6>[ 1.343131] init: command 'chown' r=-2
<6>[ 1.343164] init: command 'chown' r=-2
<6>[ 1.343197] init: command 'chown' r=-2
<6>[ 1.343232] init: command 'chown' r=-2
<6>[ 1.343264] init: command 'chown' r=-2
<6>[ 1.343297] init: command 'chown' r=-2
<6>[ 1.343330] init: command 'chown' r=-2
<6>[ 1.343368] init: command 'chown' r=-2
<6>[ 1.343400] init: command 'chown' r=-2
<6>[ 1.343434] init: command 'chown' r=-2
<6>[ 1.343480] init: command 'chown' r=-2
<6>[ 1.343548] init: command 'chown' r=0
<6>[ 1.343591] init: command 'chown' r=0
<6>[ 1.343632] init: command 'chown' r=0
<6>[ 1.343672] init: command 'chown' r=0
<6>[ 1.343715] init: command 'chown' r=0
<6>[ 1.343756] init: command 'chown' r=0
<6>[ 1.343833] init: command 'chown' r=0
<6>[ 1.343897] init: command 'setprop' r=0
<6>[ 1.343942] init: command 'setprop' r=0
<6>[ 1.343984] init: command 'setprop' r=0
<6>[ 1.344025] init: command 'setprop' r=0
<6>[ 1.344066] init: command 'setprop' r=0
<6>[ 1.344108] init: command 'setprop' r=0
<6>[ 1.344151] init: command 'setprop' r=0
<6>[ 1.344177] init: command 'setprop' r=0
<3>[ 1.344210] init: service 'console' requires console
<5>[ 1.344308] init: starting 'servicemanager'
<5>[ 1.344716] init: starting 'vold'
<6>[ 1.344974] init: command 'class_start' r=0
<5>[ 1.345054] init: starting 'netd'
<5>[ 1.345331] init: starting 'debuggerd'
<5>[ 1.345597] init: starting 'ril-daemon'
<5>[ 1.345881] init: starting 'surfaceflinger'
<5>[ 1.346168] init: starting 'zygote'
<5>[ 1.346438] init: starting 'drm'
<5>[ 1.346708] init: starting 'media'
<5>[ 1.346988] init: starting 'dbus'
<5>[ 1.347276] init: starting 'installd'
<3>[ 1.347569] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<5>[ 1.347640] init: starting 'keystore'
<5>[ 1.347929] init: starting 'u3gmonitor'
<6>[ 1.348164] init: command 'class_start' r=0
<6>[ 1.348231] init: processing action 0x196e2f8 (boot)
<6>[ 1.348342] init: command 'chmod' r=-2
<6>[ 1.348386] init: command 'chown' r=-2
<6>[ 1.348429] init: command 'chown' r=-2
<6>[ 1.348463] init: command 'chown' r=-2
<6>[ 1.348497] init: command 'chown' r=-2
<6>[ 1.348531] init: command 'chown' r=-2
<6>[ 1.348565] init: command 'chown' r=-2
<6>[ 1.348600] init: command 'chown' r=-2
<6>[ 1.348633] init: command 'chown' r=-2
<6>[ 1.348666] init: command 'chown' r=-2
<6>[ 1.348697] init: command 'chmod' r=-2
<6>[ 1.348728] init: command 'chmod' r=-2
<6>[ 1.348760] init: command 'chmod' r=-2
<6>[ 1.348792] init: command 'chmod' r=-2
<6>[ 1.348824] init: command 'chmod' r=-2
<6>[ 1.348856] init: command 'chmod' r=-2
<6>[ 1.348890] init: command 'chmod' r=-2
<6>[ 1.348922] init: command 'chmod' r=-2
<6>[ 1.348957] init: command 'chmod' r=-2
<6>[ 1.348991] init: command 'chown' r=-2
<6>[ 1.349023] init: command 'chmod' r=-2
<6>[ 1.349057] init: processing action 0x1971340 (boot)
<6>[ 1.349787] init: Created socket '/dev/socket/rild-debug' with mode '660', user '1001', group '1000'
<6>[ 1.349880] init: Created socket '/dev/socket/rild' with mode '660', user '0', group '1001'
<6>[ 1.352513] init: Created socket '/dev/socket/zygote' with mode '660', user '0', group '1000'
<6>[ 1.352951] init: Created socket '/dev/socket/mdns' with mode '660', user '0', group '1000'
<6>[ 1.353028] init: Created socket '/dev/socket/dnsproxyd' with mode '660', user '0', group '3003'
<6>[ 1.355114] init: Created socket '/dev/socket/netd' with mode '660', user '0', group '1000'
<6>[ 1.356531] init: Created socket '/dev/socket/dbus' with mode '660', user '1002', group '1002'
<6>[ 1.356925] init: Created socket '/dev/socket/vold' with mode '660', user '0', group '1009'
<6>[ 1.358798] init: Created socket '/dev/socket/keystore' with mode '666', user '0', group '0'
<6>[ 1.360707] init: Created socket '/dev/socket/installd' with mode '600', user '1000', group '1000'
<4>[ 1.397299] ===================================gsl_ts_init=====================================
<4>[ 1.397319] ctp_is_used =0
<6>[ 1.397326] ctp_fetch_sysconfig_para.
<6>[ 1.397352] ctp_fetch_sysconfig_para: after: ctp_twi_addr is 0x40, dirty_addr_buf: 0x40. dirty_addr_buf[1]: 0xfffe
<6>[ 1.397364] ctp_fetch_sysconfig_para: ctp_twi_id is 1.
<6>[ 1.397523] ctp_fetch_sysconfig_para: screen_max_x = 800.
<6>[ 1.397534] ctp_fetch_sysconfig_para: screen_max_y = 480.
<6>[ 1.397544] ctp_fetch_sysconfig_para: revert_x_flag = 0.
<6>[ 1.397554] ctp_fetch_sysconfig_para: revert_y_flag = 0.
<6>[ 1.397563] ctp_fetch_sysconfig_para: exchange_x_y_flag = 0.
<4>[ 1.397573] gsl_ts_init: after fetch_sysconfig_para: normal_i2c: 0x40. normal_i2c[1]: 0xfffe
<4>[ 1.397622] script parser fetch err.
<4>[ 1.397630] ctp_init_platform_resource: tp_reset request gpio fail!
<6>[ 1.397783] ctp_detect: Detected chip gslX680 at adapter 1, address 0x40
<4>[ 1.397968] GSLX680 Enter gsl_ts_probe
<4>[ 1.397984] ==kzalloc success=
<4>[ 1.397992] [GSLX680] Enter gsl_ts_init_ts
<6>[ 1.398325] input: gslX680 as /devices/platform/sun5i-i2c.1/i2c-1/1-0040/input/input2
<6>[ 1.398566] ctp_set_irq_mode: config gpio to int mode.
<6>[ 1.398594] ctp_set_irq_mode, 326: gpio_int_info, port = 7, port_num = 11.
<6>[ 1.398602] INTERRUPT CONFIG
<6>[ 1.400418] I read reg 0xf0 is 0
<6>[ 1.420501] I write reg 0xf0 0x12
<6>[ 1.440638] I read reg 0xf0 is 0x12
<4>[ 1.490211] gandy-------init_chip start
<4>[ 1.550091] =============gsl_load_fw start==============
<4>[ 1.890442] portpm set vbus on
<4>[ 1.890466] portpm send uevent USB_PORT_STATE=POWER ON
<4>[ 1.890558] is_on = 1, hcd0_set_vbus_cnt = 0
<4>[ 2.080149]
<4>[ 2.080163]
<4>[ 2.080166] insmod_device_driver
<4>[ 2.080170]
<4>[ 2.080188] [sw_udc]: sw_usb_device_enable start
<4>[ 2.080198] [sw_udc]: usb_vbase = 0xf1c13000
<4>[ 2.080207] [sw_udc]: sram_vbase = 0xf1c00000
<4>[ 2.080241] [sw_udc]: open_usb_clock
<4>[ 2.201253] [sw_udc]: usbd_stop_work
<4>[ 2.201316] [sw_udc]: sw_usb_device_enable end
<4>[ 2.845266] =============gsl_load_fw end==============
<4>[ 3.150166] gandy-------init_chip end
<4>[ 3.191545] [GSLX680] End gsl_ts_probe
<6>[ 3.191783] init: command 'insmod' r=0
<6>[ 3.191908] init: waitpid returned pid 85, status = 00000000
<5>[ 3.191926] init: process 'surfaceflinger', pid 85 exited
<5>[ 3.191947] init: process 'surfaceflinger' killing any children in process group
<5>[ 3.191984] init: service 'zygote' is being killed
<5>[ 3.192087] init: starting 'zygote'
<6>[ 3.200491] init: Created socket '/dev/socket/zygote' with mode '660', user '0', group '1000'
<4>[ 3.209376] ===========================pixcir_ts_init=====================
<4>[ 3.209397] ========ctp_is_used = 1===========
<6>[ 3.209812] init: command 'insmod' r=-1
<6>[ 3.209954] init: waitpid returned pid 86, status = 00000009
<3>[ 3.209971] init: untracked pid 86 exited
<4>[ 3.228398] ===========================goodix_ts_init=====================
<4>[ 3.228419] ctp_is_used =1
<6>[ 3.228609] init: command 'insmod' r=0
<3>[ 3.260368] =========Novatek_TouchDriver============
<4>[ 3.260396] ctp_is_used =1
<6>[ 3.260557] init: command 'insmod' r=0
<6>[ 3.276145] ===========================ft5x_ts_init=====================
<4>[ 3.276163] ctp_is_used =1
<6>[ 3.276314] init: command 'insmod' r=0
<4>[ 3.303342] UMP: UMP device driver loaded
<6>[ 3.303579] init: command 'insmod' r=0
<4>[ 3.411619] Mali: enable mali clock
<4>[ 3.421504] Mali: Mali device driver loaded
<6>[ 3.421980] init: command 'insmod' r=0
<4>[ 3.434771] init_cedar_libmodule,21
<4>[ 3.434787] [cedar dev:liba]: install start!!!
<4>[ 3.437831] [cedar dev]: install end!!!
<6>[ 3.437993] init: command 'insmod' r=0
<6>[ 3.454027] init: command 'insmod' r=0
<6>[ 3.463441] init: command 'insmod' r=0
<6>[ 3.478624] init: command 'insmod' r=0
<6>[ 3.494953] init: command 'insmod' r=0
<6>[ 3.512149] init: command 'insmod' r=0
<6>[ 3.544389] [CSI]Welcome to CSI driver
<6>[ 3.544407] [CSI]csi_init
<6>[ 3.560593] [CSI]registered sub device,input_num = 0
<6>[ 3.560894] [CSI]V4L2 device registered as video0
<6>[ 3.561131] init: command 'insmod' r=0
<6>[ 3.561265] init: command 'insmod' r=-1
<6>[ 3.579418] usbcore: registered new interface driver asix
<6>[ 3.579596] init: command 'insmod' r=0
<6>[ 3.593610] usbcore: registered new interface driver qf9700
<6>[ 3.593768] init: command 'insmod' r=0
<6>[ 3.606977] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
<6>[ 3.607131] init: command 'insmod' r=0
<6>[ 3.621743] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
<6>[ 3.622045] usbcore: registered new interface driver rtl8150
<6>[ 3.622203] init: command 'insmod' r=0
<4>[ 3.632185] ======mma7660_init=========.
<4>[ 3.632203] ========gsensor_fetch_sysconfig_para===================
<4>[ 3.632237] gsensor_fetch_sysconfig_para: after: gsensor_twi_addr is 0x4c, dirty_addr_buf: 0x4c. dirty_addr_buf[1]: 0xfffe
<4>[ 3.632252] gsensor_fetch_sysconfig_para: twi_id is 1.
<4>[ 3.632269] mma7660_init: after fetch_sysconfig_para: normal_i2c: 0x4c. normal_i2c[1]: 0xfffe
<6>[ 3.632568] gsensor_detect: Detected chip mma7660 at adapter 1, address 0x4c
<6>[ 3.632829] mma7660 probe
<6>[ 3.795095] mma7660 1-004c: build time Apr 23 2013 12:00:08
<6>[ 3.795798] input: mma7660 as /devices/virtual/input/input3
<6>[ 3.797266] add mma7660 i2c driver
<6>[ 3.797426] init: command 'insmod' r=0
<4>[ 3.811478] ======stk831x_init=========.
<4>[ 3.811496] ========gsensor_fetch_sysconfig_para===================
<3>[ 3.811517] gsensor_fetch_sysconfig_para: script_parser_fetch err.ret = -4.
<5>[ 3.811526] =========script_parser_fetch_err============
<4>[ 3.811533] stk831x_init: err.
<6>[ 3.812091] init: command 'insmod' r=-1
<4>[ 3.825529] dmard06: init
<4>[ 3.825548] ========gsensor_fetch_sysconfig_para===================
<4>[ 3.825579] gsensor_fetch_sysconfig_para: after: gsensor_twi_addr is 0x1c, dirty_addr_buf: 0x1c. dirty_addr_buf[1]: 0xfffe
<4>[ 3.825594] gsensor_fetch_sysconfig_para: twi_id is 1.
<4>[ 3.825618] err: gpio count < =0 ,gpio_count is: 0
<4>[ 3.825627] dmard06_init: after fetch_sysconfig_para: normal_i2c: 0x1c. normal_i2c[1]: 0xfffe
<6>[ 3.825964] gsensor_detect: Detected chip dmard06 at adapter 1, address 0x1c
<4>[ 3.826295] ==probe func==
<6>[ 3.826873] i2c Read SW_RESET = 0
<6>[ 3.827269] i2c Read WHO_AM_I = 0
<4>[ 3.827277] dmard06 gsensor I2C err = 0!
<4>[ 3.827313] dmard06 probe failed
<4>[ 3.827337] dmard06: probe of 1-001c failed with error -1
<6>[ 3.827541] init: command 'insmod' r=0
<6>[ 3.827682] init: command 'insmod' r=-1
<6>[ 3.827725] init: command 'insmod' r=-1
<6>[ 3.827762] init: command 'insmod' r=-1
<6>[ 3.827865] init: command 'chmod' r=-2
<6>[ 3.828054] init: command 'mkdir' r=0
<6>[ 3.829655] init: command 'exec' r=0
<6>[ 3.829830] init: command 'chmod' r=0
<6>[ 3.829964] init: command 'chmod' r=-2
<6>[ 3.829993] init: processing action 0x1973d38 (queue_property_triggers)
<6>[ 3.830210] init: command 'queue_property_triggers' r=0
<6>[ 3.830386] init: processing action 0x196c160 (property:ro.debuggable=1)
<3>[ 3.830410] init: service 'console' requires console
<6>[ 3.830421] init: command 'start' r=0
<6>[ 3.830440] init: processing action 0x196ffc0 (property:persist.sys.usb.config=*)
<6>[ 3.830514] init: command 'setprop' r=0
<6>[ 3.830534] init: processing action 0x1973800 (property:ro.factorytest=0)
<5>[ 3.830575] init: starting 'sitronix'
<6>[ 3.830939] init: command 'start' r=0
<6>[ 3.830992] init: processing action 0x19738a0 (property:ro.factorytest=0)
<6>[ 3.831028] init: command 'start' r=0
<5>[ 3.831216] init: starting 'surfaceflinger'
<6>[ 3.831495] init: command 'start' r=0
<6>[ 3.831582] init: command 'start' r=0
<6>[ 3.831598] init: command 'start' r=0
<6>[ 3.831611] init: processing action 0x19726e0 (property:sys.usb.config=mass_storage,adb)
<3>[ 3.831778] android_usb: already disabled
<6>[ 3.831810] init: command 'write' r=0
<6>[ 3.832036] init: command 'write' r=0
<6>[ 3.832131] init: command 'write' r=0
<3>[ 3.832154] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
<6>[ 3.832235] init: command 'write' r=0
<4>[ 3.832303] ep_matches, wrn: endpoint already claimed, ep(0xc08d13c0, 0xdfbf3e00, ep1-bulk)
<6>[ 3.832365] adb_bind_config
<4>[ 3.832377] ep_matches, wrn: endpoint already claimed, ep(0xc08d13c0, 0xdfbf3e00, ep1-bulk)
<4>[ 3.832387] ep_matches, wrn: endpoint already claimed, ep(0xc08d1400, 0xdfbf3e00, ep2-bulk)
<4>[ 3.832399] ep_matches, wrn: endpoint already claimed, ep(0xc08d13c0, 0xdfbf3e00, ep1-bulk)
<4>[ 3.832409] ep_matches, wrn: endpoint already claimed, ep(0xc08d1400, 0xdfbf3e00, ep2-bulk)
<4>[ 3.832422] ep_matches, wrn: endpoint already claimed, ep(0xc08d1440, 0xdf08ca00, ep3-bulk)
<4>[ 3.832433] [sw_udc]: alloc request: ep(0xc08d1480, ep4-bulk, 512), req(0xded54d80)
<4>[ 3.832446] [sw_udc]: alloc request: ep(0xc08d1440, ep3-bulk, 512), req(0xded54dc0)
<4>[ 3.832459] [sw_udc]: alloc request: ep(0xc08d1440, ep3-bulk, 512), req(0xded54e00)
<4>[ 3.832471] [sw_udc]: alloc request: ep(0xc08d1440, ep3-bulk, 512), req(0xded54e40)
<4>[ 3.832484] [sw_udc]: alloc request: ep(0xc08d1440, ep3-bulk, 512), req(0xded54e80)
<4>[ 3.832498] [sw_udc]: sw_udc_pullup, is_on = 1
<4>[ 3.832507] [sw_udc]: CONFIG_USB_GADGET_DUALSPEED
<4>[ 3.832518] [sw_udc]: usbd_start_work
<6>[ 3.832540] init: command 'write' r=0
<5>[ 3.832587] init: starting 'adbd'
<6>[ 3.833030] init: command 'start' r=0
<3>[ 3.833123] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
<6>[ 3.833168] init: command 'setprop' r=0
<6>[ 3.842697] adb_open
<6>[ 3.860243] init: waitpid returned pid 240, status = 00000200
<5>[ 3.860272] init: process 'sitronix', pid 240 exited
<4>[ 3.887974] [sw_udc]: IRQ: suspend
<4>[ 3.888002] [sw_udc]: ERR: usb speed is unkown
<4>[ 4.106946] [sw_udc]: IRQ: reset
<4>[ 4.106972] [sw_udc]: irq: reset happen, throw away all urb
<5>[ 4.132860] init: starting 'bootanim'
<4>[ 4.256991] [sw_udc]:
<4>[ 4.257015] +++++++++++++++++++++++++++++++++++++
<4>[ 4.257023] [sw_udc]: usb enter high speed.
<4>[ 4.257030] [sw_udc]:
<4>[ 4.257035] +++++++++++++++++++++++++++++++++++++
<6>[ 4.257219] android_work: sent uevent USB_STATE=CONNECTED
<4>[ 4.261780] [sw_udc]: IRQ: reset
<4>[ 4.261796] [sw_udc]: irq: reset happen, throw away all urb
<4>[ 4.397408] [sw_udc]: Set address 1
<6>[ 4.482484] android_usb gadget: high speed config #1: android
<4>[ 4.482520] [sw_udc]: ep enable: ep3(0xc08d1440, ep3-bulk, 128, 512)
<4>[ 4.482542] [sw_udc]: ep enable: ep4(0xc08d1480, ep4-bulk, 0, 512)
<4>[ 4.482602] [sw_udc]: ep enable: ep1(0xc08d13c0, ep1-bulk, 128, 512)
<4>[ 4.482619] [sw_udc]: ep enable: ep2(0xc08d1400, ep2-bulk, 0, 512)
<4>[ 4.482633] [sw_udc]: alloc request: ep(0xc08d13c0, ep1-bulk, 512), req(0xdc64f0c0)
<4>[ 4.482657] [sw_udc]: alloc request: ep(0xc08d1400, ep2-bulk, 512), req(0xdc64f100)
<4>[ 4.482671] [sw_udc]: alloc request: ep(0xc08d13c0, ep1-bulk, 512), req(0xdc64f140)
<4>[ 4.482682] [sw_udc]: alloc request: ep(0xc08d1400, ep2-bulk, 512), req(0xdc64f180)
<6>[ 4.482817] android_work: sent uevent USB_STATE=CONFIGURED
<4>[ 4.527713] nuke: ep num is 0
<4>[ 7.200113] set usbcur 0 mA
<4>[ 7.200403] set usbvol 4000 mV
<6>[ 11.575065] warning: `zygote' uses 32-bit capabilities (legacy support in use)
<6>[ 15.928464] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
<6>[ 16.260429] EXT4-fs (dm-0): re-mounted. Opts: (null)
<6>[ 16.282698] EXT4-fs (dm-0): re-mounted. Opts: (null)
<6>[ 17.472614] acc_open
<6>[ 17.472655] acc_release
<4>[ 17.604101] sw_usb_enable_hcd: usbc_num = 1
<4>[ 17.604144] [sw-ehci1]: sw_usb_enable_ehci
<4>[ 17.604165] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc09a0c2c
<4>[ 17.604200] [sw-ehci1]: open clock
<4>[ 17.645120] usb_passby en=1,passly=0
<4>[ 17.645142] hci_port_configure en=1,config_cnt=0
<4>[ 17.645154] [sw-ehci1]: sw_set_vbus cnt 1
<4>[ 17.645162] [sw-ehci1]: Set USB Power ON
<6>[ 17.653926] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 17.653989] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
<6>[ 17.654120] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
<6>[ 17.670114] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
<4>[ 17.670139] ehci_irq: port change detect
<6>[ 17.671613] hub 2-0:1.0: USB hub found
<6>[ 17.671663] hub 2-0:1.0: 1 port detected
<4>[ 17.672270] [sw-ohci1]: sw_usb_enable_ohci
<4>[ 17.672287] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc09a0d84
<4>[ 17.672301] [sw-ohci1]: open clock
<4>[ 17.700298] hci_port_configure en=1,config_cnt=1
<4>[ 17.700330] usb_passby en=1,passly=1
<4>[ 17.700346] [sw-ohci1]: sw_set_vbus cnt 2
<6>[ 17.700371] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>[ 17.700448] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
<6>[ 17.700553] sw-ohci sw-ohci.1: irq 40, io mem 0xf1c14400
<6>[ 17.768456] hub 3-0:1.0: USB hub found
<6>[ 17.768503] hub 3-0:1.0: 1 port detected
<4>[ 17.775417] rtl8192cu driver version=v4.0.0_5534.20121020
<4>[ 17.775435] build time: Apr 23 2013 12:02:13
<4>[ 17.775444] ##########rtw_suspend_lock_init ###########
<6>[ 17.779510] usbcore: registered new interface driver rtl8192cu
<6>[ 17.990350] usb 2-1: new high speed USB device number 2 using sw-ehci
<6>[ 20.892945] init: waitpid returned pid 401, status = 00000000
<3>[ 20.892978] init: untracked pid 401 exited
<4>[ 22.209639] +rtw_drv_halt
<4>[ 22.209676] ##########rtw_suspend_lock_uninit###########
<6>[ 22.209693] usbcore: deregistering interface driver rtl8192cu
<4>[ 22.211780] sw_usb_disable_hcd: usbc_num = 1
<4>[ 22.211810] [sw-ehci1]: sw_usb_disable_ehci
<4>[ 22.211829] [sw-ehci1]: remove, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc09a0c2c
<6>[ 22.211848] sw-ehci sw-ehci.1: remove, state 1
<6>[ 22.211937] usb usb2: USB disconnect, device number 1
<6>[ 22.211950] usb 2-1: USB disconnect, device number 2
<6>[ 22.220864] sw-ehci sw-ehci.1: USB bus 2 deregistered
<4>[ 22.221018] [sw-ehci1]: sw_set_vbus cnt 1
<4>[ 22.221027] hci_port_configure en=0,config_cnt=2
<4>[ 22.221037] usb_passby en=0,passly=2
<4>[ 22.221043] [sw-ehci1]: close clock
<4>[ 22.221085] [sw-ohci1]: sw_usb_disable_ohci
<4>[ 22.221098] [sw-ohci1]: remove, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc09a0d84
<6>[ 22.221110] sw-ohci sw-ohci.1: remove, state 1
<6>[ 22.221139] usb usb3: USB disconnect, device number 1
<6>[ 22.224101] sw-ohci sw-ohci.1: USB bus 3 deregistered
<4>[ 22.224131] [sw-ohci1]: sw_set_vbus cnt 0
<4>[ 22.224139] [sw-ohci1]: Set USB Power OFF
<4>[ 22.224881] usb_passby en=0,passly=1
<4>[ 22.224893] hci_port_configure en=0,config_cnt=1
<4>[ 22.224905] [sw-ohci1]: close clock
<4>[ 22.224956] -rtw_drv_halt
<4>[ 27.281314] RTL871X: sw_usb_enable_hcd: usbc_num = 1
<4>[ 27.282254] [sw-ehci1]: sw_usb_enable_ehci
<4>[ 27.282281] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc09a0c2c
<4>[ 27.282303] [sw-ehci1]: open clock
<4>[ 27.412405] usb_passby en=1,passly=0
<4>[ 27.412439] hci_port_configure en=1,config_cnt=0
<4>[ 27.412457] [sw-ehci1]: sw_set_vbus cnt 1
<4>[ 27.412465] [sw-ehci1]: Set USB Power ON
<6>[ 27.447000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 27.447112] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
<6>[ 27.447322] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
<6>[ 27.460148] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
<4>[ 27.460176] ehci_irq: port change detect
<6>[ 27.466049] hub 2-0:1.0: USB hub found
<6>[ 27.466086] hub 2-0:1.0: 1 port detected
<4>[ 27.466406] [sw-ohci1]: sw_usb_enable_ohci
<4>[ 27.466422] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc09a0d84
<4>[ 27.466436] [sw-ohci1]: open clock
<4>[ 27.560376] hci_port_configure en=1,config_cnt=1
<4>[ 27.560408] usb_passby en=1,passly=1
<4>[ 27.560425] [sw-ohci1]: sw_set_vbus cnt 2
<6>[ 27.560447] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>[ 27.560525] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
<6>[ 27.560644] sw-ohci sw-ohci.1: irq 40, io mem 0xf1c14400
<6>[ 27.626814] hub 3-0:1.0: USB hub found
<6>[ 27.626857] hub 3-0:1.0: 1 port detected
<4>[ 27.628786] RTL871X: rtl8188eu driver version=v4.1.4_6773.20130222
<4>[ 27.639500] RTL871X: build time: Apr 23 2013 12:02:11
<6>[ 27.646524] usbcore: registered new interface driver rtl8188eu
<6>[ 27.780145] usb 2-1: new high speed USB device number 2 using sw-ehci
<4>[ 27.935367] RTL871X:
<4>[ 27.935377] usb_endpoint_descriptor(0):
<4>[ 27.935390] RTL871X: bLength=7
<4>[ 27.935396] RTL871X: bDescriptorType=5
<4>[ 27.935402] RTL871X: bEndpointAddress=81
<4>[ 27.935408] RTL871X: wMaxPacketSize=512
<4>[ 27.935414] RTL871X: bInterval=0
<4>[ 27.935420] RTL871X: RT_usb_endpoint_is_bulk_in = 1
<4>[ 27.935427] RTL871X:
<4>[ 27.935430] usb_endpoint_descriptor(1):
<4>[ 27.935438] RTL871X: bLength=7
<4>[ 27.935443] RTL871X: bDescriptorType=5
<4>[ 27.935449] RTL871X: bEndpointAddress=2
<4>[ 27.935455] RTL871X: wMaxPacketSize=512
<4>[ 27.935461] RTL871X: bInterval=0
<4>[ 27.935467] RTL871X: RT_usb_endpoint_is_bulk_out = 2
<4>[ 27.935474] RTL871X:
<4>[ 27.935477] usb_endpoint_descriptor(2):
<4>[ 27.935484] RTL871X: bLength=7
<4>[ 27.935489] RTL871X: bDescriptorType=5
<4>[ 27.935495] RTL871X: bEndpointAddress=3
<4>[ 27.935501] RTL871X: wMaxPacketSize=512
<4>[ 27.935507] RTL871X: bInterval=0
<4>[ 27.935513] RTL871X: RT_usb_endpoint_is_bulk_out = 3
<4>[ 27.935521] RTL871X: nr_endpoint=3, in_num=1, out_num=2
<4>[ 27.935526]
<4>[ 27.935531] RTL871X: USB_SPEED_HIGH
<4>[ 27.935593] RTL871X: CHIP TYPE: RTL8188E
<4>[ 27.935606] RTL871X: rtw_handle_dualmac(): pbuddy_padapter == NULL, Set pbuddy_padapter
<4>[ 27.935637] RTL871X: register rtw_netdev_ops to netdev_ops
<4>[ 27.935657] RTL871X: rtw_wdev_alloc(padapter=e0810000)
<4>[ 27.937717] RTL871X: Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
<4>[ 27.937739] RTL871X: RF_Type is 3!!
<4>[ 27.937751] RTL871X: _ConfigNormalChipOutEP_8188E OutEpQueueSel(0x05), OutEpNumber(2)
<4>[ 27.937873] RTL871X: EEPROM type is E-FUSE
<4>[ 27.937885] RTL871X: ====> _ReadAdapterInfo8188EU
<4>[ 27.938012] RTL871X: Boot from EFUSE, Autoload OK !
<4>[ 27.941752] bFWReady == _FALSE call reset 8051...
<4>[ 27.942119] RTL871X: =====> _8051Reset88E(): 8051 reset success .
<4>[ 27.969426] RTL871X: efuse_read_phymap_from_txpktbuf bcnhead:0
<4>[ 27.970510] RTL871X: efuse_read_phymap_from_txpktbuf len:225, lenbak:225, aaa:225, aaabak:225
<4>[ 27.990540] RTL871X: efuse_read_phymap_from_txpktbuf read count:223
<4>[ 27.991091] RTL871X: EEPROM ID=0x8129
<4>[ 27.991102] RTL871X: VID = 0x0BDA, PID = 0x8179
<4>[ 27.991110] RTL871X: Customer ID: 0x00, SubCustomer ID: 0xCD
<4>[ 27.991124] RTL871X: Hal_ReadPowerSavingMode88E...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(1)
<4>[ 27.991142] RTL871X: ### PS params=> power_mgnt(0),usbss_enable(0) ###
<4>[ 27.991156] RTL871X: ======= Path 0, Channel 0 =======
<4>[ 27.991164] RTL871X: Index24G_CCK_Base[0][0] = 0x2d
<4>[ 27.991202] RTL871X: Index24G_BW40_Base[0][0] = 0x2d
<4>[ 27.991211] RTL871X: ======= Path 0, Channel 1 =======
<4>[ 27.991220] RTL871X: Index24G_CCK_Base[0][1] = 0x2d
<4>[ 27.991228] RTL871X: Index24G_BW40_Base[0][1] = 0x2d
<4>[ 27.991235] RTL871X: ======= Path 0, Channel 2 =======
<4>[ 27.991243] RTL871X: Index24G_CCK_Base[0][2] = 0x2d
<4>[ 27.991256] RTL871X: Index24G_BW40_Base[0][2] = 0x2d
<4>[ 27.991263] RTL871X: ======= Path 0, Channel 3 =======
<4>[ 27.991271] RTL871X: Index24G_CCK_Base[0][3] = 0x2d
<4>[ 27.991279] RTL871X: Index24G_BW40_Base[0][3] = 0x2d
<4>[ 27.991286] RTL871X: ======= Path 0, Channel 4 =======
<4>[ 27.991294] RTL871X: Index24G_CCK_Base[0][4] = 0x2d
<4>[ 27.991317] RTL871X: Index24G_BW40_Base[0][4] = 0x2d
<4>[ 27.991324] RTL871X: ======= Path 0, Channel 5 =======
<4>[ 27.991332] RTL871X: Index24G_CCK_Base[0][5] = 0x2d
<4>[ 27.991340] RTL871X: Index24G_BW40_Base[0][5] = 0x2d
<4>[ 27.991347] RTL871X: ======= Path 0, Channel 6 =======
<4>[ 27.991355] RTL871X: Index24G_CCK_Base[0][6] = 0x2d
<4>[ 27.991362] RTL871X: Index24G_BW40_Base[0][6] = 0x2d
<4>[ 27.991369] RTL871X: ======= Path 0, Channel 7 =======
<4>[ 27.991377] RTL871X: Index24G_CCK_Base[0][7] = 0x2d
<4>[ 27.991385] RTL871X: Index24G_BW40_Base[0][7] = 0x2d
<4>[ 27.991392] RTL871X: ======= Path 0, Channel 8 =======
<4>[ 27.991400] RTL871X: Index24G_CCK_Base[0][8] = 0x2d
<4>[ 27.991408] RTL871X: Index24G_BW40_Base[0][8] = 0x2d
<4>[ 27.991415] RTL871X: ======= Path 0, Channel 9 =======
<4>[ 27.991423] RTL871X: Index24G_CCK_Base[0][9] = 0x2d
<4>[ 27.991430] RTL871X: Index24G_BW40_Base[0][9] = 0x2d
<4>[ 27.991438] RTL871X: ======= Path 0, Channel 10 =======
<4>[ 27.991446] RTL871X: Index24G_CCK_Base[0][10] = 0x2d
<4>[ 27.991453] RTL871X: Index24G_BW40_Base[0][10] = 0x2d
<4>[ 27.991461] RTL871X: ======= Path 0, Channel 11 =======
<4>[ 27.991468] RTL871X: Index24G_CCK_Base[0][11] = 0x2d
<4>[ 27.991476] RTL871X: Index24G_BW40_Base[0][11] = 0x2d
<4>[ 27.991483] RTL871X: ======= Path 0, Channel 12 =======
<4>[ 27.991491] RTL871X: Index24G_CCK_Base[0][12] = 0x2d
<4>[ 27.991500] RTL871X: Index24G_BW40_Base[0][12] = 0x2d
<4>[ 27.991507] RTL871X: ======= Path 0, Channel 13 =======
<4>[ 27.991515] RTL871X: Index24G_CCK_Base[0][13] = 0x2d
<4>[ 27.991523] RTL871X: Index24G_BW40_Base[0][13] = 0x2d
<4>[ 27.991530] RTL871X: ======= Path 0, Channel 14 =======
<4>[ 27.991538] RTL871X: Index24G_CCK_Base[0][14] = 0x2d
<4>[ 27.991546] RTL871X: Index24G_BW40_Base[0][14] = 0x2d
<4>[ 27.991553] RTL871X: ======= TxCount 0 =======
<4>[ 27.991560] RTL871X: CCK_24G_Diff[0][0]= 0
<4>[ 27.991567] RTL871X: OFDM_24G_Diff[0][0]= 2
<4>[ 27.991574] RTL871X: BW20_24G_Diff[0][0]= 0
<4>[ 27.991581] RTL871X: BW40_24G_Diff[0][0]= 0
<4>[ 27.991587] RTL871X: ======= TxCount 1 =======
<4>[ 27.991595] RTL871X: CCK_24G_Diff[0][1]= -2
<4>[ 27.991601] RTL871X: OFDM_24G_Diff[0][1]= -2
<4>[ 27.991608] RTL871X: BW20_24G_Diff[0][1]= -2
<4>[ 27.991615] RTL871X: BW40_24G_Diff[0][1]= -2
<4>[ 27.991622] RTL871X: ======= TxCount 2 =======
<4>[ 27.991629] RTL871X: CCK_24G_Diff[0][2]= -2
<4>[ 27.991636] RTL871X: OFDM_24G_Diff[0][2]= -2
<4>[ 27.991643] RTL871X: BW20_24G_Diff[0][2]= -2
<4>[ 27.991650] RTL871X: BW40_24G_Diff[0][2]= -2
<4>[ 27.991656] RTL871X: ======= TxCount 3 =======
<4>[ 27.991663] RTL871X: CCK_24G_Diff[0][3]= -2
<4>[ 27.991670] RTL871X: OFDM_24G_Diff[0][3]= -2
<4>[ 27.991677] RTL871X: BW20_24G_Diff[0][3]= -2
<4>[ 27.991684] RTL871X: BW40_24G_Diff[0][3]= -2
<4>[ 27.991691] RTL871X: EEPROMRegulatory = 0x0
<4>[ 27.991699] RTL871X: mlmepriv.ChannelPlan = 0x20
<4>[ 27.991708] RTL871X: CrystalCap: 0x20
<4>[ 27.991714] RTL871X: EEPROM Customer ID: 0x 0
<4>[ 27.991722] RTL871X: EEPROM : AntDivCfg = 0, TRxAntDivType = 3
<4>[ 27.991730] RTL871X: Board Type: 0x 0
<4>[ 27.991736] RTL871X: ThermalMeter = 0x1a
<4>[ 27.991743] RTL871X: <==== _ReadAdapterInfo8188EU in 60 ms
<4>[ 27.993070] RTL871X: rtw_register_early_suspend
<4>[ 27.993162] RTL871X:
<4>[ 27.993166] padapter->pwrctrlpriv.bSupportRemoteWakeup~~~~~~
<4>[ 27.993177] RTL871X:
<4>[ 27.993180] padapter->pwrctrlpriv.bSupportRemoteWakeup~~~[1]~~~
<4>[ 27.993200] RTL871X: rtw_macaddr_cfg MAC Address = 00:e0:4c:8a:3f:fd
<4>[ 27.993212] RTL871X: MAC Address from pnetdev->dev_addr= 00:e0:4c:8a:3f:fd
<4>[ 28.008930] RTL871X: bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
<4>[ 28.009040] RTL871X: register rtw_netdev_ops to netdev_ops
<4>[ 28.009058] RTL871X: register rtw_netdev_if2_ops to netdev_ops
<4>[ 28.009144] RTL871X: rtw_wdev_alloc(padapter=e0861000)
<4>[ 28.010977] RTL871X: Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
<4>[ 28.010996] RTL871X: RF_Type is 3!!
<4>[ 28.011007] RTL871X: _ConfigNormalChipOutEP_8188E OutEpQueueSel(0x05), OutEpNumber(2)
<4>[ 28.012521] RTL871X: rtw_register_early_suspend
<4>[ 28.012579] RTL871X: MAC Address (if2) = 02:e0:4c:8a:3f:fd
<5>[ 28.339862] init: starting 'wpa_supplicant'
<6>[ 28.366105] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010'
<6>[ 28.449398] init: processing action 0x196dbe8 (property:sys.boot_completed=1)
<5>[ 28.449484] init: starting 'preinstall'
<6>[ 28.449857] init: command 'start' r=0
<5>[ 28.450871] init: starting 'systemc'
<6>[ 28.451265] init: command 'start' r=0
<3>[ 28.553395] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
<6>[ 28.557548] init: waitpid returned pid 628, status = 00000000
<5>[ 28.557577] init: process 'preinstall', pid 628 exited
<6>[ 28.573988] init: waitpid returned pid 255, status = 00000000
<5>[ 28.574017] init: process 'bootanim', pid 255 exited
<4>[ 28.616787] RTL871X: cfg80211_rtw_change_iface(wlan0) call netdev_open
<4>[ 28.616817] RTL871X: +871x_drv - drv_open, bup=0
<4>[ 28.621245] RTL871X: rtl8188e_FirmwareDownload: fw_ver=11 fw_subver=1 sig=0x88e1
<4>[ 28.678146] RTL871X: _FWFreeToGo: Checksum report OK! REG_MCUFWDL:0x00030004
<4>[ 28.678754] RTL871X: =====> _8051Reset88E(): 8051 reset success .
<4>[ 28.681737] RTL871X: _FWFreeToGo: Polling FW ready success!! REG_MCUFWDL:0x000300c6
<4>[ 28.853190] ==> rtl8188e_iol_efuse_patch
<4>[ 28.936503] RTL871X: pDM_Odm TxPowerTrackControl = 1
<4>[ 29.760658] RTL871X: rtl8188eu_hal_init in 1150ms
<4>[ 29.760696] RTL871X: MAC Address = 00:e0:4c:8a:3f:fd
<4>[ 29.781618] RTL871X: rtw_cfg80211_init_wiphy:rf_type=3
<4>[ 29.781644] RTL871X: +871x_drv - if2_open, bup=0
<4>[ 29.781741] RTL871X: rtw_hal_inirp_init HalFunc.inirp_init is NULL!!!
<4>[ 29.781838] RTL871X: rtw_cfg80211_init_wiphy:rf_type=3
<4>[ 29.781850] RTL871X: -871x_drv - if2_open, bup=1
<4>[ 29.781857] RTL871X: -871x_drv - drv_open, bup=1
<4>[ 29.781873] RTL871X: cfg80211_rtw_change_iface(wlan0) old_iftype=6, new_iftype=2
<4>[ 29.782417] RTL871X: +871x_drv - drv_open, bup=1
<4>[ 29.782432] RTL871X: -871x_drv - drv_open, bup=1
<4>[ 29.782536] RTL871X: cfg80211_rtw_set_power_mgmt(wlan0) enabled:0, timeout:-1
<6>[ 29.782712] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>[ 29.783693] RTL871X: cfg80211_rtw_flush_pmksa(wlan0)
<4>[ 29.793791] RTL871X: hw_var_set_opmode()-3362 mode = 2
<4>[ 29.827759] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 29.827931] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 29.828004] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 29.861551] RTL871X: rtw_android_priv_cmd: Android private cmd "WFD-SET-TCPPORT = 554" on wlan0
<4>[ 29.864298] RTL871X: Unknown PRIVATE command WFD-SET-TCPPORT = 554 - ignored
<4>[ 29.864408] RTL871X: rtw_android_priv_cmd: Android private cmd "WFD-SET-MAXTPUT = 300" on wlan0
<4>[ 29.864425] RTL871X: Unknown PRIVATE command WFD-SET-MAXTPUT = 300 - ignored
<4>[ 29.864452] RTL871X: rtw_android_priv_cmd: Android private cmd "WFD-SET-DEVTYPE = 1" on wlan0
<4>[ 29.864466] RTL871X: Unknown PRIVATE command WFD-SET-DEVTYPE = 1 - ignored
<4>[ 29.891404] RTL871X: no packet in tx packet buffer (0)
<4>[ 29.947306] RTL871X: rtw_android_priv_cmd: Android private cmd "BTCOEXSCAN-STOP" on wlan0
<4>[ 29.949141] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-STOP" on wlan0
<4>[ 29.953948] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-ADD 3" on wlan0
<4>[ 29.954243] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-START" on wlan0
<4>[ 29.954522] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-STOP" on wlan0
<4>[ 29.955143] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-REMOVE 2" on wlan0
<4>[ 29.955708] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-START" on wlan0
<4>[ 29.956043] RTL871X: cfg80211_rtw_set_power_mgmt(wlan0) enabled:1, timeout:-1
<4>[ 29.971383] RTL871X: rtw_android_priv_cmd: Android private cmd "SETBAND 0" on wlan0
<4>[ 29.974498] RTL871X: rtw_android_priv_cmd: Android private cmd "SCAN-ACTIVE" on wlan0
<4>[ 29.978458] RTL871X: rtw_android_priv_cmd: Android private cmd "SCAN-PASSIVE" on wlan0
<6>[ 30.048844] init: waitpid returned pid 622, status = 00000000
<3>[ 30.048872] init: untracked pid 622 exited
<4>[ 30.829201] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 31.215654] RTL871X: survey done event(1e)
<4>[ 31.217254] RTL871X: =>cfg80211_rtw_connect(wlan0)
<4>[ 31.217277] RTL871X: privacy=1, key= (null), key_len=0, key_idx=0
<4>[ 31.217294] RTL871X: ssid=hans741nd, len=9
<4>[ 31.217303] RTL871X: bssid=e8:94:f6:6f:24:5e
<4>[ 31.217312] RTL871X: matched by bssid
<4>[ 31.217322] RTL871X: rtw_cfg80211_set_wpa_version, wpa_version=2
<4>[ 31.217330] RTL871X: rtw_cfg80211_set_auth_type, nl80211_auth_type=0
<4>[ 31.217339] RTL871X: cfg80211_rtw_connect, ie_len=70
<4>[ 31.217348] RTL871X: set wpa_ie(length:70):
<4>[ 31.217358] RTL871X: 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
<4>[ 31.217369] RTL871X: 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
<4>[ 31.217379] RTL871X: 0x00 0x0f 0xac 0x02 0x00 0x00 0xdd 0x2e
<4>[ 31.217389] RTL871X: 0x50 0x6f 0x9a 0x09 0x02 0x02 0x00 0x23
<4>[ 31.217399] RTL871X: 0x00 0x0d 0x22 0x00 0x00 0xe0 0x4c 0x8a
<4>[ 31.217408] RTL871X: 0x3f 0xfd 0x01 0x88 0x00 0x0a 0x00 0x50
<4>[ 31.217418] RTL871X: 0xf2 0x04 0x00 0x05 0x00 0x10 0x11 0x00
<4>[ 31.217428] RTL871X: 0x0d 0x6e 0x75 0x63 0x6c 0x65 0x61 0x72
<4>[ 31.217439] RTL871X: 0x5f 0x6b 0x66 0x30 0x32 0x36 0x00 0x00
<4>[ 31.217453] RTL871X: got wpa2_ie, wpa2_ielen:20
<4>[ 31.217468] RTL871X: rtw_cfg80211_set_cipher, ucast=1, cipher=0xfac04
<4>[ 31.217479] RTL871X: rtw_cfg80211_set_cipher, ucast=0, cipher=0xfac04
<4>[ 31.217488] RTL871X: rtw_cfg80211_set_key_mgt, key_mgt=0xfac02
<4>[ 31.217514] RTL871X: set ssid [hans741nd] fw_state=0x00000008
<4>[ 31.217522] RTL871X: Set SSID under fw_state=0x00000008
<4>[ 31.217541] RTL871X: [by_bssid:0][assoc_ssid:hans741nd][to_roaming:0] new candidate: hans741nd(e8:94:f6:6f:24:5e) rssi:-56
<4>[ 31.217558] RTL871X: rtw_select_and_join_from_scanned_queue: candidate: hans741nd(e8:94:f6:6f:24:5e, ch:5)
<4>[ 31.217594] RTL871X: Capture EPIGRAM_OUI
<4>[ 31.217601] RTL871X: Capture EPIGRAM_OUI
<4>[ 31.217607] RTL871X: link to Artheros AP
<4>[ 31.217615] RTL871X: rtw_joinbss_cmd: smart_ps=2
<4>[ 31.217630] RTL871X: set ssid:dot11AuthAlgrthm=2, dot11PrivacyAlgrthm=4, dot118021XGrpPrivacy=4
<4>[ 31.217640] RTL871X: <=cfg80211_rtw_connect, ret 0
<4>[ 31.217775] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 31.217853] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 31.217937] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 31.222611] RTL871X: set ch/bw before connected
<4>[ 31.229661] RTL871X: update_mgnt_tx_rate(): rate = 2
<4>[ 31.294255] RTL871X: Capture EPIGRAM_OUI
<4>[ 31.294269] RTL871X: Capture EPIGRAM_OUI
<4>[ 31.294277] RTL871X: link to Artheros AP
<4>[ 31.294289] RTL871X: issue_deauth to e8:94:f6:6f:24:5e
<4>[ 31.294337] RTL871X: start auth
<4>[ 31.294353] RTL871X: issue_auth
<4>[ 31.590073] RTL871X: link_timer_hdl: auth timeout and try again
<4>[ 31.590117] RTL871X: issue_auth
<4>[ 31.890079] RTL871X: link_timer_hdl: auth timeout and try again
<4>[ 31.890127] RTL871X: issue_auth
<4>[ 32.190094] RTL871X: link_timer_hdl: auth timeout and try again
<4>[ 32.190144] RTL871X: issue_auth
<4>[ 32.490035] RTL871X: link_timer_hdl: auth timeout and try again
<4>[ 32.490073] RTL871X: issue_auth
<4>[ 32.504812] RTL871X: OnAuthClient
<4>[ 32.504824] RTL871X: auth success, start assoc
<4>[ 32.504849] RTL871X: network.SupportedRates[0]=82
<4>[ 32.504857] RTL871X: network.SupportedRates[1]=84
<4>[ 32.504864] RTL871X: network.SupportedRates[2]=8B
<4>[ 32.504872] RTL871X: network.SupportedRates[3]=96
<4>[ 32.504879] RTL871X: network.SupportedRates[4]=0C
<4>[ 32.504886] RTL871X: network.SupportedRates[5]=12
<4>[ 32.504893] RTL871X: network.SupportedRates[6]=18
<4>[ 32.504900] RTL871X: network.SupportedRates[7]=24
<4>[ 32.504907] RTL871X: network.SupportedRates[8]=30
<4>[ 32.504914] RTL871X: network.SupportedRates[9]=48
<4>[ 32.504921] RTL871X: network.SupportedRates[10]=60
<4>[ 32.504928] RTL871X: network.SupportedRates[11]=6C
<4>[ 32.504937] RTL871X: bssrate_len = 12
<4>[ 32.800031] RTL871X: link_timer_hdl: assoc timeout and try again
<4>[ 32.800067] RTL871X: network.SupportedRates[0]=82
<4>[ 32.800075] RTL871X: network.SupportedRates[1]=84
<4>[ 32.800083] RTL871X: network.SupportedRates[2]=8B
<4>[ 32.800091] RTL871X: network.SupportedRates[3]=96
<4>[ 32.800111] RTL871X: network.SupportedRates[4]=0C
<4>[ 32.800120] RTL871X: network.SupportedRates[5]=12
<4>[ 32.800127] RTL871X: network.SupportedRates[6]=18
<4>[ 32.800134] RTL871X: network.SupportedRates[7]=24
<4>[ 32.800141] RTL871X: network.SupportedRates[8]=30
<4>[ 32.800149] RTL871X: network.SupportedRates[9]=48
<4>[ 32.800156] RTL871X: network.SupportedRates[10]=60
<4>[ 32.800163] RTL871X: network.SupportedRates[11]=6C
<4>[ 32.800172] RTL871X: bssrate_len = 12
<4>[ 33.100086] RTL871X: link_timer_hdl: assoc timeout and try again
<4>[ 33.100136] RTL871X: network.SupportedRates[0]=82
<4>[ 33.100147] RTL871X: network.SupportedRates[1]=84
<4>[ 33.100155] RTL871X: network.SupportedRates[2]=8B
<4>[ 33.100162] RTL871X: network.SupportedRates[3]=96
<4>[ 33.100169] RTL871X: network.SupportedRates[4]=0C
<4>[ 33.100177] RTL871X: network.SupportedRates[5]=12
<4>[ 33.100184] RTL871X: network.SupportedRates[6]=18
<4>[ 33.100191] RTL871X: network.SupportedRates[7]=24
<4>[ 33.100199] RTL871X: network.SupportedRates[8]=30
<4>[ 33.100206] RTL871X: network.SupportedRates[9]=48
<4>[ 33.100213] RTL871X: network.SupportedRates[10]=60
<4>[ 33.100220] RTL871X: network.SupportedRates[11]=6C
<4>[ 33.100229] RTL871X: bssrate_len = 12
<4>[ 33.400032] RTL871X: link_timer_hdl: assoc timeout and try again
<4>[ 33.400082] RTL871X: network.SupportedRates[0]=82
<4>[ 33.400091] RTL871X: network.SupportedRates[1]=84
<4>[ 33.400098] RTL871X: network.SupportedRates[2]=8B
<4>[ 33.400105] RTL871X: network.SupportedRates[3]=96
<4>[ 33.400114] RTL871X: network.SupportedRates[4]=0C
<4>[ 33.400121] RTL871X: network.SupportedRates[5]=12
<4>[ 33.400128] RTL871X: network.SupportedRates[6]=18
<4>[ 33.400135] RTL871X: network.SupportedRates[7]=24
<4>[ 33.400142] RTL871X: network.SupportedRates[8]=30
<4>[ 33.400149] RTL871X: network.SupportedRates[9]=48
<4>[ 33.400156] RTL871X: network.SupportedRates[10]=60
<4>[ 33.400163] RTL871X: network.SupportedRates[11]=6C
<4>[ 33.400172] RTL871X: bssrate_len = 12
<4>[ 33.700036] RTL871X: link_timer_hdl: assoc timeout and try again
<4>[ 33.700073] RTL871X: network.SupportedRates[0]=82
<4>[ 33.700082] RTL871X: network.SupportedRates[1]=84
<4>[ 33.700089] RTL871X: network.SupportedRates[2]=8B
<4>[ 33.700096] RTL871X: network.SupportedRates[3]=96
<4>[ 33.700104] RTL871X: network.SupportedRates[4]=0C
<4>[ 33.700111] RTL871X: network.SupportedRates[5]=12
<4>[ 33.700118] RTL871X: network.SupportedRates[6]=18
<4>[ 33.700125] RTL871X: network.SupportedRates[7]=24
<4>[ 33.700131] RTL871X: network.SupportedRates[8]=30
<4>[ 33.700139] RTL871X: network.SupportedRates[9]=48
<4>[ 33.700146] RTL871X: network.SupportedRates[10]=60
<4>[ 33.700153] RTL871X: network.SupportedRates[11]=6C
<4>[ 33.700161] RTL871X: bssrate_len = 12
<4>[ 33.714216] RTL871X: OnAssocRsp
<4>[ 33.714245] RTL871X: report_join_res(3)
<4>[ 33.714257] RTL871X: rtw_joinbss_update_network
<4>[ 33.714271] RTL871X: +rtw_update_ht_cap()
<4>[ 33.714293] RTL871X: rtw_joinbss_update_stainfo
<4>[ 33.714301] RTL871X: ### Set STA_(0) info
<4>[ 33.714319] RTL871X: rtw_cfg80211_indicate_connect(padapter=e0810000)
<4>[ 33.714341] RTL871X: pwdev->sme_state(b)=1
<4>[ 33.714361] RTL871X: pwdev->sme_state(a)=1
<4>[ 33.714369] RTL871X: assoc success
<6>[ 33.714644] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>[ 33.714926] RTL871X: HW_VAR_BASIC_RATE: BrateCfg(0x15f)
<4>[ 33.715604] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 33.715701] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 33.715767] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 33.720664] RTL871X: OnAssocRsp
<4>[ 33.728964] RTL871X: WMM(0): 0, a42b
<4>[ 33.729177] RTL871X: WMM(1): 0, a44f
<4>[ 33.729295] RTL871X: WMM(2): 0, 5e4322
<4>[ 33.729418] RTL871X: WMM(3): 0, 2f3222
<4>[ 33.729428] RTL871X: wmm_para_seq(0): 0
<4>[ 33.729436] RTL871X: wmm_para_seq(1): 1
<4>[ 33.729442] RTL871X: wmm_para_seq(2): 2
<4>[ 33.729449] RTL871X: wmm_para_seq(3): 3
<4>[ 33.729459] RTL871X: HTOnAssocRsp
<4>[ 33.736304] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4>[ 33.736315] ==> rssi_level:0, rate_bitmap:0x000ff015
<4>[ 33.736340] RTL871X: ### MacID(0),Set Max Tx RPT MID(1)
<4>[ 33.736576] RTL871X: ### rtl8188e_set_FwMediaStatus_cmd: MStatus=1 MACID=0
<4>[ 33.738300] RTL871X: rtl8188e_set_FwJoinBssReport_cmd mstatus(1)
<4>[ 33.739415] RTL871X: SetFwRsvdPagePkt
<4>[ 33.739485] RTL871X: SetFwRsvdPagePkt: Set RSVD page location to Fw
<4>[ 33.740676] RTL871X: rtl8188e_set_FwJoinBssReport_cmd: 1 Download RSVD success! DLBcnCount:1, poll:1
<4>[ 33.741410] RTL871X: Set RSVD page location to Fw.
<4>[ 33.741539] RTL871X: =>mlmeext_joinbss_event_callback
<4>[ 33.815814] RTL871X: Drop duplicate management frame with seq_num = 2.
<4>[ 33.820201] RTL871X: Drop duplicate management frame with seq_num = 2.
<4>[ 33.835823] RTL871X: issue_probereq_ex(wlan0) to e8:94:f6:6f:24:5e, ch:5, 3/3 in 50 ms
<4>[ 33.901562] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4>[ 33.901568] ==> rssi_level:2, rate_bitmap:0x000ff000
<4>[ 37.789385] RTL871X: Group handshake still in progress !!!
<4>[ 39.780612] RTL871X: Group handshake still in progress !!!
<4>[ 41.780626] RTL871X: Group handshake still in progress !!!
<4>[ 43.717074] RTL871X: cfg80211_rtw_disconnect(wlan0)
<4>[ 43.780511] RTL871X: Group handshake still in progress !!!
<4>[ 44.054516] RTL871X: update_mgnt_tx_rate(): rate = 2
<4>[ 44.054537] RTL871X: HW_VAR_BASIC_RATE: BrateCfg(0x15f)
<4>[ 44.059876] RTL871X: cfg80211_rtw_disconnect...call rtw_indicate_disconnect
<4>[ 44.059904] RTL871X: rtw_cfg80211_indicate_disconnect(padapter=e0810000)
<4>[ 44.059953] RTL871X: ### Clean STA_(0) info
<4>[ 44.059994] RTL871X: cfg80211_rtw_del_key(wlan0) key_index=0
<4>[ 44.060004] RTL871X: cfg80211_rtw_del_key(wlan0) key_index=1
<4>[ 44.060049] RTL871X: cfg80211_rtw_del_key(wlan0) key_index=2
<4>[ 44.060058] RTL871X: cfg80211_rtw_del_key(wlan0) key_index=3
<4>[ 44.060066] RTL871X: cfg80211_rtw_del_key(wlan0) key_index=4
<4>[ 44.060074] RTL871X: cfg80211_rtw_del_key(wlan0) key_index=5
<4>[ 44.060473] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 44.060570] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 44.060640] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 44.060705] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 44.060824] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 44.061239] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 44.061306] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 44.061369] RTL871X: cfg80211_rtw_change_station(wlan0)
<6>[ 44.061769] cfg80211: Calling CRDA for country: RU
<4>[ 44.061916] RTL871X: rtl8188e_set_FwJoinBssReport_cmd mstatus(0)
<7>[ 44.100039] wlan0: no IPv6 routers present
<4>[ 45.061693] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 45.063260] RTL871X: no packet in tx packet buffer (0)
<4>[ 46.062995] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 46.390157] RTL871X: survey done event(14)
<4>[ 46.396736] RTL871X: =>cfg80211_rtw_connect(wlan0)
<4>[ 46.396767] RTL871X: privacy=1, key= (null), key_len=0, key_idx=0
<4>[ 46.396786] RTL871X: ssid=hans741nd, len=9
<4>[ 46.396795] RTL871X: bssid=e8:94:f6:6f:24:5e
<4>[ 46.396804] RTL871X: matched by bssid
<4>[ 46.396815] RTL871X: rtw_cfg80211_set_wpa_version, wpa_version=2
<4>[ 46.396824] RTL871X: rtw_cfg80211_set_auth_type, nl80211_auth_type=0
<4>[ 46.396833] RTL871X: cfg80211_rtw_connect, ie_len=70
<4>[ 46.396842] RTL871X: set wpa_ie(length:70):
<4>[ 46.396852] RTL871X: 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
<4>[ 46.396861] RTL871X: 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
<4>[ 46.396871] RTL871X: 0x00 0x0f 0xac 0x02 0x00 0x00 0xdd 0x2e
<4>[ 46.396884] RTL871X: 0x50 0x6f 0x9a 0x09 0x02 0x02 0x00 0x23
<4>[ 46.396894] RTL871X: 0x00 0x0d 0x22 0x00 0x00 0xe0 0x4c 0x8a
<4>[ 46.396903] RTL871X: 0x3f 0xfd 0x01 0x88 0x00 0x0a 0x00 0x50
<4>[ 46.396913] RTL871X: 0xf2 0x04 0x00 0x05 0x00 0x10 0x11 0x00
<4>[ 46.396923] RTL871X: 0x0d 0x6e 0x75 0x63 0x6c 0x65 0x61 0x72
<4>[ 46.396933] RTL871X: 0x5f 0x6b 0x66 0x30 0x32 0x36 0x00 0x00
<4>[ 46.396950] RTL871X: got wpa2_ie, wpa2_ielen:20
<4>[ 46.396966] RTL871X: rtw_cfg80211_set_cipher, ucast=1, cipher=0xfac04
<4>[ 46.396977] RTL871X: rtw_cfg80211_set_cipher, ucast=0, cipher=0xfac04
<4>[ 46.396986] RTL871X: rtw_cfg80211_set_key_mgt, key_mgt=0xfac02
<4>[ 46.397010] RTL871X: set ssid [hans741nd] fw_state=0x00000008
<4>[ 46.397021] RTL871X: Set SSID under fw_state=0x00000008
<4>[ 46.397040] RTL871X: [by_bssid:0][assoc_ssid:hans741nd][to_roaming:0] new candidate: hans741nd(e8:94:f6:6f:24:5e) rssi:-55
<4>[ 46.397057] RTL871X: rtw_select_and_join_from_scanned_queue: candidate: hans741nd(e8:94:f6:6f:24:5e, ch:5)
<4>[ 46.397095] RTL871X: Capture EPIGRAM_OUI
<4>[ 46.397102] RTL871X: Capture EPIGRAM_OUI
<4>[ 46.397109] RTL871X: link to Artheros AP
<4>[ 46.397117] RTL871X: rtw_joinbss_cmd: smart_ps=2
<4>[ 46.397132] RTL871X: set ssid:dot11AuthAlgrthm=2, dot11PrivacyAlgrthm=4, dot118021XGrpPrivacy=4
<4>[ 46.397142] RTL871X: <=cfg80211_rtw_connect, ret 0
<4>[ 46.397290] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 46.397371] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 46.397436] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 46.399953] RTL871X: set ch/bw before connected
<4>[ 46.406675] RTL871X: update_mgnt_tx_rate(): rate = 2
<4>[ 46.448029] RTL871X: Capture EPIGRAM_OUI
<4>[ 46.448053] RTL871X: Capture EPIGRAM_OUI
<4>[ 46.448062] RTL871X: link to Artheros AP
<4>[ 46.448077] RTL871X: issue_deauth to e8:94:f6:6f:24:5e
<4>[ 46.448130] RTL871X: start auth
<4>[ 46.448146] RTL871X: issue_auth
<4>[ 46.459328] RTL871X: OnAuthClient
<4>[ 46.459383] RTL871X: auth success, start assoc
<4>[ 46.459447] RTL871X: network.SupportedRates[0]=82
<4>[ 46.459457] RTL871X: network.SupportedRates[1]=84
<4>[ 46.459464] RTL871X: network.SupportedRates[2]=8B
<4>[ 46.459473] RTL871X: network.SupportedRates[3]=96
<4>[ 46.459481] RTL871X: network.SupportedRates[4]=0C
<4>[ 46.459488] RTL871X: network.SupportedRates[5]=12
<4>[ 46.459499] RTL871X: network.SupportedRates[6]=18
<4>[ 46.459507] RTL871X: network.SupportedRates[7]=24
<4>[ 46.459514] RTL871X: network.SupportedRates[8]=30
<4>[ 46.459521] RTL871X: network.SupportedRates[9]=48
<4>[ 46.459528] RTL871X: network.SupportedRates[10]=60
<4>[ 46.459536] RTL871X: network.SupportedRates[11]=6C
<4>[ 46.459546] RTL871X: bssrate_len = 12
<4>[ 46.466358] RTL871X: OnAssocRsp
<4>[ 46.466406] RTL871X: report_join_res(3)
<4>[ 46.466418] RTL871X: rtw_joinbss_update_network
<4>[ 46.466433] RTL871X: +rtw_update_ht_cap()
<4>[ 46.466456] RTL871X: rtw_joinbss_update_stainfo
<4>[ 46.466465] RTL871X: ### Set STA_(0) info
<4>[ 46.466484] RTL871X: rtw_cfg80211_indicate_connect(padapter=e0810000)
<4>[ 46.466494] RTL871X: pwdev->sme_state(b)=1
<4>[ 46.466522] RTL871X: pwdev->sme_state(a)=1
<4>[ 46.466530] RTL871X: assoc success
<4>[ 46.466688] RTL871X: HW_VAR_BASIC_RATE: BrateCfg(0x15f)
<4>[ 46.467446] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 46.467549] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 46.467615] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 46.487392] RTL871X: WMM(0): 0, a42b
<4>[ 46.487546] RTL871X: WMM(1): 0, a44f
<4>[ 46.487644] RTL871X: WMM(2): 0, 5e4322
<4>[ 46.487701] RTL871X: send eapol packet
<4>[ 46.487826] RTL871X: WMM(3): 0, 2f3222
<4>[ 46.487836] RTL871X: wmm_para_seq(0): 0
<4>[ 46.487843] RTL871X: wmm_para_seq(1): 1
<4>[ 46.487849] RTL871X: wmm_para_seq(2): 2
<4>[ 46.487856] RTL871X: wmm_para_seq(3): 3
<4>[ 46.487892] RTL871X: HTOnAssocRsp
<4>[ 46.488671] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4>[ 46.488679] ==> rssi_level:0, rate_bitmap:0x000ff015
<4>[ 46.488699] RTL871X: ### MacID(0),Set Max Tx RPT MID(1)
<4>[ 46.488906] RTL871X: ### rtl8188e_set_FwMediaStatus_cmd: MStatus=1 MACID=0
<4>[ 46.491064] RTL871X: rtl8188e_set_FwJoinBssReport_cmd mstatus(1)
<4>[ 46.492655] RTL871X: SetFwRsvdPagePkt
<4>[ 46.492732] RTL871X: SetFwRsvdPagePkt: Set RSVD page location to Fw
<4>[ 46.493131] RTL871X: send eapol packet
<4>[ 46.493490] RTL871X: cfg80211_rtw_add_key(wlan0) adding key for e8:94:f6:6f:24:5e
<4>[ 46.493595] RTL871X: cipher=0xfac04
<4>[ 46.493603] RTL871X: key_len=0x10
<4>[ 46.493609] RTL871X: seq_len=0x6
<4>[ 46.493615] RTL871X: key_index=0
<4>[ 46.493620] RTL871X: pairwise=1
<4>[ 46.493795] RTL871X: rtw_cfg80211_set_encryption
<4>[ 46.493809] RTL871X: rtw_cfg80211_set_encryption, : param->u.crypt.set_tx ==1
<4>[ 46.493818] RTL871X: ~~~~set sta key:unicastkey
<4>[ 46.493832] RTL871X: rtw_cfg80211_set_encryption, ret=0
<4>[ 46.494041] RTL871X: cfg80211_rtw_set_default_key(wlan0) key_index=0, unicast=1, multicast=0.
<4>[ 46.494281] RTL871X: rtl8188e_set_FwJoinBssReport_cmd: 1 Download RSVD success! DLBcnCount:1, poll:1
<4>[ 46.498235] RTL871X: cfg80211_rtw_add_key(wlan0) adding key for (null)
<4>[ 46.498294] RTL871X: Set RSVD page location to Fw.
<4>[ 46.498453] RTL871X: =>mlmeext_joinbss_event_callback
<4>[ 46.498488] RTL871X: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
<4>[ 46.498591] RTL871X: cipher=0xfac04
<4>[ 46.498599] RTL871X: key_len=0x10
<4>[ 46.498606] RTL871X: seq_len=0x6
<4>[ 46.498611] RTL871X: key_index=1
<4>[ 46.498617] RTL871X: pairwise=0
<4>[ 46.498627] RTL871X: rtw_cfg80211_set_encryption
<4>[ 46.498638] RTL871X: ~~~~set sta key:groupkey
<4>[ 46.498648] RTL871X: ==> rtw_set_key algorithm(4),keyid(1),key_mask(2)
<4>[ 46.498662] RTL871X: rtw_cfg80211_set_encryption, ret=0
<4>[ 46.515151] RTL871X: set group key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
<4>[ 46.526337] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 46.559776] RTL871X: rtw_android_priv_cmd: Android private cmd "BTCOEXMODE 1" on wlan0
<4>[ 46.562350] RTL871X: cfg80211_rtw_set_power_mgmt(wlan0) enabled:0, timeout:-1
<5>[ 46.571290] init: starting 'dhcpcd_wlan0'
<4>[ 47.785072] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4>[ 47.785082] ==> rssi_level:2, rate_bitmap:0x000ff000
<4>[ 50.110189] RTL871X: OnAction_back
<4>[ 50.110213] RTL871X: OnAction_back, action=0
<4>[ 50.110225] RTL871X: issue_action_BA, category=3, action=1, status=0
<4>[ 50.379976] RTL871X: cfg80211_rtw_set_power_mgmt(wlan0) enabled:1, timeout:-1
<4>[ 50.380875] RTL871X: rtw_android_priv_cmd: Android private cmd "BTCOEXMODE 2" on wlan0
<4>[ 55.897459] PHY_PageRead : too much ecc err,bank 0 block 19f,page 2
<6>[ 63.965167] init: waitpid returned pid 1096, status = 00000000
<3>[ 63.965197] init: untracked pid 1096 exited
<6>[ 68.538298] init: waitpid returned pid 1143, status = 00000000
<3>[ 68.538325] init: untracked pid 1143 exited
<4>[ 117.025191] PHY_PageRead : too much ecc err,bank 0 block 19f,page 2
u0_a54@android:/ #
u0_a54@android:/ # dmeesg | grep nand
sh: grep: not found
sh: dmeesg: not found
127|u0_a54@android:/ # dmesg
<6>[ 0.000000] Initializing cgroup subsys cpuset
<5>[ 0.000000] Linux version 3.0.8+ (weidi@brn-weidi) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-50) ) #36 PREEMPT Tue Apr 23 12:02:30 CST 2013
<4>[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387f
<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: sun5i
<6>[ 0.000000] Total Detected Memory: 512MB with 2 banks
<6>[ 0.000000] Memory Reserved(in bytes):
<6>[ 0.000000] LCD: 0x48000000, 0x01000000
<6>[ 0.000000] SYS: 0x43000000, 0x00010000
<6>[ 0.000000] VE : 0x44000000, 0x04000000
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[ 0.000000] On node 0 totalpages: 114688
<7>[ 0.000000] free_area_init_node: node 0, pgdat c08e7910, node_mem_map c0aab000
<7>[ 0.000000] Normal zone: 1024 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 113664 pages, LIFO batch:31
<7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[ 0.000000] pcpu-alloc: [0] 0
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113664
<5>[ 0.000000] Kernel command line: console=ttyS0,115200 rw init=/init loglevel=5
<6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] Memory: 144MB 304MB = 448MB total
<5>[ 0.000000] Memory: 361296k/361296k available, 97456k reserved, 0K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
<5>[ 0.000000] vmalloc : 0xe0800000 - 0xf0000000 ( 248 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .init : 0xc0008000 - 0xc0032000 ( 168 kB)
<5>[ 0.000000] .text : 0xc0032000 - 0xc07f54e8 (7950 kB)
<5>[ 0.000000] .data : 0xc07f6000 - 0xc08ee9c8 ( 995 kB)
<5>[ 0.000000] .bss : 0xc08ee9ec - 0xc0aaafc0 (1778 kB)
<6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
<6>[ 0.000000] NR_IRQS:96 nr_irqs:96 96
<6>[ 0.000000] timer0: Periodic Mode
<4>[ 0.000000] sw_timer_init,line:372
<6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<4>[ 0.000000] aw_clksrc_init, line:339
<6>[ 0.000000] Console: colour dummy device 80x30
<3>[ 0.000000] ram_console: buffer (null), invalid size 0, datasize 4294967284
<6>[ 0.000113] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
<6>[ 0.040020] pid_max: default: 32768 minimum: 301
<6>[ 0.040135] Mount-cache hash table entries: 512
<6>[ 0.040441] Initializing cgroup subsys cpuacct
<6>[ 0.040460] Initializing cgroup subsys devices
<6>[ 0.040470] Initializing cgroup subsys freezer
<6>[ 0.040480] Initializing cgroup subsys blkio
<6>[ 0.040550] CPU: Testing write buffer coherency: ok
<6>[ 0.040749] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
<6>[ 0.041253] devtmpfs: initialized
<6>[ 0.042460] print_constraints: dummy:
<3>[ 0.042502] script_parser_fetch err.
<3>[ 0.042509] script_parser_fetch err.
<3>[ 0.042515] script_parser_fetch err.
<6>[ 0.042627] NET: Registered protocol family 16
<6>[ 0.043150] hw-breakpoint: debug architecture 0x4 unsupported.
<4>[ 0.043580] try to parse apb frequency from script faild!
<4>[ 0.043669] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
<6>[ 0.043729] Initialize DMAC OK
<6>[ 0.047904] bio: create slab <bio-0> at 0
<5>[ 0.048461] SCSI subsystem initialized
<6>[ 0.048668] usbcore: registered new interface driver usbfs
<6>[ 0.048733] usbcore: registered new interface driver hub
<6>[ 0.048869] usbcore: registered new device driver usb
<6>[ 0.049271] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[ 0.049905] cfg80211: Calling CRDA to update world regulatory domain
<4>[ 0.049992] Init eGon pin module V2.0
<6>[ 0.050000] Switching to clocksource aw 64bits couter
<5>[ 0.050000] FS-Cache: Loaded
<6>[ 0.050000] CacheFiles: Loaded
<6>[ 0.050000] Switched to NOHz mode on CPU #0
<4>[ 0.050000] [usb_manager]: CONFIG_USB_SW_SUN5I_USB0_OTG
<4>[ 0.050000] [sw_hcd0]: usb host driver initialize........
<4>[ 0.050000] [sw_hcd0]: open_usb_clock
<4>[ 0.065330] [sw_hcd0]: host_init_state = 0
<4>[ 0.065339] [sw_hcd0]: platform is usb host
<4>[ 0.065405] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
<6>[ 0.065428] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
<6>[ 0.065444] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
<6>[ 0.065937] hub 1-0:1.0: USB hub found
<6>[ 0.065964] hub 1-0:1.0: 1 port detected
<4>[ 0.065990] wrn: hcd is not enable, need not start hcd
<4>[ 0.066174] [sw_hcd0]: sw_usb_host0_disable start
<4>[ 0.066186] -------sw_hcd0_soft_disconnect---------
<4>[ 0.066197] is_on = 0, hcd0_set_vbus_cnt = -1
<4>[ 0.066204] wrn: hcd is not enable, need not stop hcd
<4>[ 0.066236] [sw_hcd0]: close_usb_clock
<4>[ 0.066272] [sw_hcd0]: sw_usb_host0_disable end
<4>[ 0.066309] [sw_udc]: udc_init: version 20080411
<6>[ 0.066645] NET: Registered protocol family 2
<6>[ 0.066760] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.067023] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[ 0.067247] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.067379] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 0.067389] TCP reno registered
<6>[ 0.067399] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.067416] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.067560] NET: Registered protocol family 1
<6>[ 0.067874] RPC: Registered named UNIX socket transport module.
<6>[ 0.067886] RPC: Registered udp transport module.
<6>[ 0.067894] RPC: Registered tcp transport module.
<6>[ 0.067901] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[ 0.068078] Trying to unpack rootfs image as initramfs...
<6>[ 0.114219] Freeing initrd memory: 516K
<6>[ 0.114302] PMU: registered new PMU device of type 0
<4>[ 0.114363] [pm]aw_pm_init!
<6>[ 0.114376] standby_mode = 0.
<3>[ 0.114382] aw_pm_init: not support super standby.
<6>[ 0.114591] audit: initializing netlink socket (disabled)
<5>[ 0.114637] type=2000 audit(0.109:1): initialized
<6>[ 0.124265] ashmem: initialized
<5>[ 0.130000] VFS: Disk quotas dquot_6.5.2
<4>[ 0.130291] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>[ 0.133106] NTFS driver 2.1.30 [Flags: R/W].
<6>[ 0.133409] fuse init (API version 7.16)
<6>[ 0.133955] msgmni has been set to 706
<6>[ 0.138238] alg: No test for stdrng (krng)
<6>[ 0.138481] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
<6>[ 0.138498] io scheduler noop registered
<6>[ 0.138506] io scheduler deadline registered
<6>[ 0.138584] io scheduler cfq registered (default)
<6>[ 0.139231] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[ 0.141125] brd: module loaded
<6>[ 0.142864] loop: module loaded
<6>[ 0.142967] sunxi debug register driver init
<4>[ 0.143325] drivers/spi/spi_sunxi.c(L2114) sw spi init fetch spi0 uning configuration failed
<4>[ 0.143346] drivers/spi/spi_sunxi.c(L2005) Get spi devices number failed
<4>[ 0.143357] drivers/spi/spi_sunxi.c(L2124) register spi devices board info failed
<4>[ 0.143367] cannot find any using configuration for all spi controllers!
<6>[ 0.143388] PPP generic driver version 2.4.2
<6>[ 0.143544] PPP Deflate Compression module registered
<6>[ 0.143555] PPP BSD Compression module registered
<6>[ 0.144570] PPP MPPE Compression module registered
<6>[ 0.144586] NET: Registered protocol family 24
<6>[ 0.144632] PPTP driver version 0.8.5
<6>[ 0.144956] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.144964] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[ 0.145236] usbcore: registered new interface driver cdc_ether
<6>[ 0.145281] usbcore: registered new interface driver cdc_eem
<6>[ 0.145323] usbcore: registered new interface driver cdc_subset
<6>[ 0.145367] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.145424] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 0.145533] usbcore: registered new interface driver cdc_acm
<6>[ 0.145541] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[ 0.145550] Initializing USB Mass Storage driver...
<6>[ 0.145640] usbcore: registered new interface driver usb-storage
<6>[ 0.145648] USB Mass Storage support registered.
<6>[ 0.145690] usbcore: registered new interface driver ums-alauda
<6>[ 0.145734] usbcore: registered new interface driver ums-cypress
<6>[ 0.145775] usbcore: registered new interface driver ums-datafab
<6>[ 0.145824] usbcore: registered new interface driver ums_eneub6250
<6>[ 0.145867] usbcore: registered new interface driver ums-freecom
<6>[ 0.145909] usbcore: registered new interface driver ums-isd200
<6>[ 0.145950] usbcore: registered new interface driver ums-jumpshot
<6>[ 0.145997] usbcore: registered new interface driver ums-karma
<6>[ 0.146040] usbcore: registered new interface driver ums-onetouch
<6>[ 0.146094] usbcore: registered new interface driver ums-realtek
<6>[ 0.146136] usbcore: registered new interface driver ums-sddr09
<6>[ 0.146184] usbcore: registered new interface driver ums-sddr55
<6>[ 0.146229] usbcore: registered new interface driver ums-usbat
<6>[ 0.146349] usbcore: registered new interface driver usbserial
<6>[ 0.146390] USB Serial support registered for generic
<6>[ 0.146439] usbcore: registered new interface driver usbserial_generic
<6>[ 0.146448] usbserial: USB Serial Driver core
<6>[ 0.146483] USB Serial support registered for GSM modem (1-port)
<6>[ 0.146602] usbcore: registered new interface driver option
<6>[ 0.146610] option: v0.7.2:USB Driver for GSM modems
<4>[ 0.146646] ------print_msc_config-----
<4>[ 0.146653] vendor_id = 0x18d1
<4>[ 0.146660] mass_storage_id = 0x1
<4>[ 0.146666] adb_id = 0x2
<4>[ 0.146672] usb_manufacturer_name = USB Developer
<4>[ 0.146679] usb_product_name = Android
<4>[ 0.146685] usb_serial_number = 20080411
<4>[ 0.146692] msc_vendor_name = USB 2.0
<4>[ 0.146700] msc_product_name = USB Flash Driver
<4>[ 0.146707] msc_release = 100
<4>[ 0.146713] luns = 2
<4>[ 0.146719] ---------------------------
<4>[ 0.146870] [sw_udc]: [sw_usb_udc]: binding gadget driver 'android_usb'
<4>[ 0.146885] [sw_udc]: alloc request: ep(0xc08d1380, ep0, 64), req(0xdf08df80)
<4>[ 0.146901] WRN:L2712(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
<4>[ 0.146915] [sw_udc]: sw_udc_pullup, is_on = 0
<4>[ 0.146925] WRN:L2747(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
<6>[ 0.148120] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 0.148137] android_usb gadget: Number of LUNs=2
<6>[ 0.148147] lun0: LUN: removable file: (no medium)
<6>[ 0.148155] lun1: LUN: removable file: (no medium)
<4>[ 0.148166] lun name: lun
<4>[ 0.148178] lun name: lun1
<4>[ 0.148338] WRN:L2712(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR: usb device is not active
<6>[ 0.148359] android_usb gadget: android_usb ready
<6>[ 0.148486] mousedev: PS/2 mouse device common for all mice
<4>[ 0.148571] scan_code 0x0
<6>[ 0.148592] keyboard map config:115,114,158,0,0,0,0,0,0,0,0,0,0
<6>[ 0.148778] input: sw-keyboard as /devices/virtual/input/input0
<4>[ 0.148896] ==register_early_suspend =
<6>[ 0.149316] i2c /dev entries driver
<4>[ 0.149443] !!! base_Addr = 0xe08f6c00
<4>[ 0.149465] config i2c gpio with gpio_config api
<4>[ 0.149521] twi0, apb clock = 24000000
<6>[ 0.151538] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
<4>[ 0.152511] rtc_detect,line:197
<6>[ 0.152520] I2C: i2c-0: AW16XX I2C adapter
<4>[ 0.152526] **********start************
<4>[ 0.152533] 0x40
<4>[ 0.152538] 0xf8
<4>[ 0.152543] 0x28
<4>[ 0.152548] 0x0
<4>[ 0.152552] 0x0
<4>[ 0.152557] **********end************
<4>[ 0.152601] !!! base_Addr = 0xe08f8000
<4>[ 0.152654] twi1, apb clock = 24000000
<6>[ 0.152862] rtc_detect: Detected chip pcf8563 at adapter 1, address 0x51
<6>[ 0.152937] pcf8563 1-0051: chip found, driver version 0.4.3
<4>[ 0.156653] rtc (null): alarm rollover not handled
<6>[ 0.156851] using rtc device, pcf8563, for alarms
<6>[ 0.156889] pcf8563 1-0051: rtc core: registered pcf8563 as rtc0
<6>[ 0.159421] I2C: i2c-1: AW16XX I2C adapter
<4>[ 0.159429] **********start************
<4>[ 0.159435] 0x40
<4>[ 0.159440] 0xf8
<4>[ 0.159445] 0x58
<4>[ 0.159450] 0x0
<4>[ 0.159454] 0x0
<4>[ 0.159458] **********end************
<4>[ 0.159503] !!! base_Addr = 0xe08fa400
<4>[ 0.159557] twi2, apb clock = 24000000
<4>[ 0.159744] rtc_detect,line:197
<6>[ 0.159752] I2C: i2c-2: AW16XX I2C adapter
<4>[ 0.159758] **********start************
<4>[ 0.159764] 0x40
<4>[ 0.159769] 0xf8
<4>[ 0.159773] 0x58
<4>[ 0.159778] 0x0
<4>[ 0.159783] 0x0
<4>[ 0.159787] **********end************
<6>[ 0.159940] lirc_dev: IR Remote Control driver registered, major 250
<6>[ 0.159950] IR NEC protocol handler initialized
<6>[ 0.159957] IR RC5(x) protocol handler initialized
<6>[ 0.159964] IR RC6 protocol handler initialized
<6>[ 0.159971] IR JVC protocol handler initialized
<6>[ 0.159977] IR Sony protocol handler initialized
<6>[ 0.159985] IR RC5 (streamzap) protocol handler initialized
<6>[ 0.159992] IR LIRC bridge handler initialized
<6>[ 0.159999] Linux video capture interface: v2.00
<4>[ 0.160177] [pa_drv] start!!!
<4>[ 0.160461] [pa_drv] init end!!!
<6>[ 0.160578] print_constraints: axp20_ldo1: 1300 mV
<6>[ 0.161506] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
<6>[ 0.162622] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 3300 mV
<6>[ 0.163531] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 3300 mV
<6>[ 0.164425] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1500 mV
<6>[ 0.165315] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1400 mV
<6>[ 0.165698] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
<6>[ 0.165957] input: axp20-supplyer as /devices/platform/sun5i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
<4>[ 0.173227] pmu_pekoff_time = 6000
<4>[ 0.173237] pmu_pekoff_en = 1
<4>[ 0.173243] pmu_peklong_time = 1500
<4>[ 0.173249] pmu_pekon_time = 1000
<4>[ 0.173255] pmu_pwrok_time = 64
<4>[ 0.173260] pmu_pwrnoe_time = 2000
<4>[ 0.173266] pmu_intotp_en = 1
<4>[ 0.173737] [AXP]POWER20_OFF_CTL:2012-->0x42
<4>[ 0.174209] POWER20_PEK_SET:2029-->0x9d
<4>[ 0.174680] POWER20_PEK_SET:2040-->0x9d
<4>[ 0.175151] POWER20_PEK_SET:2049-->0x9d
<4>[ 0.175621] POWER20_PEK_SET:2060-->0x9d
<4>[ 0.176093] POWER20_PEK_SET:2072-->0x9d
<4>[ 0.176564] POWER20_HOTOVER_CTL:2081-->0xad
<4>[ 0.180300] [AXP]last_rest_vol = 100, now_rest_vol = 96
<4>[ 0.181812] [AXP]Cur_CoulombCounter = 0
<4>[ 0.181821] [AXP]charger->rest_vol = 100
<6>[ 0.184543] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
<6>[ 0.184957] device-mapper: multipath: version 1.3.0 loaded
<6>[ 0.184971] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>[ 0.184982] device-mapper: multipath queue-length: version 0.1.0 loaded
<6>[ 0.184992] device-mapper: multipath service-time: version 0.2.0 loaded
<4>[ 0.185478] [mmc_pm]: no sdio card used in configuration
<4>[ 0.185489] [mmc]: sunximmc_init
<4>[ 0.185597] [mmc]: sunxi mmc controller using config : 0x1
<4>[ 0.185656] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
<4>[ 0.185986] [mmc]: mmc 0 power off !!
<4>[ 0.186069] [mmc]: mmc0 Probe: base:0xe08fc000 irq:32 dma:0 pdes:0xffdff000, ret 0.
<6>[ 0.186717] usbcore: registered new interface driver usbhid
<6>[ 0.186730] usbhid: USB HID core driver
<6>[ 0.187162] logger: created 256K log 'log_main'
<6>[ 0.187243] logger: created 256K log 'log_events'
<6>[ 0.187317] logger: created 256K log 'log_radio'
<6>[ 0.187391] logger: created 256K log 'log_system'
<4>[ 0.187944] enter sun5i Audio codec!!!
<6>[ 0.188647] sun5i audio support initialized
<4>[ 0.188875] sun5i Audio codec successfully loaded..
<4>[ 0.188927] [audio]sun5i_codec_init fetch audio_capture_gain failed
<4>[ 0.188938] [audio]sun5i_codec_init fetch audio_input_gain failed
<6>[ 0.188946] ALSA device list:
<6>[ 0.188955] #0: sun5i-CODEC Audio Codec
<6>[ 0.189106] Netfilter messages via NETLINK v0.30.
<6>[ 0.189193] nf_conntrack version 0.5.0 (5653 buckets, 22612 max)
<6>[ 0.189683] ctnetlink v0.93: registering with nfnetlink.
<6>[ 0.189698] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 0.189707] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 0.189991] IPv4 over IPv4 tunneling driver
<6>[ 0.190430] GRE over IPv4 demultiplexor driver
<6>[ 0.190441] GRE over IPv4 tunneling driver
<6>[ 0.190934] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 0.191086] TCP cubic registered
<6>[ 0.191094] Initializing XFRM netlink socket
<6>[ 0.191862] NET: Registered protocol family 10
<6>[ 0.192663] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 0.192837] IPv6 over IPv4 tunneling driver
<6>[ 0.193590] NET: Registered protocol family 17
<6>[ 0.193637] NET: Registered protocol family 15
<6>[ 0.193652] L2TP core driver, V2.0
<6>[ 0.193668] PPPoL2TP kernel driver, V2.0
<6>[ 0.193674] L2TP IP encapsulation support (L2TPv3)
<6>[ 0.193887] L2TP netlink interface
<6>[ 0.193924] L2TP ethernet pseudowire support (L2TPv3)
<6>[ 0.193934] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
<5>[ 0.193966] Registering SWP/SWPB emulation handler
<4>[ 0.194205] dram_sysdev_init finished!
<6>[ 0.195154] registered taskstats version 1
<4>[ 0.195184] [LCD] lcd_module_init
<4>[ 0.196845] [DISP WRN] file:drivers/video/sun5i/disp/de_bsp/de/disp_lcd.c,line:324: fetch script data lcd0_para.lcd_max_bright set as default 223
<4>[ 0.196870] [DISP WRN] file:drivers/video/sun5i/disp/de_bsp/de/disp_lcd.c,line:335: fetch script data lcd0_para.lcd_min_bright set as default 64
<4>[ 0.763488] regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
<4>[ 0.763769] regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
<4>[ 0.764037] regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
<4>[ 0.764303] regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
<4>[ 0.764569] regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
<4>[ 0.764836] regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
<4>[ 0.764915] WRN:L118(drivers/usb/host/sw_hci_sun5i.c):ERR: get usb_drv_vbus_1_gpio usbc1(usbc1) id failed
<4>[ 0.764931] WRN:L138(drivers/usb/host/sw_hci_sun5i.c):ERR: sw-ehci1(drv vbus_1) is invalid
<4>[ 0.764965] WRN:L118(drivers/usb/host/sw_hci_sun5i.c):ERR: get usb_drv_vbus_1_gpio usbc1(usbc1) id failed
<4>[ 0.764980] WRN:L138(drivers/usb/host/sw_hci_sun5i.c):ERR: sw-ohci1(drv vbus_1) is invalid
<4>[ 0.765608] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc09a0c2c
<4>[ 0.765623] [sw-ehci1]: open clock
<4>[ 0.785620] usb_passby en=1,passly=0
<4>[ 0.785629] hci_port_configure en=1,config_cnt=0
<4>[ 0.785639] [sw-ehci1]: sw_set_vbus cnt 1
<4>[ 0.785646] [sw-ehci1]: Set USB Power ON
<6>[ 0.786394] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.786428] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
<6>[ 0.786547] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
<6>[ 0.800047] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
<4>[ 0.800061] ehci_irq: port change detect
<6>[ 0.800591] hub 2-0:1.0: USB hub found
<6>[ 0.800620] hub 2-0:1.0: 1 port detected
<4>[ 0.800853] [sw-ehci1]: sw_usb_disable_ehci
<4>[ 0.800866] [sw-ehci1]: remove, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc09a0c2c
<6>[ 0.800876] sw-ehci sw-ehci.1: remove, state 1
<6>[ 0.800896] usb usb2: USB disconnect, device number 1
<6>[ 0.801616] sw-ehci sw-ehci.1: USB bus 2 deregistered
<4>[ 0.801632] [sw-ehci1]: sw_set_vbus cnt 0
<4>[ 0.801640] [sw-ehci1]: Set USB Power OFF
<4>[ 0.802128] hci_port_configure en=0,config_cnt=1
<4>[ 0.802140] usb_passby en=0,passly=1
<4>[ 0.802147] [sw-ehci1]: close clock
<4>[ 0.802289] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc09a0d84
<4>[ 0.802303] [sw-ohci1]: open clock
<4>[ 0.822334] hci_port_configure en=1,config_cnt=0
<4>[ 0.822343] usb_passby en=1,passly=0
<4>[ 0.822350] [sw-ohci1]: sw_set_vbus cnt 1
<4>[ 0.822358] [sw-ohci1]: Set USB Power ON
<6>[ 0.823098] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>[ 0.823125] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 2
<6>[ 0.823159] sw-ohci sw-ohci.1: irq 40, io mem 0xf1c14400
<6>[ 0.884436] hub 2-0:1.0: USB hub found
<6>[ 0.884459] hub 2-0:1.0: 1 port detected
<4>[ 0.884656] [sw-ohci1]: sw_usb_disable_ohci
<4>[ 0.884668] [sw-ohci1]: remove, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc09a0d84
<6>[ 0.884679] sw-ohci sw-ohci.1: remove, state 1
<6>[ 0.884696] usb usb2: USB disconnect, device number 1
<6>[ 0.885012] sw-ohci sw-ohci.1: USB bus 2 deregistered
<4>[ 0.885026] [sw-ohci1]: sw_set_vbus cnt 0
<4>[ 0.885033] [sw-ohci1]: Set USB Power OFF
<4>[ 0.885521] usb_passby en=0,passly=1
<4>[ 0.885531] hci_port_configure en=0,config_cnt=1
<4>[ 0.885539] [sw-ohci1]: close clock
<4>[ 0.885589] portpm init---------
<4>[ 0.885761] portpm probe begin
<4>[ 0.885781] ERR: get pm_cfg:restrict_1a failed
<4>[ 0.885789] ERR: get pm_cfg:restrict_500ma failed
<4>[ 0.885798] ERR: get pm_cfg:v_1a failed
<4>[ 0.885809] ERR: get pm_cfg:c_1a failed
<4>[ 0.885816] ERR: get pm_cfg:v_500ma failed
<4>[ 0.885824] ERR: get pm_cfg:c_500ma failed
<4>[ 0.885831] ERR: get pm_cfg:v_disable failed
<4>[ 0.885839] ERR: get pm_cfg:c_disable failed
<4>[ 0.885847] ERR: get pm_cfg:ctrl_gpio failed
<4>[ 0.885869] restrict_1a = 0, restrict_500ma = 0
<4>[ 0.885873] v_1a = 0, c_1a = 0, v_500ma = 0, c_500ma = 0
<4>[ 0.885878] v_disable = 0, c_disable = 0
<4>[ 0.885882] ignore_usbc_num[0] = 0
<4>[ 0.885885] ignore_usbc_num[1] = 1
<4>[ 0.885889] ignore_usbc_num[2] = 0
<4>[ 0.885899] request ctrl gpio failed
<6>[ 0.887177] pcf8563 1-0051: setting system clock to 2015-10-13 19:18:03 UTC (1444763883)
<4>[ 0.887306] Warning: unable to open an initial console.
<6>[ 0.887355] Freeing init memory: 168K
<3>[ 0.890368] init: /init.rc: 558: ignored duplicate definition of service 'iprenew_wlan0'
<3>[ 0.891207] init: /init.topwise.boot.rc: 24: invalid command 'sleep'
<4>[ 0.891686] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<3>[ 0.933258] init: width = 800
<3>[ 0.933281] init: height = 480
<3>[ 0.933292] init: s.st_size = 1536000
<6>[ 0.942269] init: command 'loglevel' r=0
<6>[ 0.942317] init: command 'export' r=0
<6>[ 0.942333] init: command 'export' r=0
<6>[ 0.942346] init: command 'export' r=0
<6>[ 0.942358] init: command 'export' r=0
<6>[ 0.942371] init: command 'export' r=0
<6>[ 0.942384] init: command 'export' r=0
<6>[ 0.942396] init: command 'export' r=0
<6>[ 0.942409] init: command 'export' r=0
<6>[ 0.942474] init: command 'export' r=0
<4>[ 0.955204] hello:init_nand_libmodule,21
<4>[ 0.955222] hello:init_nand_libmodule,22
<4>[ 0.955229] nand_init,line:1334
<4>[ 0.955241] [NAND]nand driver, init.
<4>[ 0.955251] [NAND] nand driver version: 0x2, 0x11, data: 20130104
<4>[ 0.955259] [NAND] nand driver: secure debug v1.2.9, 20121103, 13:09
<4>[ 0.955267] [NAND] nand clk request start
<4>[ 0.955289] [NAND] nand clk request ok!
<4>[ 0.955337] [NAND] nand gpio_request
<4>[ 0.955398] [NAND] nand gpio_request fail
<4>[ 0.955412] NAND_RequestDMA ok
<4>[ 0.955773] [NAND] nand driver version: 0x2 0x11
<4>[ 0.955807] nand interrupte register ok
<4>[ 0.955820] nand init fetch nand_good_block_ratio failed
<4>[ 0.955844] Request memory for lsb page table
<4>[ 0.955852] page type: 0
<4>[ 0.955859] Init lsb page table ok
<4>[ 0.992762] The 0 disk name = bootloader, class name = DISK, disk size = df12a824
<4>[ 0.992777] The 1 disk name = env, class name = DISK, disk size = df12a864
<4>[ 0.992787] The 2 disk name = boot, class name = DISK, disk size = df12a8a4
<4>[ 0.992797] The 3 disk name = system, class name = DISK, disk size = df12a8e4
<4>[ 0.992806] The 4 disk name = data, class name = DISK, disk size = df12a924
<4>[ 0.992816] The 5 disk name = misc, class name = DISK, disk size = df12a964
<4>[ 0.992825] The 6 disk name = recovery, class name = DISK, disk size = df12a9a4
<4>[ 0.992834] The 7 disk name = cache, class name = DISK, disk size = df12a9e4
<4>[ 0.992844] The 8 disk name = databk, class name = DISK, disk size = df12aa24
<4>[ 0.992853] The 9 disk name = private, class name = DISK, disk size = df12aa64
<4>[ 0.992863] The 10 disk name = UDISK, class name = DISK, disk size = df12aaa4
<4>[ 0.992876] nand part 2048 start sec is not align
<4>[ 0.992885] Part 0: part_type: 0x0
<4>[ 0.992891] startblock: 0x0, endblock 0x4
<4>[ 0.992898] nand part 2048 start sec is not align
<4>[ 0.992905] nand part 4096 sec count is not align
<4>[ 0.992912] Part 1: part_type: 0x0
<4>[ 0.992918] startblock: 0x4, endblock 0x4
<4>[ 0.992924] nand part 6144 start sec is not align
<4>[ 0.992932] Part 2: part_type: 0x0
<4>[ 0.992938] startblock: 0x4, endblock 0xc
<4>[ 0.992944] nand part 6144 start sec is not align
<4>[ 0.992951] Part 3: part_type: 0x2
<4>[ 0.992958] startblock: 0xc, endblock 0x8c
<4>[ 0.992964] nand part 6144 start sec is not align
<4>[ 0.992971] Part 4: part_type: 0x2
<4>[ 0.992978] startblock: 0x8c, endblock 0x18c
<4>[ 0.992984] nand part 6144 start sec is not align
<4>[ 0.992991] nand part 2048 sec count is not align
<4>[ 0.992998] Part 5: part_type: 0x2
<4>[ 0.993004] startblock: 0x18c, endblock 0x18c
<4>[ 0.993011] Part 6: part_type: 0x2
<4>[ 0.993018] startblock: 0x18d, endblock 0x195
<4>[ 0.993025] Part 7: part_type: 0x2
<4>[ 0.993031] startblock: 0x195, endblock 0x1d5
<4>[ 0.993038] Part 8: part_type: 0x0
<4>[ 0.993044] startblock: 0x1d5, endblock 0x215
<4>[ 0.993051] Part 9: part_type: 0x0
<4>[ 0.993057] startblock: 0x215, endblock 0x219
<4>[ 0.993064] Part 10: part_type: 0x0
<4>[ 0.993071] startblock: 0x219, endblock 0x720
<6>[ 0.994827] nanda:
<6>[ 0.996584] nandb: unknown partition table
<6>[ 0.998162] nandc: unknown partition table
<6>[ 0.999728] nandd: unknown partition table
<6>[ 1.001701] nande: unknown partition table
<6>[ 1.003278] nandf: unknown partition table
<6>[ 1.004712] nandg: unknown partition table
<6>[ 1.006581] nandh: unknown partition table
<6>[ 1.008067] nandi: unknown partition table
<6>[ 1.009541] nandj: unknown partition table
<6>[ 1.010902] nandk:
<6>[ 1.011270] benn: nand probe enter
<4>[ 1.011404] [NAND]nand driver, ok.
<6>[ 1.011765] init: command 'insmod' r=0
<6>[ 1.011857] init: command 'symlink' r=0
<6>[ 1.011895] init: command 'symlink' r=0
<6>[ 1.011928] init: command 'symlink' r=0
<6>[ 1.011955] init: command 'mkdir' r=0
<6>[ 1.012212] init: command 'mount' r=0
<6>[ 1.012334] init: command 'mkdir' r=0
<6>[ 1.012409] init: command 'mkdir' r=0
<6>[ 1.012467] init: command 'mkdir' r=0
<6>[ 1.012516] init: command 'mkdir' r=0
<6>[ 1.012555] init: command 'mkdir' r=0
<6>[ 1.012597] init: command 'mkdir' r=0
<6>[ 1.012653] init: command 'mkdir' r=0
<6>[ 1.012691] init: command 'mkdir' r=0
<6>[ 1.012733] init: command 'mkdir' r=0
<6>[ 1.012827] init: command 'mount' r=0
<6>[ 1.012879] init: command 'mkdir' r=0
<6>[ 1.012953] init: command 'mount' r=0
<6>[ 1.013067] init: command 'write' r=0
<6>[ 1.013145] init: command 'write' r=-2
<6>[ 1.013217] init: command 'write' r=0
<6>[ 1.013268] init: command 'write' r=0
<6>[ 1.013311] init: command 'write' r=0
<6>[ 1.013357] init: command 'write' r=-2
<6>[ 1.013397] init: command 'write' r=0
<6>[ 1.013452] init: command 'write' r=0
<6>[ 1.013498] init: command 'write' r=0
<6>[ 1.013539] init: command 'write' r=0
<6>[ 1.013596] init: command 'write' r=0
<6>[ 1.013641] init: command 'write' r=0
<6>[ 1.013682] init: command 'write' r=0
<6>[ 1.013714] init: command 'mkdir' r=0
<6>[ 1.013790] init: command 'mount' r=-1
<6>[ 1.013830] init: command 'chown' r=0
<6>[ 1.013866] init: command 'chown' r=-2
<6>[ 1.013898] init: command 'chmod' r=-2
<6>[ 1.013982] init: command 'write' r=0
<6>[ 1.014038] init: command 'write' r=0
<6>[ 1.014086] init: command 'write' r=0
<6>[ 1.014117] init: command 'mkdir' r=0
<6>[ 1.014152] init: command 'chown' r=-2
<6>[ 1.014188] init: command 'chmod' r=-2
<6>[ 1.014242] init: command 'write' r=0
<6>[ 1.014290] init: command 'write' r=0
<6>[ 1.014341] init: command 'write' r=0
<6>[ 1.014368] init: command 'mkdir' r=0
<6>[ 1.014405] init: command 'chown' r=-2
<6>[ 1.014437] init: command 'chmod' r=-2
<6>[ 1.014487] init: command 'write' r=0
<6>[ 1.014558] init: command 'write' r=0
<6>[ 1.014609] init: command 'write' r=0
<6>[ 1.014667] init: command 'chmod' r=0
<6>[ 1.014699] init: processing action 0x1970ff0 (fs)
<6>[ 1.022801] EXT4-fs (nandd): barriers disabled
<6>[ 1.024411] EXT4-fs (nandd): mounted filesystem with ordered data mode. Opts: barrier=0
<6>[ 1.024482] init: command 'mount' r=0
<6>[ 1.024546] init: command 'wait' r=0
<6>[ 1.032535] EXT4-fs (nande): barriers disabled
<7>[ 1.041622] EXT4-fs (nande): ext4_orphan_cleanup: deleting unreferenced inode 57808
<6>[ 1.042727] EXT4-fs (nande): 1 orphan inode deleted
<6>[ 1.042739] EXT4-fs (nande): recovery complete
<6>[ 1.043426] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: barrier=0
<6>[ 1.043497] init: command 'mount' r=0
<6>[ 1.043662] init: command 'setupfs' r=0
<3>[ 1.043684] init: do_umount: /data
<6>[ 1.050138] init: command 'umount' r=0
<6>[ 1.131200] init: command 'exec' r=0
<6>[ 1.201370] EXT4-fs (nande): barriers disabled
<6>[ 1.202559] EXT4-fs (nande): mounted filesystem with ordered data mode. Opts: barrier=0,journal_checksum,noauto_da_alloc
<6>[ 1.202925] init: command 'exec' r=0
<6>[ 1.210930] EXT4-fs (nandh): barriers disabled
<6>[ 1.212044] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: barrier=0
<6>[ 1.212107] init: command 'mount' r=0
<6>[ 1.212251] init: command 'setupfs' r=0
<3>[ 1.212270] init: do_umount: /cache
<6>[ 1.220128] init: command 'umount' r=0
<6>[ 1.238434] init: command 'exec' r=0
<6>[ 1.248165] EXT4-fs (nandh): barriers disabled
<6>[ 1.249324] EXT4-fs (nandh): mounted filesystem with ordered data mode. Opts: barrier=0,journal_checksum,noauto_da_alloc
<6>[ 1.249678] init: command 'exec' r=0
<3>[ 1.250684] init: dont need format /dev/block/nandk
<6>[ 1.250711] init: command 'format_userdata' r=1
<6>[ 1.250756] init: command 'wait' r=0
<6>[ 1.258993] EXT4-fs (nandi): barriers disabled
<6>[ 1.260817] EXT4-fs (nandi): mounted filesystem with ordered data mode. Opts: barrier=0
<6>[ 1.260886] init: command 'mount' r=0
<6>[ 1.261033] init: command 'setupfs' r=0
<3>[ 1.261054] init: do_umount: /databk
<6>[ 1.270133] init: command 'umount' r=0
<6>[ 1.270202] init: command 'rmdir' r=0
<6>[ 1.270233] init: processing action 0x196a628 (post-fs)
<6>[ 1.270358] init: command 'chown' r=0
<6>[ 1.270402] init: command 'chmod' r=0
<6>[ 1.271343] init: command 'chown' r=-2
<6>[ 1.271376] init: command 'chmod' r=-2
<6>[ 1.271456] init: command 'chown' r=0
<6>[ 1.271502] init: command 'chmod' r=0
<6>[ 1.271548] init: command 'chown' r=0
<6>[ 1.271589] init: command 'chmod' r=0
<6>[ 1.271635] init: command 'chown' r=0
<6>[ 1.271674] init: command 'chmod' r=0
<6>[ 1.271779] init: command 'mkdir' r=0
<6>[ 1.271808] init: processing action 0x196a818 (post-fs-data)
<6>[ 1.271869] init: command 'chown' r=0
<6>[ 1.271908] init: command 'chmod' r=0
<6>[ 1.280613] init: command 'mkdir' r=0
<6>[ 1.280671] init: command 'copy' r=-1
<6>[ 1.281530] init: command 'chown' r=-2
<6>[ 1.281561] init: command 'chmod' r=-2
<6>[ 1.281591] init: command 'copy' r=-1
<6>[ 1.281626] init: command 'chown' r=-2
<6>[ 1.281648] init: command 'chmod' r=-2
<6>[ 1.281674] init: command 'write' r=-2
<6>[ 1.288998] init: command 'mkdir' r=0
<6>[ 1.289899] init: command 'mkdir' r=0
<6>[ 1.289975] init: command 'mkdir' r=0
<6>[ 1.290119] init: command 'mkdir' r=0
<6>[ 1.290194] init: command 'mkdir' r=0
<6>[ 1.290262] init: command 'mkdir' r=0
<6>[ 1.290332] init: command 'mkdir' r=0
<6>[ 1.290404] init: command 'mkdir' r=0
<6>[ 1.291220] init: command 'chmod' r=0
<6>[ 1.291269] init: command 'chown' r=0
<6>[ 1.291352] init: command 'mkdir' r=0
<6>[ 1.291424] init: command 'mkdir' r=0
<6>[ 1.291459] init: command 'chown' r=0
<6>[ 1.298110] init: command 'mkdir' r=0
<6>[ 1.305442] init: command 'mkdir' r=0
<6>[ 1.305536] init: command 'mkdir' r=0
<6>[ 1.305647] init: command 'chmod' r=0
<6>[ 1.306467] init: command 'chmod' r=0
<6>[ 1.306532] init: command 'chmod' r=0
<6>[ 1.306584] init: command 'chmod' r=0
<6>[ 1.306627] init: command 'chown' r=0
<6>[ 1.306661] init: command 'chown' r=0
<6>[ 1.306694] init: command 'chown' r=0
<6>[ 1.306727] init: command 'chown' r=0
<6>[ 1.307620] init: command 'mkdir' r=0
<6>[ 1.314483] init: command 'mkdir' r=0
<6>[ 1.321120] init: command 'mkdir' r=0
<6>[ 1.327786] init: command 'mkdir' r=0
<6>[ 1.327875] init: command 'mkdir' r=0
<6>[ 1.327949] init: command 'mkdir' r=0
<6>[ 1.328021] init: command 'mkdir' r=0
<6>[ 1.328908] init: command 'mkdir' r=0
<6>[ 1.328991] init: command 'mkdir' r=0
<6>[ 1.329085] init: command 'mkdir' r=0
<6>[ 1.329120] init: command 'chown' r=0
<6>[ 1.329153] init: command 'chmod' r=0
<6>[ 1.329225] init: command 'mkdir' r=0
<6>[ 1.329295] init: command 'mkdir' r=0
<6>[ 1.329325] init: processing action 0x196f5c8 (post-fs-data)
<6>[ 1.329512] init: command 'chown' r=0
<6>[ 1.329593] init: command 'chmod' r=0
<6>[ 1.329665] init: command 'chown' r=0
<6>[ 1.329719] init: command 'chmod' r=0
<6>[ 1.329735] init: processing action 0x1973c60 (property_service_init)
<6>[ 1.333168] init: Created socket '/dev/socket/property_service' with mode '666', user '0', group '0'
<3>[ 1.334059] FAT-fs (nandj): bogus number of reserved sectors
<6>[ 1.334073] FAT-fs (nandj): Can't find a valid FAT filesystem
<3>[ 1.340092] init: mount /dev/block/nandj failed!
<3>[ 1.340129] init: open /mnt/private/sn.txt failed
<3>[ 1.340149] init: open /mnt/private/imei.txt failed
<6>[ 1.340195] init: command 'property_service_init' r=0
<6>[ 1.340231] init: processing action 0x1973ca8 (signal_init)
<6>[ 1.340314] init: command 'signal_init' r=0
<6>[ 1.340341] init: processing action 0x1973cf0 (check_startup)
<6>[ 1.340391] init: command 'check_startup' r=0
<6>[ 1.340412] init: processing action 0x196b0c8 (boot)
<6>[ 1.340935] init: command 'ifup' r=0
<6>[ 1.341070] init: command 'hostname' r=0
<6>[ 1.341121] init: command 'domainname' r=0
<6>[ 1.341146] init: command 'setrlimit' r=0
<6>[ 1.341210] init: command 'write' r=0
<6>[ 1.341260] init: command 'write' r=0
<6>[ 1.341399] init: command 'chown' r=0
<6>[ 1.341446] init: command 'chmod' r=0
<6>[ 1.341495] init: command 'chown' r=0
<6>[ 1.341531] init: command 'chmod' r=0
<6>[ 1.341582] init: command 'write' r=0
<6>[ 1.341626] init: command 'write' r=0
<6>[ 1.341663] init: command 'chown' r=-2
<6>[ 1.341696] init: command 'chown' r=-2
<6>[ 1.341725] init: command 'chown' r=-2
<6>[ 1.341753] init: command 'chown' r=-2
<6>[ 1.341782] init: command 'chown' r=-2
<6>[ 1.341833] init: command 'chown' r=0
<6>[ 1.341876] init: command 'chown' r=0
<6>[ 1.341918] init: command 'chown' r=0
<6>[ 1.341975] init: command 'chown' r=0
<6>[ 1.342014] init: command 'chmod' r=0
<6>[ 1.342046] init: command 'chmod' r=0
<6>[ 1.342077] init: command 'chmod' r=0
<6>[ 1.342128] init: command 'chown' r=-2
<6>[ 1.342163] init: command 'chmod' r=-2
<6>[ 1.342200] init: command 'chown' r=-2
<6>[ 1.342234] init: command 'chmod' r=-2
<6>[ 1.342269] init: command 'chown' r=-2
<6>[ 1.342304] init: command 'chmod' r=-2
<6>[ 1.342340] init: command 'chown' r=-2
<6>[ 1.342374] init: command 'chmod' r=-2
<6>[ 1.342410] init: command 'chown' r=-2
<6>[ 1.342445] init: command 'chmod' r=-2
<6>[ 1.342484] init: command 'chown' r=-2
<6>[ 1.342517] init: command 'chmod' r=-2
<6>[ 1.342554] init: command 'chown' r=-2
<6>[ 1.342589] init: command 'chown' r=-2
<6>[ 1.342624] init: command 'chmod' r=-2
<6>[ 1.342676] init: command 'chown' r=0
<6>[ 1.342713] init: command 'chmod' r=0
<6>[ 1.342759] init: command 'chown' r=0
<6>[ 1.342800] init: command 'chmod' r=0
<6>[ 1.342848] init: command 'chown' r=-2
<6>[ 1.342897] init: command 'chown' r=-2
<6>[ 1.342930] init: command 'chown' r=-2
<6>[ 1.342965] init: command 'chown' r=-2
<6>[ 1.342998] init: command 'chown' r=-2
<6>[ 1.343032] init: command 'chown' r=-2
<6>[ 1.343065] init: command 'chown' r=-2
<6>[ 1.343098] init: command 'chown' r=-2
<6>[ 1.343131] init: command 'chown' r=-2
<6>[ 1.343164] init: command 'chown' r=-2
<6>[ 1.343197] init: command 'chown' r=-2
<6>[ 1.343232] init: command 'chown' r=-2
<6>[ 1.343264] init: command 'chown' r=-2
<6>[ 1.343297] init: command 'chown' r=-2
<6>[ 1.343330] init: command 'chown' r=-2
<6>[ 1.343368] init: command 'chown' r=-2
<6>[ 1.343400] init: command 'chown' r=-2
<6>[ 1.343434] init: command 'chown' r=-2
<6>[ 1.343480] init: command 'chown' r=-2
<6>[ 1.343548] init: command 'chown' r=0
<6>[ 1.343591] init: command 'chown' r=0
<6>[ 1.343632] init: command 'chown' r=0
<6>[ 1.343672] init: command 'chown' r=0
<6>[ 1.343715] init: command 'chown' r=0
<6>[ 1.343756] init: command 'chown' r=0
<6>[ 1.343833] init: command 'chown' r=0
<6>[ 1.343897] init: command 'setprop' r=0
<6>[ 1.343942] init: command 'setprop' r=0
<6>[ 1.343984] init: command 'setprop' r=0
<6>[ 1.344025] init: command 'setprop' r=0
<6>[ 1.344066] init: command 'setprop' r=0
<6>[ 1.344108] init: command 'setprop' r=0
<6>[ 1.344151] init: command 'setprop' r=0
<6>[ 1.344177] init: command 'setprop' r=0
<3>[ 1.344210] init: service 'console' requires console
<5>[ 1.344308] init: starting 'servicemanager'
<5>[ 1.344716] init: starting 'vold'
<6>[ 1.344974] init: command 'class_start' r=0
<5>[ 1.345054] init: starting 'netd'
<5>[ 1.345331] init: starting 'debuggerd'
<5>[ 1.345597] init: starting 'ril-daemon'
<5>[ 1.345881] init: starting 'surfaceflinger'
<5>[ 1.346168] init: starting 'zygote'
<5>[ 1.346438] init: starting 'drm'
<5>[ 1.346708] init: starting 'media'
<5>[ 1.346988] init: starting 'dbus'
<5>[ 1.347276] init: starting 'installd'
<3>[ 1.347569] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<5>[ 1.347640] init: starting 'keystore'
<5>[ 1.347929] init: starting 'u3gmonitor'
<6>[ 1.348164] init: command 'class_start' r=0
<6>[ 1.348231] init: processing action 0x196e2f8 (boot)
<6>[ 1.348342] init: command 'chmod' r=-2
<6>[ 1.348386] init: command 'chown' r=-2
<6>[ 1.348429] init: command 'chown' r=-2
<6>[ 1.348463] init: command 'chown' r=-2
<6>[ 1.348497] init: command 'chown' r=-2
<6>[ 1.348531] init: command 'chown' r=-2
<6>[ 1.348565] init: command 'chown' r=-2
<6>[ 1.348600] init: command 'chown' r=-2
<6>[ 1.348633] init: command 'chown' r=-2
<6>[ 1.348666] init: command 'chown' r=-2
<6>[ 1.348697] init: command 'chmod' r=-2
<6>[ 1.348728] init: command 'chmod' r=-2
<6>[ 1.348760] init: command 'chmod' r=-2
<6>[ 1.348792] init: command 'chmod' r=-2
<6>[ 1.348824] init: command 'chmod' r=-2
<6>[ 1.348856] init: command 'chmod' r=-2
<6>[ 1.348890] init: command 'chmod' r=-2
<6>[ 1.348922] init: command 'chmod' r=-2
<6>[ 1.348957] init: command 'chmod' r=-2
<6>[ 1.348991] init: command 'chown' r=-2
<6>[ 1.349023] init: command 'chmod' r=-2
<6>[ 1.349057] init: processing action 0x1971340 (boot)
<6>[ 1.349787] init: Created socket '/dev/socket/rild-debug' with mode '660', user '1001', group '1000'
<6>[ 1.349880] init: Created socket '/dev/socket/rild' with mode '660', user '0', group '1001'
<6>[ 1.352513] init: Created socket '/dev/socket/zygote' with mode '660', user '0', group '1000'
<6>[ 1.352951] init: Created socket '/dev/socket/mdns' with mode '660', user '0', group '1000'
<6>[ 1.353028] init: Created socket '/dev/socket/dnsproxyd' with mode '660', user '0', group '3003'
<6>[ 1.355114] init: Created socket '/dev/socket/netd' with mode '660', user '0', group '1000'
<6>[ 1.356531] init: Created socket '/dev/socket/dbus' with mode '660', user '1002', group '1002'
<6>[ 1.356925] init: Created socket '/dev/socket/vold' with mode '660', user '0', group '1009'
<6>[ 1.358798] init: Created socket '/dev/socket/keystore' with mode '666', user '0', group '0'
<6>[ 1.360707] init: Created socket '/dev/socket/installd' with mode '600', user '1000', group '1000'
<4>[ 1.397299] ===================================gsl_ts_init=====================================
<4>[ 1.397319] ctp_is_used =0
<6>[ 1.397326] ctp_fetch_sysconfig_para.
<6>[ 1.397352] ctp_fetch_sysconfig_para: after: ctp_twi_addr is 0x40, dirty_addr_buf: 0x40. dirty_addr_buf[1]: 0xfffe
<6>[ 1.397364] ctp_fetch_sysconfig_para: ctp_twi_id is 1.
<6>[ 1.397523] ctp_fetch_sysconfig_para: screen_max_x = 800.
<6>[ 1.397534] ctp_fetch_sysconfig_para: screen_max_y = 480.
<6>[ 1.397544] ctp_fetch_sysconfig_para: revert_x_flag = 0.
<6>[ 1.397554] ctp_fetch_sysconfig_para: revert_y_flag = 0.
<6>[ 1.397563] ctp_fetch_sysconfig_para: exchange_x_y_flag = 0.
<4>[ 1.397573] gsl_ts_init: after fetch_sysconfig_para: normal_i2c: 0x40. normal_i2c[1]: 0xfffe
<4>[ 1.397622] script parser fetch err.
<4>[ 1.397630] ctp_init_platform_resource: tp_reset request gpio fail!
<6>[ 1.397783] ctp_detect: Detected chip gslX680 at adapter 1, address 0x40
<4>[ 1.397968] GSLX680 Enter gsl_ts_probe
<4>[ 1.397984] ==kzalloc success=
<4>[ 1.397992] [GSLX680] Enter gsl_ts_init_ts
<6>[ 1.398325] input: gslX680 as /devices/platform/sun5i-i2c.1/i2c-1/1-0040/input/input2
<6>[ 1.398566] ctp_set_irq_mode: config gpio to int mode.
<6>[ 1.398594] ctp_set_irq_mode, 326: gpio_int_info, port = 7, port_num = 11.
<6>[ 1.398602] INTERRUPT CONFIG
<6>[ 1.400418] I read reg 0xf0 is 0
<6>[ 1.420501] I write reg 0xf0 0x12
<6>[ 1.440638] I read reg 0xf0 is 0x12
<4>[ 1.490211] gandy-------init_chip start
<4>[ 1.550091] =============gsl_load_fw start==============
<4>[ 1.890442] portpm set vbus on
<4>[ 1.890466] portpm send uevent USB_PORT_STATE=POWER ON
<4>[ 1.890558] is_on = 1, hcd0_set_vbus_cnt = 0
<4>[ 2.080149]
<4>[ 2.080163]
<4>[ 2.080166] insmod_device_driver
<4>[ 2.080170]
<4>[ 2.080188] [sw_udc]: sw_usb_device_enable start
<4>[ 2.080198] [sw_udc]: usb_vbase = 0xf1c13000
<4>[ 2.080207] [sw_udc]: sram_vbase = 0xf1c00000
<4>[ 2.080241] [sw_udc]: open_usb_clock
<4>[ 2.201253] [sw_udc]: usbd_stop_work
<4>[ 2.201316] [sw_udc]: sw_usb_device_enable end
<4>[ 2.845266] =============gsl_load_fw end==============
<4>[ 3.150166] gandy-------init_chip end
<4>[ 3.191545] [GSLX680] End gsl_ts_probe
<6>[ 3.191783] init: command 'insmod' r=0
<6>[ 3.191908] init: waitpid returned pid 85, status = 00000000
<5>[ 3.191926] init: process 'surfaceflinger', pid 85 exited
<5>[ 3.191947] init: process 'surfaceflinger' killing any children in process group
<5>[ 3.191984] init: service 'zygote' is being killed
<5>[ 3.192087] init: starting 'zygote'
<6>[ 3.200491] init: Created socket '/dev/socket/zygote' with mode '660', user '0', group '1000'
<4>[ 3.209376] ===========================pixcir_ts_init=====================
<4>[ 3.209397] ========ctp_is_used = 1===========
<6>[ 3.209812] init: command 'insmod' r=-1
<6>[ 3.209954] init: waitpid returned pid 86, status = 00000009
<3>[ 3.209971] init: untracked pid 86 exited
<4>[ 3.228398] ===========================goodix_ts_init=====================
<4>[ 3.228419] ctp_is_used =1
<6>[ 3.228609] init: command 'insmod' r=0
<3>[ 3.260368] =========Novatek_TouchDriver============
<4>[ 3.260396] ctp_is_used =1
<6>[ 3.260557] init: command 'insmod' r=0
<6>[ 3.276145] ===========================ft5x_ts_init=====================
<4>[ 3.276163] ctp_is_used =1
<6>[ 3.276314] init: command 'insmod' r=0
<4>[ 3.303342] UMP: UMP device driver loaded
<6>[ 3.303579] init: command 'insmod' r=0
<4>[ 3.411619] Mali: enable mali clock
<4>[ 3.421504] Mali: Mali device driver loaded
<6>[ 3.421980] init: command 'insmod' r=0
<4>[ 3.434771] init_cedar_libmodule,21
<4>[ 3.434787] [cedar dev:liba]: install start!!!
<4>[ 3.437831] [cedar dev]: install end!!!
<6>[ 3.437993] init: command 'insmod' r=0
<6>[ 3.454027] init: command 'insmod' r=0
<6>[ 3.463441] init: command 'insmod' r=0
<6>[ 3.478624] init: command 'insmod' r=0
<6>[ 3.494953] init: command 'insmod' r=0
<6>[ 3.512149] init: command 'insmod' r=0
<6>[ 3.544389] [CSI]Welcome to CSI driver
<6>[ 3.544407] [CSI]csi_init
<6>[ 3.560593] [CSI]registered sub device,input_num = 0
<6>[ 3.560894] [CSI]V4L2 device registered as video0
<6>[ 3.561131] init: command 'insmod' r=0
<6>[ 3.561265] init: command 'insmod' r=-1
<6>[ 3.579418] usbcore: registered new interface driver asix
<6>[ 3.579596] init: command 'insmod' r=0
<6>[ 3.593610] usbcore: registered new interface driver qf9700
<6>[ 3.593768] init: command 'insmod' r=0
<6>[ 3.606977] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
<6>[ 3.607131] init: command 'insmod' r=0
<6>[ 3.621743] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
<6>[ 3.622045] usbcore: registered new interface driver rtl8150
<6>[ 3.622203] init: command 'insmod' r=0
<4>[ 3.632185] ======mma7660_init=========.
<4>[ 3.632203] ========gsensor_fetch_sysconfig_para===================
<4>[ 3.632237] gsensor_fetch_sysconfig_para: after: gsensor_twi_addr is 0x4c, dirty_addr_buf: 0x4c. dirty_addr_buf[1]: 0xfffe
<4>[ 3.632252] gsensor_fetch_sysconfig_para: twi_id is 1.
<4>[ 3.632269] mma7660_init: after fetch_sysconfig_para: normal_i2c: 0x4c. normal_i2c[1]: 0xfffe
<6>[ 3.632568] gsensor_detect: Detected chip mma7660 at adapter 1, address 0x4c
<6>[ 3.632829] mma7660 probe
<6>[ 3.795095] mma7660 1-004c: build time Apr 23 2013 12:00:08
<6>[ 3.795798] input: mma7660 as /devices/virtual/input/input3
<6>[ 3.797266] add mma7660 i2c driver
<6>[ 3.797426] init: command 'insmod' r=0
<4>[ 3.811478] ======stk831x_init=========.
<4>[ 3.811496] ========gsensor_fetch_sysconfig_para===================
<3>[ 3.811517] gsensor_fetch_sysconfig_para: script_parser_fetch err.ret = -4.
<5>[ 3.811526] =========script_parser_fetch_err============
<4>[ 3.811533] stk831x_init: err.
<6>[ 3.812091] init: command 'insmod' r=-1
<4>[ 3.825529] dmard06: init
<4>[ 3.825548] ========gsensor_fetch_sysconfig_para===================
<4>[ 3.825579] gsensor_fetch_sysconfig_para: after: gsensor_twi_addr is 0x1c, dirty_addr_buf: 0x1c. dirty_addr_buf[1]: 0xfffe
<4>[ 3.825594] gsensor_fetch_sysconfig_para: twi_id is 1.
<4>[ 3.825618] err: gpio count < =0 ,gpio_count is: 0
<4>[ 3.825627] dmard06_init: after fetch_sysconfig_para: normal_i2c: 0x1c. normal_i2c[1]: 0xfffe
<6>[ 3.825964] gsensor_detect: Detected chip dmard06 at adapter 1, address 0x1c
<4>[ 3.826295] ==probe func==
<6>[ 3.826873] i2c Read SW_RESET = 0
<6>[ 3.827269] i2c Read WHO_AM_I = 0
<4>[ 3.827277] dmard06 gsensor I2C err = 0!
<4>[ 3.827313] dmard06 probe failed
<4>[ 3.827337] dmard06: probe of 1-001c failed with error -1
<6>[ 3.827541] init: command 'insmod' r=0
<6>[ 3.827682] init: command 'insmod' r=-1
<6>[ 3.827725] init: command 'insmod' r=-1
<6>[ 3.827762] init: command 'insmod' r=-1
<6>[ 3.827865] init: command 'chmod' r=-2
<6>[ 3.828054] init: command 'mkdir' r=0
<6>[ 3.829655] init: command 'exec' r=0
<6>[ 3.829830] init: command 'chmod' r=0
<6>[ 3.829964] init: command 'chmod' r=-2
<6>[ 3.829993] init: processing action 0x1973d38 (queue_property_triggers)
<6>[ 3.830210] init: command 'queue_property_triggers' r=0
<6>[ 3.830386] init: processing action 0x196c160 (property:ro.debuggable=1)
<3>[ 3.830410] init: service 'console' requires console
<6>[ 3.830421] init: command 'start' r=0
<6>[ 3.830440] init: processing action 0x196ffc0 (property:persist.sys.usb.config=*)
<6>[ 3.830514] init: command 'setprop' r=0
<6>[ 3.830534] init: processing action 0x1973800 (property:ro.factorytest=0)
<5>[ 3.830575] init: starting 'sitronix'
<6>[ 3.830939] init: command 'start' r=0
<6>[ 3.830992] init: processing action 0x19738a0 (property:ro.factorytest=0)
<6>[ 3.831028] init: command 'start' r=0
<5>[ 3.831216] init: starting 'surfaceflinger'
<6>[ 3.831495] init: command 'start' r=0
<6>[ 3.831582] init: command 'start' r=0
<6>[ 3.831598] init: command 'start' r=0
<6>[ 3.831611] init: processing action 0x19726e0 (property:sys.usb.config=mass_storage,adb)
<3>[ 3.831778] android_usb: already disabled
<6>[ 3.831810] init: command 'write' r=0
<6>[ 3.832036] init: command 'write' r=0
<6>[ 3.832131] init: command 'write' r=0
<3>[ 3.832154] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
<6>[ 3.832235] init: command 'write' r=0
<4>[ 3.832303] ep_matches, wrn: endpoint already claimed, ep(0xc08d13c0, 0xdfbf3e00, ep1-bulk)
<6>[ 3.832365] adb_bind_config
<4>[ 3.832377] ep_matches, wrn: endpoint already claimed, ep(0xc08d13c0, 0xdfbf3e00, ep1-bulk)
<4>[ 3.832387] ep_matches, wrn: endpoint already claimed, ep(0xc08d1400, 0xdfbf3e00, ep2-bulk)
<4>[ 3.832399] ep_matches, wrn: endpoint already claimed, ep(0xc08d13c0, 0xdfbf3e00, ep1-bulk)
<4>[ 3.832409] ep_matches, wrn: endpoint already claimed, ep(0xc08d1400, 0xdfbf3e00, ep2-bulk)
<4>[ 3.832422] ep_matches, wrn: endpoint already claimed, ep(0xc08d1440, 0xdf08ca00, ep3-bulk)
<4>[ 3.832433] [sw_udc]: alloc request: ep(0xc08d1480, ep4-bulk, 512), req(0xded54d80)
<4>[ 3.832446] [sw_udc]: alloc request: ep(0xc08d1440, ep3-bulk, 512), req(0xded54dc0)
<4>[ 3.832459] [sw_udc]: alloc request: ep(0xc08d1440, ep3-bulk, 512), req(0xded54e00)
<4>[ 3.832471] [sw_udc]: alloc request: ep(0xc08d1440, ep3-bulk, 512), req(0xded54e40)
<4>[ 3.832484] [sw_udc]: alloc request: ep(0xc08d1440, ep3-bulk, 512), req(0xded54e80)
<4>[ 3.832498] [sw_udc]: sw_udc_pullup, is_on = 1
<4>[ 3.832507] [sw_udc]: CONFIG_USB_GADGET_DUALSPEED
<4>[ 3.832518] [sw_udc]: usbd_start_work
<6>[ 3.832540] init: command 'write' r=0
<5>[ 3.832587] init: starting 'adbd'
<6>[ 3.833030] init: command 'start' r=0
<3>[ 3.833123] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
<6>[ 3.833168] init: command 'setprop' r=0
<6>[ 3.842697] adb_open
<6>[ 3.860243] init: waitpid returned pid 240, status = 00000200
<5>[ 3.860272] init: process 'sitronix', pid 240 exited
<4>[ 3.887974] [sw_udc]: IRQ: suspend
<4>[ 3.888002] [sw_udc]: ERR: usb speed is unkown
<4>[ 4.106946] [sw_udc]: IRQ: reset
<4>[ 4.106972] [sw_udc]: irq: reset happen, throw away all urb
<5>[ 4.132860] init: starting 'bootanim'
<4>[ 4.256991] [sw_udc]:
<4>[ 4.257015] +++++++++++++++++++++++++++++++++++++
<4>[ 4.257023] [sw_udc]: usb enter high speed.
<4>[ 4.257030] [sw_udc]:
<4>[ 4.257035] +++++++++++++++++++++++++++++++++++++
<6>[ 4.257219] android_work: sent uevent USB_STATE=CONNECTED
<4>[ 4.261780] [sw_udc]: IRQ: reset
<4>[ 4.261796] [sw_udc]: irq: reset happen, throw away all urb
<4>[ 4.397408] [sw_udc]: Set address 1
<6>[ 4.482484] android_usb gadget: high speed config #1: android
<4>[ 4.482520] [sw_udc]: ep enable: ep3(0xc08d1440, ep3-bulk, 128, 512)
<4>[ 4.482542] [sw_udc]: ep enable: ep4(0xc08d1480, ep4-bulk, 0, 512)
<4>[ 4.482602] [sw_udc]: ep enable: ep1(0xc08d13c0, ep1-bulk, 128, 512)
<4>[ 4.482619] [sw_udc]: ep enable: ep2(0xc08d1400, ep2-bulk, 0, 512)
<4>[ 4.482633] [sw_udc]: alloc request: ep(0xc08d13c0, ep1-bulk, 512), req(0xdc64f0c0)
<4>[ 4.482657] [sw_udc]: alloc request: ep(0xc08d1400, ep2-bulk, 512), req(0xdc64f100)
<4>[ 4.482671] [sw_udc]: alloc request: ep(0xc08d13c0, ep1-bulk, 512), req(0xdc64f140)
<4>[ 4.482682] [sw_udc]: alloc request: ep(0xc08d1400, ep2-bulk, 512), req(0xdc64f180)
<6>[ 4.482817] android_work: sent uevent USB_STATE=CONFIGURED
<4>[ 4.527713] nuke: ep num is 0
<4>[ 7.200113] set usbcur 0 mA
<4>[ 7.200403] set usbvol 4000 mV
<6>[ 11.575065] warning: `zygote' uses 32-bit capabilities (legacy support in use)
<6>[ 15.928464] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
<6>[ 16.260429] EXT4-fs (dm-0): re-mounted. Opts: (null)
<6>[ 16.282698] EXT4-fs (dm-0): re-mounted. Opts: (null)
<6>[ 17.472614] acc_open
<6>[ 17.472655] acc_release
<4>[ 17.604101] sw_usb_enable_hcd: usbc_num = 1
<4>[ 17.604144] [sw-ehci1]: sw_usb_enable_ehci
<4>[ 17.604165] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc09a0c2c
<4>[ 17.604200] [sw-ehci1]: open clock
<4>[ 17.645120] usb_passby en=1,passly=0
<4>[ 17.645142] hci_port_configure en=1,config_cnt=0
<4>[ 17.645154] [sw-ehci1]: sw_set_vbus cnt 1
<4>[ 17.645162] [sw-ehci1]: Set USB Power ON
<6>[ 17.653926] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 17.653989] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
<6>[ 17.654120] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
<6>[ 17.670114] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
<4>[ 17.670139] ehci_irq: port change detect
<6>[ 17.671613] hub 2-0:1.0: USB hub found
<6>[ 17.671663] hub 2-0:1.0: 1 port detected
<4>[ 17.672270] [sw-ohci1]: sw_usb_enable_ohci
<4>[ 17.672287] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc09a0d84
<4>[ 17.672301] [sw-ohci1]: open clock
<4>[ 17.700298] hci_port_configure en=1,config_cnt=1
<4>[ 17.700330] usb_passby en=1,passly=1
<4>[ 17.700346] [sw-ohci1]: sw_set_vbus cnt 2
<6>[ 17.700371] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>[ 17.700448] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
<6>[ 17.700553] sw-ohci sw-ohci.1: irq 40, io mem 0xf1c14400
<6>[ 17.768456] hub 3-0:1.0: USB hub found
<6>[ 17.768503] hub 3-0:1.0: 1 port detected
<4>[ 17.775417] rtl8192cu driver version=v4.0.0_5534.20121020
<4>[ 17.775435] build time: Apr 23 2013 12:02:13
<4>[ 17.775444] ##########rtw_suspend_lock_init ###########
<6>[ 17.779510] usbcore: registered new interface driver rtl8192cu
<6>[ 17.990350] usb 2-1: new high speed USB device number 2 using sw-ehci
<6>[ 20.892945] init: waitpid returned pid 401, status = 00000000
<3>[ 20.892978] init: untracked pid 401 exited
<4>[ 22.209639] +rtw_drv_halt
<4>[ 22.209676] ##########rtw_suspend_lock_uninit###########
<6>[ 22.209693] usbcore: deregistering interface driver rtl8192cu
<4>[ 22.211780] sw_usb_disable_hcd: usbc_num = 1
<4>[ 22.211810] [sw-ehci1]: sw_usb_disable_ehci
<4>[ 22.211829] [sw-ehci1]: remove, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc09a0c2c
<6>[ 22.211848] sw-ehci sw-ehci.1: remove, state 1
<6>[ 22.211937] usb usb2: USB disconnect, device number 1
<6>[ 22.211950] usb 2-1: USB disconnect, device number 2
<6>[ 22.220864] sw-ehci sw-ehci.1: USB bus 2 deregistered
<4>[ 22.221018] [sw-ehci1]: sw_set_vbus cnt 1
<4>[ 22.221027] hci_port_configure en=0,config_cnt=2
<4>[ 22.221037] usb_passby en=0,passly=2
<4>[ 22.221043] [sw-ehci1]: close clock
<4>[ 22.221085] [sw-ohci1]: sw_usb_disable_ohci
<4>[ 22.221098] [sw-ohci1]: remove, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc09a0d84
<6>[ 22.221110] sw-ohci sw-ohci.1: remove, state 1
<6>[ 22.221139] usb usb3: USB disconnect, device number 1
<6>[ 22.224101] sw-ohci sw-ohci.1: USB bus 3 deregistered
<4>[ 22.224131] [sw-ohci1]: sw_set_vbus cnt 0
<4>[ 22.224139] [sw-ohci1]: Set USB Power OFF
<4>[ 22.224881] usb_passby en=0,passly=1
<4>[ 22.224893] hci_port_configure en=0,config_cnt=1
<4>[ 22.224905] [sw-ohci1]: close clock
<4>[ 22.224956] -rtw_drv_halt
<4>[ 27.281314] RTL871X: sw_usb_enable_hcd: usbc_num = 1
<4>[ 27.282254] [sw-ehci1]: sw_usb_enable_ehci
<4>[ 27.282281] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1, sw_ehci: 0xc09a0c2c
<4>[ 27.282303] [sw-ehci1]: open clock
<4>[ 27.412405] usb_passby en=1,passly=0
<4>[ 27.412439] hci_port_configure en=1,config_cnt=0
<4>[ 27.412457] [sw-ehci1]: sw_set_vbus cnt 1
<4>[ 27.412465] [sw-ehci1]: Set USB Power ON
<6>[ 27.447000] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 27.447112] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
<6>[ 27.447322] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
<6>[ 27.460148] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
<4>[ 27.460176] ehci_irq: port change detect
<6>[ 27.466049] hub 2-0:1.0: USB hub found
<6>[ 27.466086] hub 2-0:1.0: 1 port detected
<4>[ 27.466406] [sw-ohci1]: sw_usb_enable_ohci
<4>[ 27.466422] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1, sw_ohci: 0xc09a0d84
<4>[ 27.466436] [sw-ohci1]: open clock
<4>[ 27.560376] hci_port_configure en=1,config_cnt=1
<4>[ 27.560408] usb_passby en=1,passly=1
<4>[ 27.560425] [sw-ohci1]: sw_set_vbus cnt 2
<6>[ 27.560447] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
<6>[ 27.560525] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
<6>[ 27.560644] sw-ohci sw-ohci.1: irq 40, io mem 0xf1c14400
<6>[ 27.626814] hub 3-0:1.0: USB hub found
<6>[ 27.626857] hub 3-0:1.0: 1 port detected
<4>[ 27.628786] RTL871X: rtl8188eu driver version=v4.1.4_6773.20130222
<4>[ 27.639500] RTL871X: build time: Apr 23 2013 12:02:11
<6>[ 27.646524] usbcore: registered new interface driver rtl8188eu
<6>[ 27.780145] usb 2-1: new high speed USB device number 2 using sw-ehci
<4>[ 27.935367] RTL871X:
<4>[ 27.935377] usb_endpoint_descriptor(0):
<4>[ 27.935390] RTL871X: bLength=7
<4>[ 27.935396] RTL871X: bDescriptorType=5
<4>[ 27.935402] RTL871X: bEndpointAddress=81
<4>[ 27.935408] RTL871X: wMaxPacketSize=512
<4>[ 27.935414] RTL871X: bInterval=0
<4>[ 27.935420] RTL871X: RT_usb_endpoint_is_bulk_in = 1
<4>[ 27.935427] RTL871X:
<4>[ 27.935430] usb_endpoint_descriptor(1):
<4>[ 27.935438] RTL871X: bLength=7
<4>[ 27.935443] RTL871X: bDescriptorType=5
<4>[ 27.935449] RTL871X: bEndpointAddress=2
<4>[ 27.935455] RTL871X: wMaxPacketSize=512
<4>[ 27.935461] RTL871X: bInterval=0
<4>[ 27.935467] RTL871X: RT_usb_endpoint_is_bulk_out = 2
<4>[ 27.935474] RTL871X:
<4>[ 27.935477] usb_endpoint_descriptor(2):
<4>[ 27.935484] RTL871X: bLength=7
<4>[ 27.935489] RTL871X: bDescriptorType=5
<4>[ 27.935495] RTL871X: bEndpointAddress=3
<4>[ 27.935501] RTL871X: wMaxPacketSize=512
<4>[ 27.935507] RTL871X: bInterval=0
<4>[ 27.935513] RTL871X: RT_usb_endpoint_is_bulk_out = 3
<4>[ 27.935521] RTL871X: nr_endpoint=3, in_num=1, out_num=2
<4>[ 27.935526]
<4>[ 27.935531] RTL871X: USB_SPEED_HIGH
<4>[ 27.935593] RTL871X: CHIP TYPE: RTL8188E
<4>[ 27.935606] RTL871X: rtw_handle_dualmac(): pbuddy_padapter == NULL, Set pbuddy_padapter
<4>[ 27.935637] RTL871X: register rtw_netdev_ops to netdev_ops
<4>[ 27.935657] RTL871X: rtw_wdev_alloc(padapter=e0810000)
<4>[ 27.937717] RTL871X: Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
<4>[ 27.937739] RTL871X: RF_Type is 3!!
<4>[ 27.937751] RTL871X: _ConfigNormalChipOutEP_8188E OutEpQueueSel(0x05), OutEpNumber(2)
<4>[ 27.937873] RTL871X: EEPROM type is E-FUSE
<4>[ 27.937885] RTL871X: ====> _ReadAdapterInfo8188EU
<4>[ 27.938012] RTL871X: Boot from EFUSE, Autoload OK !
<4>[ 27.941752] bFWReady == _FALSE call reset 8051...
<4>[ 27.942119] RTL871X: =====> _8051Reset88E(): 8051 reset success .
<4>[ 27.969426] RTL871X: efuse_read_phymap_from_txpktbuf bcnhead:0
<4>[ 27.970510] RTL871X: efuse_read_phymap_from_txpktbuf len:225, lenbak:225, aaa:225, aaabak:225
<4>[ 27.990540] RTL871X: efuse_read_phymap_from_txpktbuf read count:223
<4>[ 27.991091] RTL871X: EEPROM ID=0x8129
<4>[ 27.991102] RTL871X: VID = 0x0BDA, PID = 0x8179
<4>[ 27.991110] RTL871X: Customer ID: 0x00, SubCustomer ID: 0xCD
<4>[ 27.991124] RTL871X: Hal_ReadPowerSavingMode88E...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(1)
<4>[ 27.991142] RTL871X: ### PS params=> power_mgnt(0),usbss_enable(0) ###
<4>[ 27.991156] RTL871X: ======= Path 0, Channel 0 =======
<4>[ 27.991164] RTL871X: Index24G_CCK_Base[0][0] = 0x2d
<4>[ 27.991202] RTL871X: Index24G_BW40_Base[0][0] = 0x2d
<4>[ 27.991211] RTL871X: ======= Path 0, Channel 1 =======
<4>[ 27.991220] RTL871X: Index24G_CCK_Base[0][1] = 0x2d
<4>[ 27.991228] RTL871X: Index24G_BW40_Base[0][1] = 0x2d
<4>[ 27.991235] RTL871X: ======= Path 0, Channel 2 =======
<4>[ 27.991243] RTL871X: Index24G_CCK_Base[0][2] = 0x2d
<4>[ 27.991256] RTL871X: Index24G_BW40_Base[0][2] = 0x2d
<4>[ 27.991263] RTL871X: ======= Path 0, Channel 3 =======
<4>[ 27.991271] RTL871X: Index24G_CCK_Base[0][3] = 0x2d
<4>[ 27.991279] RTL871X: Index24G_BW40_Base[0][3] = 0x2d
<4>[ 27.991286] RTL871X: ======= Path 0, Channel 4 =======
<4>[ 27.991294] RTL871X: Index24G_CCK_Base[0][4] = 0x2d
<4>[ 27.991317] RTL871X: Index24G_BW40_Base[0][4] = 0x2d
<4>[ 27.991324] RTL871X: ======= Path 0, Channel 5 =======
<4>[ 27.991332] RTL871X: Index24G_CCK_Base[0][5] = 0x2d
<4>[ 27.991340] RTL871X: Index24G_BW40_Base[0][5] = 0x2d
<4>[ 27.991347] RTL871X: ======= Path 0, Channel 6 =======
<4>[ 27.991355] RTL871X: Index24G_CCK_Base[0][6] = 0x2d
<4>[ 27.991362] RTL871X: Index24G_BW40_Base[0][6] = 0x2d
<4>[ 27.991369] RTL871X: ======= Path 0, Channel 7 =======
<4>[ 27.991377] RTL871X: Index24G_CCK_Base[0][7] = 0x2d
<4>[ 27.991385] RTL871X: Index24G_BW40_Base[0][7] = 0x2d
<4>[ 27.991392] RTL871X: ======= Path 0, Channel 8 =======
<4>[ 27.991400] RTL871X: Index24G_CCK_Base[0][8] = 0x2d
<4>[ 27.991408] RTL871X: Index24G_BW40_Base[0][8] = 0x2d
<4>[ 27.991415] RTL871X: ======= Path 0, Channel 9 =======
<4>[ 27.991423] RTL871X: Index24G_CCK_Base[0][9] = 0x2d
<4>[ 27.991430] RTL871X: Index24G_BW40_Base[0][9] = 0x2d
<4>[ 27.991438] RTL871X: ======= Path 0, Channel 10 =======
<4>[ 27.991446] RTL871X: Index24G_CCK_Base[0][10] = 0x2d
<4>[ 27.991453] RTL871X: Index24G_BW40_Base[0][10] = 0x2d
<4>[ 27.991461] RTL871X: ======= Path 0, Channel 11 =======
<4>[ 27.991468] RTL871X: Index24G_CCK_Base[0][11] = 0x2d
<4>[ 27.991476] RTL871X: Index24G_BW40_Base[0][11] = 0x2d
<4>[ 27.991483] RTL871X: ======= Path 0, Channel 12 =======
<4>[ 27.991491] RTL871X: Index24G_CCK_Base[0][12] = 0x2d
<4>[ 27.991500] RTL871X: Index24G_BW40_Base[0][12] = 0x2d
<4>[ 27.991507] RTL871X: ======= Path 0, Channel 13 =======
<4>[ 27.991515] RTL871X: Index24G_CCK_Base[0][13] = 0x2d
<4>[ 27.991523] RTL871X: Index24G_BW40_Base[0][13] = 0x2d
<4>[ 27.991530] RTL871X: ======= Path 0, Channel 14 =======
<4>[ 27.991538] RTL871X: Index24G_CCK_Base[0][14] = 0x2d
<4>[ 27.991546] RTL871X: Index24G_BW40_Base[0][14] = 0x2d
<4>[ 27.991553] RTL871X: ======= TxCount 0 =======
<4>[ 27.991560] RTL871X: CCK_24G_Diff[0][0]= 0
<4>[ 27.991567] RTL871X: OFDM_24G_Diff[0][0]= 2
<4>[ 27.991574] RTL871X: BW20_24G_Diff[0][0]= 0
<4>[ 27.991581] RTL871X: BW40_24G_Diff[0][0]= 0
<4>[ 27.991587] RTL871X: ======= TxCount 1 =======
<4>[ 27.991595] RTL871X: CCK_24G_Diff[0][1]= -2
<4>[ 27.991601] RTL871X: OFDM_24G_Diff[0][1]= -2
<4>[ 27.991608] RTL871X: BW20_24G_Diff[0][1]= -2
<4>[ 27.991615] RTL871X: BW40_24G_Diff[0][1]= -2
<4>[ 27.991622] RTL871X: ======= TxCount 2 =======
<4>[ 27.991629] RTL871X: CCK_24G_Diff[0][2]= -2
<4>[ 27.991636] RTL871X: OFDM_24G_Diff[0][2]= -2
<4>[ 27.991643] RTL871X: BW20_24G_Diff[0][2]= -2
<4>[ 27.991650] RTL871X: BW40_24G_Diff[0][2]= -2
<4>[ 27.991656] RTL871X: ======= TxCount 3 =======
<4>[ 27.991663] RTL871X: CCK_24G_Diff[0][3]= -2
<4>[ 27.991670] RTL871X: OFDM_24G_Diff[0][3]= -2
<4>[ 27.991677] RTL871X: BW20_24G_Diff[0][3]= -2
<4>[ 27.991684] RTL871X: BW40_24G_Diff[0][3]= -2
<4>[ 27.991691] RTL871X: EEPROMRegulatory = 0x0
<4>[ 27.991699] RTL871X: mlmepriv.ChannelPlan = 0x20
<4>[ 27.991708] RTL871X: CrystalCap: 0x20
<4>[ 27.991714] RTL871X: EEPROM Customer ID: 0x 0
<4>[ 27.991722] RTL871X: EEPROM : AntDivCfg = 0, TRxAntDivType = 3
<4>[ 27.991730] RTL871X: Board Type: 0x 0
<4>[ 27.991736] RTL871X: ThermalMeter = 0x1a
<4>[ 27.991743] RTL871X: <==== _ReadAdapterInfo8188EU in 60 ms
<4>[ 27.993070] RTL871X: rtw_register_early_suspend
<4>[ 27.993162] RTL871X:
<4>[ 27.993166] padapter->pwrctrlpriv.bSupportRemoteWakeup~~~~~~
<4>[ 27.993177] RTL871X:
<4>[ 27.993180] padapter->pwrctrlpriv.bSupportRemoteWakeup~~~[1]~~~
<4>[ 27.993200] RTL871X: rtw_macaddr_cfg MAC Address = 00:e0:4c:8a:3f:fd
<4>[ 27.993212] RTL871X: MAC Address from pnetdev->dev_addr= 00:e0:4c:8a:3f:fd
<4>[ 28.008930] RTL871X: bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0
<4>[ 28.009040] RTL871X: register rtw_netdev_ops to netdev_ops
<4>[ 28.009058] RTL871X: register rtw_netdev_if2_ops to netdev_ops
<4>[ 28.009144] RTL871X: rtw_wdev_alloc(padapter=e0861000)
<4>[ 28.010977] RTL871X: Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
<4>[ 28.010996] RTL871X: RF_Type is 3!!
<4>[ 28.011007] RTL871X: _ConfigNormalChipOutEP_8188E OutEpQueueSel(0x05), OutEpNumber(2)
<4>[ 28.012521] RTL871X: rtw_register_early_suspend
<4>[ 28.012579] RTL871X: MAC Address (if2) = 02:e0:4c:8a:3f:fd
<5>[ 28.339862] init: starting 'wpa_supplicant'
<6>[ 28.366105] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010'
<6>[ 28.449398] init: processing action 0x196dbe8 (property:sys.boot_completed=1)
<5>[ 28.449484] init: starting 'preinstall'
<6>[ 28.449857] init: command 'start' r=0
<5>[ 28.450871] init: starting 'systemc'
<6>[ 28.451265] init: command 'start' r=0
<3>[ 28.553395] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
<6>[ 28.557548] init: waitpid returned pid 628, status = 00000000
<5>[ 28.557577] init: process 'preinstall', pid 628 exited
<6>[ 28.573988] init: waitpid returned pid 255, status = 00000000
<5>[ 28.574017] init: process 'bootanim', pid 255 exited
<4>[ 28.616787] RTL871X: cfg80211_rtw_change_iface(wlan0) call netdev_open
<4>[ 28.616817] RTL871X: +871x_drv - drv_open, bup=0
<4>[ 28.621245] RTL871X: rtl8188e_FirmwareDownload: fw_ver=11 fw_subver=1 sig=0x88e1
<4>[ 28.678146] RTL871X: _FWFreeToGo: Checksum report OK! REG_MCUFWDL:0x00030004
<4>[ 28.678754] RTL871X: =====> _8051Reset88E(): 8051 reset success .
<4>[ 28.681737] RTL871X: _FWFreeToGo: Polling FW ready success!! REG_MCUFWDL:0x000300c6
<4>[ 28.853190] ==> rtl8188e_iol_efuse_patch
<4>[ 28.936503] RTL871X: pDM_Odm TxPowerTrackControl = 1
<4>[ 29.760658] RTL871X: rtl8188eu_hal_init in 1150ms
<4>[ 29.760696] RTL871X: MAC Address = 00:e0:4c:8a:3f:fd
<4>[ 29.781618] RTL871X: rtw_cfg80211_init_wiphy:rf_type=3
<4>[ 29.781644] RTL871X: +871x_drv - if2_open, bup=0
<4>[ 29.781741] RTL871X: rtw_hal_inirp_init HalFunc.inirp_init is NULL!!!
<4>[ 29.781838] RTL871X: rtw_cfg80211_init_wiphy:rf_type=3
<4>[ 29.781850] RTL871X: -871x_drv - if2_open, bup=1
<4>[ 29.781857] RTL871X: -871x_drv - drv_open, bup=1
<4>[ 29.781873] RTL871X: cfg80211_rtw_change_iface(wlan0) old_iftype=6, new_iftype=2
<4>[ 29.782417] RTL871X: +871x_drv - drv_open, bup=1
<4>[ 29.782432] RTL871X: -871x_drv - drv_open, bup=1
<4>[ 29.782536] RTL871X: cfg80211_rtw_set_power_mgmt(wlan0) enabled:0, timeout:-1
<6>[ 29.782712] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>[ 29.783693] RTL871X: cfg80211_rtw_flush_pmksa(wlan0)
<4>[ 29.793791] RTL871X: hw_var_set_opmode()-3362 mode = 2
<4>[ 29.827759] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 29.827931] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 29.828004] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 29.861551] RTL871X: rtw_android_priv_cmd: Android private cmd "WFD-SET-TCPPORT = 554" on wlan0
<4>[ 29.864298] RTL871X: Unknown PRIVATE command WFD-SET-TCPPORT = 554 - ignored
<4>[ 29.864408] RTL871X: rtw_android_priv_cmd: Android private cmd "WFD-SET-MAXTPUT = 300" on wlan0
<4>[ 29.864425] RTL871X: Unknown PRIVATE command WFD-SET-MAXTPUT = 300 - ignored
<4>[ 29.864452] RTL871X: rtw_android_priv_cmd: Android private cmd "WFD-SET-DEVTYPE = 1" on wlan0
<4>[ 29.864466] RTL871X: Unknown PRIVATE command WFD-SET-DEVTYPE = 1 - ignored
<4>[ 29.891404] RTL871X: no packet in tx packet buffer (0)
<4>[ 29.947306] RTL871X: rtw_android_priv_cmd: Android private cmd "BTCOEXSCAN-STOP" on wlan0
<4>[ 29.949141] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-STOP" on wlan0
<4>[ 29.953948] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-ADD 3" on wlan0
<4>[ 29.954243] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-START" on wlan0
<4>[ 29.954522] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-STOP" on wlan0
<4>[ 29.955143] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-REMOVE 2" on wlan0
<4>[ 29.955708] RTL871X: rtw_android_priv_cmd: Android private cmd "RXFILTER-START" on wlan0
<4>[ 29.956043] RTL871X: cfg80211_rtw_set_power_mgmt(wlan0) enabled:1, timeout:-1
<4>[ 29.971383] RTL871X: rtw_android_priv_cmd: Android private cmd "SETBAND 0" on wlan0
<4>[ 29.974498] RTL871X: rtw_android_priv_cmd: Android private cmd "SCAN-ACTIVE" on wlan0
<4>[ 29.978458] RTL871X: rtw_android_priv_cmd: Android private cmd "SCAN-PASSIVE" on wlan0
<6>[ 30.048844] init: waitpid returned pid 622, status = 00000000
<3>[ 30.048872] init: untracked pid 622 exited
<4>[ 30.829201] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 31.215654] RTL871X: survey done event(1e)
<4>[ 31.217254] RTL871X: =>cfg80211_rtw_connect(wlan0)
<4>[ 31.217277] RTL871X: privacy=1, key= (null), key_len=0, key_idx=0
<4>[ 31.217294] RTL871X: ssid=hans741nd, len=9
<4>[ 31.217303] RTL871X: bssid=e8:94:f6:6f:24:5e
<4>[ 31.217312] RTL871X: matched by bssid
<4>[ 31.217322] RTL871X: rtw_cfg80211_set_wpa_version, wpa_version=2
<4>[ 31.217330] RTL871X: rtw_cfg80211_set_auth_type, nl80211_auth_type=0
<4>[ 31.217339] RTL871X: cfg80211_rtw_connect, ie_len=70
<4>[ 31.217348] RTL871X: set wpa_ie(length:70):
<4>[ 31.217358] RTL871X: 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
<4>[ 31.217369] RTL871X: 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
<4>[ 31.217379] RTL871X: 0x00 0x0f 0xac 0x02 0x00 0x00 0xdd 0x2e
<4>[ 31.217389] RTL871X: 0x50 0x6f 0x9a 0x09 0x02 0x02 0x00 0x23
<4>[ 31.217399] RTL871X: 0x00 0x0d 0x22 0x00 0x00 0xe0 0x4c 0x8a
<4>[ 31.217408] RTL871X: 0x3f 0xfd 0x01 0x88 0x00 0x0a 0x00 0x50
<4>[ 31.217418] RTL871X: 0xf2 0x04 0x00 0x05 0x00 0x10 0x11 0x00
<4>[ 31.217428] RTL871X: 0x0d 0x6e 0x75 0x63 0x6c 0x65 0x61 0x72
<4>[ 31.217439] RTL871X: 0x5f 0x6b 0x66 0x30 0x32 0x36 0x00 0x00
<4>[ 31.217453] RTL871X: got wpa2_ie, wpa2_ielen:20
<4>[ 31.217468] RTL871X: rtw_cfg80211_set_cipher, ucast=1, cipher=0xfac04
<4>[ 31.217479] RTL871X: rtw_cfg80211_set_cipher, ucast=0, cipher=0xfac04
<4>[ 31.217488] RTL871X: rtw_cfg80211_set_key_mgt, key_mgt=0xfac02
<4>[ 31.217514] RTL871X: set ssid [hans741nd] fw_state=0x00000008
<4>[ 31.217522] RTL871X: Set SSID under fw_state=0x00000008
<4>[ 31.217541] RTL871X: [by_bssid:0][assoc_ssid:hans741nd][to_roaming:0] new candidate: hans741nd(e8:94:f6:6f:24:5e) rssi:-56
<4>[ 31.217558] RTL871X: rtw_select_and_join_from_scanned_queue: candidate: hans741nd(e8:94:f6:6f:24:5e, ch:5)
<4>[ 31.217594] RTL871X: Capture EPIGRAM_OUI
<4>[ 31.217601] RTL871X: Capture EPIGRAM_OUI
<4>[ 31.217607] RTL871X: link to Artheros AP
<4>[ 31.217615] RTL871X: rtw_joinbss_cmd: smart_ps=2
<4>[ 31.217630] RTL871X: set ssid:dot11AuthAlgrthm=2, dot11PrivacyAlgrthm=4, dot118021XGrpPrivacy=4
<4>[ 31.217640] RTL871X: <=cfg80211_rtw_connect, ret 0
<4>[ 31.217775] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 31.217853] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 31.217937] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 31.222611] RTL871X: set ch/bw before connected
<4>[ 31.229661] RTL871X: update_mgnt_tx_rate(): rate = 2
<4>[ 31.294255] RTL871X: Capture EPIGRAM_OUI
<4>[ 31.294269] RTL871X: Capture EPIGRAM_OUI
<4>[ 31.294277] RTL871X: link to Artheros AP
<4>[ 31.294289] RTL871X: issue_deauth to e8:94:f6:6f:24:5e
<4>[ 31.294337] RTL871X: start auth
<4>[ 31.294353] RTL871X: issue_auth
<4>[ 31.590073] RTL871X: link_timer_hdl: auth timeout and try again
<4>[ 31.590117] RTL871X: issue_auth
<4>[ 31.890079] RTL871X: link_timer_hdl: auth timeout and try again
<4>[ 31.890127] RTL871X: issue_auth
<4>[ 32.190094] RTL871X: link_timer_hdl: auth timeout and try again
<4>[ 32.190144] RTL871X: issue_auth
<4>[ 32.490035] RTL871X: link_timer_hdl: auth timeout and try again
<4>[ 32.490073] RTL871X: issue_auth
<4>[ 32.504812] RTL871X: OnAuthClient
<4>[ 32.504824] RTL871X: auth success, start assoc
<4>[ 32.504849] RTL871X: network.SupportedRates[0]=82
<4>[ 32.504857] RTL871X: network.SupportedRates[1]=84
<4>[ 32.504864] RTL871X: network.SupportedRates[2]=8B
<4>[ 32.504872] RTL871X: network.SupportedRates[3]=96
<4>[ 32.504879] RTL871X: network.SupportedRates[4]=0C
<4>[ 32.504886] RTL871X: network.SupportedRates[5]=12
<4>[ 32.504893] RTL871X: network.SupportedRates[6]=18
<4>[ 32.504900] RTL871X: network.SupportedRates[7]=24
<4>[ 32.504907] RTL871X: network.SupportedRates[8]=30
<4>[ 32.504914] RTL871X: network.SupportedRates[9]=48
<4>[ 32.504921] RTL871X: network.SupportedRates[10]=60
<4>[ 32.504928] RTL871X: network.SupportedRates[11]=6C
<4>[ 32.504937] RTL871X: bssrate_len = 12
<4>[ 32.800031] RTL871X: link_timer_hdl: assoc timeout and try again
<4>[ 32.800067] RTL871X: network.SupportedRates[0]=82
<4>[ 32.800075] RTL871X: network.SupportedRates[1]=84
<4>[ 32.800083] RTL871X: network.SupportedRates[2]=8B
<4>[ 32.800091] RTL871X: network.SupportedRates[3]=96
<4>[ 32.800111] RTL871X: network.SupportedRates[4]=0C
<4>[ 32.800120] RTL871X: network.SupportedRates[5]=12
<4>[ 32.800127] RTL871X: network.SupportedRates[6]=18
<4>[ 32.800134] RTL871X: network.SupportedRates[7]=24
<4>[ 32.800141] RTL871X: network.SupportedRates[8]=30
<4>[ 32.800149] RTL871X: network.SupportedRates[9]=48
<4>[ 32.800156] RTL871X: network.SupportedRates[10]=60
<4>[ 32.800163] RTL871X: network.SupportedRates[11]=6C
<4>[ 32.800172] RTL871X: bssrate_len = 12
<4>[ 33.100086] RTL871X: link_timer_hdl: assoc timeout and try again
<4>[ 33.100136] RTL871X: network.SupportedRates[0]=82
<4>[ 33.100147] RTL871X: network.SupportedRates[1]=84
<4>[ 33.100155] RTL871X: network.SupportedRates[2]=8B
<4>[ 33.100162] RTL871X: network.SupportedRates[3]=96
<4>[ 33.100169] RTL871X: network.SupportedRates[4]=0C
<4>[ 33.100177] RTL871X: network.SupportedRates[5]=12
<4>[ 33.100184] RTL871X: network.SupportedRates[6]=18
<4>[ 33.100191] RTL871X: network.SupportedRates[7]=24
<4>[ 33.100199] RTL871X: network.SupportedRates[8]=30
<4>[ 33.100206] RTL871X: network.SupportedRates[9]=48
<4>[ 33.100213] RTL871X: network.SupportedRates[10]=60
<4>[ 33.100220] RTL871X: network.SupportedRates[11]=6C
<4>[ 33.100229] RTL871X: bssrate_len = 12
<4>[ 33.400032] RTL871X: link_timer_hdl: assoc timeout and try again
<4>[ 33.400082] RTL871X: network.SupportedRates[0]=82
<4>[ 33.400091] RTL871X: network.SupportedRates[1]=84
<4>[ 33.400098] RTL871X: network.SupportedRates[2]=8B
<4>[ 33.400105] RTL871X: network.SupportedRates[3]=96
<4>[ 33.400114] RTL871X: network.SupportedRates[4]=0C
<4>[ 33.400121] RTL871X: network.SupportedRates[5]=12
<4>[ 33.400128] RTL871X: network.SupportedRates[6]=18
<4>[ 33.400135] RTL871X: network.SupportedRates[7]=24
<4>[ 33.400142] RTL871X: network.SupportedRates[8]=30
<4>[ 33.400149] RTL871X: network.SupportedRates[9]=48
<4>[ 33.400156] RTL871X: network.SupportedRates[10]=60
<4>[ 33.400163] RTL871X: network.SupportedRates[11]=6C
<4>[ 33.400172] RTL871X: bssrate_len = 12
<4>[ 33.700036] RTL871X: link_timer_hdl: assoc timeout and try again
<4>[ 33.700073] RTL871X: network.SupportedRates[0]=82
<4>[ 33.700082] RTL871X: network.SupportedRates[1]=84
<4>[ 33.700089] RTL871X: network.SupportedRates[2]=8B
<4>[ 33.700096] RTL871X: network.SupportedRates[3]=96
<4>[ 33.700104] RTL871X: network.SupportedRates[4]=0C
<4>[ 33.700111] RTL871X: network.SupportedRates[5]=12
<4>[ 33.700118] RTL871X: network.SupportedRates[6]=18
<4>[ 33.700125] RTL871X: network.SupportedRates[7]=24
<4>[ 33.700131] RTL871X: network.SupportedRates[8]=30
<4>[ 33.700139] RTL871X: network.SupportedRates[9]=48
<4>[ 33.700146] RTL871X: network.SupportedRates[10]=60
<4>[ 33.700153] RTL871X: network.SupportedRates[11]=6C
<4>[ 33.700161] RTL871X: bssrate_len = 12
<4>[ 33.714216] RTL871X: OnAssocRsp
<4>[ 33.714245] RTL871X: report_join_res(3)
<4>[ 33.714257] RTL871X: rtw_joinbss_update_network
<4>[ 33.714271] RTL871X: +rtw_update_ht_cap()
<4>[ 33.714293] RTL871X: rtw_joinbss_update_stainfo
<4>[ 33.714301] RTL871X: ### Set STA_(0) info
<4>[ 33.714319] RTL871X: rtw_cfg80211_indicate_connect(padapter=e0810000)
<4>[ 33.714341] RTL871X: pwdev->sme_state(b)=1
<4>[ 33.714361] RTL871X: pwdev->sme_state(a)=1
<4>[ 33.714369] RTL871X: assoc success
<6>[ 33.714644] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>[ 33.714926] RTL871X: HW_VAR_BASIC_RATE: BrateCfg(0x15f)
<4>[ 33.715604] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 33.715701] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 33.715767] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 33.720664] RTL871X: OnAssocRsp
<4>[ 33.728964] RTL871X: WMM(0): 0, a42b
<4>[ 33.729177] RTL871X: WMM(1): 0, a44f
<4>[ 33.729295] RTL871X: WMM(2): 0, 5e4322
<4>[ 33.729418] RTL871X: WMM(3): 0, 2f3222
<4>[ 33.729428] RTL871X: wmm_para_seq(0): 0
<4>[ 33.729436] RTL871X: wmm_para_seq(1): 1
<4>[ 33.729442] RTL871X: wmm_para_seq(2): 2
<4>[ 33.729449] RTL871X: wmm_para_seq(3): 3
<4>[ 33.729459] RTL871X: HTOnAssocRsp
<4>[ 33.736304] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4>[ 33.736315] ==> rssi_level:0, rate_bitmap:0x000ff015
<4>[ 33.736340] RTL871X: ### MacID(0),Set Max Tx RPT MID(1)
<4>[ 33.736576] RTL871X: ### rtl8188e_set_FwMediaStatus_cmd: MStatus=1 MACID=0
<4>[ 33.738300] RTL871X: rtl8188e_set_FwJoinBssReport_cmd mstatus(1)
<4>[ 33.739415] RTL871X: SetFwRsvdPagePkt
<4>[ 33.739485] RTL871X: SetFwRsvdPagePkt: Set RSVD page location to Fw
<4>[ 33.740676] RTL871X: rtl8188e_set_FwJoinBssReport_cmd: 1 Download RSVD success! DLBcnCount:1, poll:1
<4>[ 33.741410] RTL871X: Set RSVD page location to Fw.
<4>[ 33.741539] RTL871X: =>mlmeext_joinbss_event_callback
<4>[ 33.815814] RTL871X: Drop duplicate management frame with seq_num = 2.
<4>[ 33.820201] RTL871X: Drop duplicate management frame with seq_num = 2.
<4>[ 33.835823] RTL871X: issue_probereq_ex(wlan0) to e8:94:f6:6f:24:5e, ch:5, 3/3 in 50 ms
<4>[ 33.901562] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4>[ 33.901568] ==> rssi_level:2, rate_bitmap:0x000ff000
<4>[ 37.789385] RTL871X: Group handshake still in progress !!!
<4>[ 39.780612] RTL871X: Group handshake still in progress !!!
<4>[ 41.780626] RTL871X: Group handshake still in progress !!!
<4>[ 43.717074] RTL871X: cfg80211_rtw_disconnect(wlan0)
<4>[ 43.780511] RTL871X: Group handshake still in progress !!!
<4>[ 44.054516] RTL871X: update_mgnt_tx_rate(): rate = 2
<4>[ 44.054537] RTL871X: HW_VAR_BASIC_RATE: BrateCfg(0x15f)
<4>[ 44.059876] RTL871X: cfg80211_rtw_disconnect...call rtw_indicate_disconnect
<4>[ 44.059904] RTL871X: rtw_cfg80211_indicate_disconnect(padapter=e0810000)
<4>[ 44.059953] RTL871X: ### Clean STA_(0) info
<4>[ 44.059994] RTL871X: cfg80211_rtw_del_key(wlan0) key_index=0
<4>[ 44.060004] RTL871X: cfg80211_rtw_del_key(wlan0) key_index=1
<4>[ 44.060049] RTL871X: cfg80211_rtw_del_key(wlan0) key_index=2
<4>[ 44.060058] RTL871X: cfg80211_rtw_del_key(wlan0) key_index=3
<4>[ 44.060066] RTL871X: cfg80211_rtw_del_key(wlan0) key_index=4
<4>[ 44.060074] RTL871X: cfg80211_rtw_del_key(wlan0) key_index=5
<4>[ 44.060473] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 44.060570] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 44.060640] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 44.060705] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 44.060824] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 44.061239] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 44.061306] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 44.061369] RTL871X: cfg80211_rtw_change_station(wlan0)
<6>[ 44.061769] cfg80211: Calling CRDA for country: RU
<4>[ 44.061916] RTL871X: rtl8188e_set_FwJoinBssReport_cmd mstatus(0)
<7>[ 44.100039] wlan0: no IPv6 routers present
<4>[ 45.061693] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 45.063260] RTL871X: no packet in tx packet buffer (0)
<4>[ 46.062995] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 46.390157] RTL871X: survey done event(14)
<4>[ 46.396736] RTL871X: =>cfg80211_rtw_connect(wlan0)
<4>[ 46.396767] RTL871X: privacy=1, key= (null), key_len=0, key_idx=0
<4>[ 46.396786] RTL871X: ssid=hans741nd, len=9
<4>[ 46.396795] RTL871X: bssid=e8:94:f6:6f:24:5e
<4>[ 46.396804] RTL871X: matched by bssid
<4>[ 46.396815] RTL871X: rtw_cfg80211_set_wpa_version, wpa_version=2
<4>[ 46.396824] RTL871X: rtw_cfg80211_set_auth_type, nl80211_auth_type=0
<4>[ 46.396833] RTL871X: cfg80211_rtw_connect, ie_len=70
<4>[ 46.396842] RTL871X: set wpa_ie(length:70):
<4>[ 46.396852] RTL871X: 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
<4>[ 46.396861] RTL871X: 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
<4>[ 46.396871] RTL871X: 0x00 0x0f 0xac 0x02 0x00 0x00 0xdd 0x2e
<4>[ 46.396884] RTL871X: 0x50 0x6f 0x9a 0x09 0x02 0x02 0x00 0x23
<4>[ 46.396894] RTL871X: 0x00 0x0d 0x22 0x00 0x00 0xe0 0x4c 0x8a
<4>[ 46.396903] RTL871X: 0x3f 0xfd 0x01 0x88 0x00 0x0a 0x00 0x50
<4>[ 46.396913] RTL871X: 0xf2 0x04 0x00 0x05 0x00 0x10 0x11 0x00
<4>[ 46.396923] RTL871X: 0x0d 0x6e 0x75 0x63 0x6c 0x65 0x61 0x72
<4>[ 46.396933] RTL871X: 0x5f 0x6b 0x66 0x30 0x32 0x36 0x00 0x00
<4>[ 46.396950] RTL871X: got wpa2_ie, wpa2_ielen:20
<4>[ 46.396966] RTL871X: rtw_cfg80211_set_cipher, ucast=1, cipher=0xfac04
<4>[ 46.396977] RTL871X: rtw_cfg80211_set_cipher, ucast=0, cipher=0xfac04
<4>[ 46.396986] RTL871X: rtw_cfg80211_set_key_mgt, key_mgt=0xfac02
<4>[ 46.397010] RTL871X: set ssid [hans741nd] fw_state=0x00000008
<4>[ 46.397021] RTL871X: Set SSID under fw_state=0x00000008
<4>[ 46.397040] RTL871X: [by_bssid:0][assoc_ssid:hans741nd][to_roaming:0] new candidate: hans741nd(e8:94:f6:6f:24:5e) rssi:-55
<4>[ 46.397057] RTL871X: rtw_select_and_join_from_scanned_queue: candidate: hans741nd(e8:94:f6:6f:24:5e, ch:5)
<4>[ 46.397095] RTL871X: Capture EPIGRAM_OUI
<4>[ 46.397102] RTL871X: Capture EPIGRAM_OUI
<4>[ 46.397109] RTL871X: link to Artheros AP
<4>[ 46.397117] RTL871X: rtw_joinbss_cmd: smart_ps=2
<4>[ 46.397132] RTL871X: set ssid:dot11AuthAlgrthm=2, dot11PrivacyAlgrthm=4, dot118021XGrpPrivacy=4
<4>[ 46.397142] RTL871X: <=cfg80211_rtw_connect, ret 0
<4>[ 46.397290] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 46.397371] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 46.397436] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 46.399953] RTL871X: set ch/bw before connected
<4>[ 46.406675] RTL871X: update_mgnt_tx_rate(): rate = 2
<4>[ 46.448029] RTL871X: Capture EPIGRAM_OUI
<4>[ 46.448053] RTL871X: Capture EPIGRAM_OUI
<4>[ 46.448062] RTL871X: link to Artheros AP
<4>[ 46.448077] RTL871X: issue_deauth to e8:94:f6:6f:24:5e
<4>[ 46.448130] RTL871X: start auth
<4>[ 46.448146] RTL871X: issue_auth
<4>[ 46.459328] RTL871X: OnAuthClient
<4>[ 46.459383] RTL871X: auth success, start assoc
<4>[ 46.459447] RTL871X: network.SupportedRates[0]=82
<4>[ 46.459457] RTL871X: network.SupportedRates[1]=84
<4>[ 46.459464] RTL871X: network.SupportedRates[2]=8B
<4>[ 46.459473] RTL871X: network.SupportedRates[3]=96
<4>[ 46.459481] RTL871X: network.SupportedRates[4]=0C
<4>[ 46.459488] RTL871X: network.SupportedRates[5]=12
<4>[ 46.459499] RTL871X: network.SupportedRates[6]=18
<4>[ 46.459507] RTL871X: network.SupportedRates[7]=24
<4>[ 46.459514] RTL871X: network.SupportedRates[8]=30
<4>[ 46.459521] RTL871X: network.SupportedRates[9]=48
<4>[ 46.459528] RTL871X: network.SupportedRates[10]=60
<4>[ 46.459536] RTL871X: network.SupportedRates[11]=6C
<4>[ 46.459546] RTL871X: bssrate_len = 12
<4>[ 46.466358] RTL871X: OnAssocRsp
<4>[ 46.466406] RTL871X: report_join_res(3)
<4>[ 46.466418] RTL871X: rtw_joinbss_update_network
<4>[ 46.466433] RTL871X: +rtw_update_ht_cap()
<4>[ 46.466456] RTL871X: rtw_joinbss_update_stainfo
<4>[ 46.466465] RTL871X: ### Set STA_(0) info
<4>[ 46.466484] RTL871X: rtw_cfg80211_indicate_connect(padapter=e0810000)
<4>[ 46.466494] RTL871X: pwdev->sme_state(b)=1
<4>[ 46.466522] RTL871X: pwdev->sme_state(a)=1
<4>[ 46.466530] RTL871X: assoc success
<4>[ 46.466688] RTL871X: HW_VAR_BASIC_RATE: BrateCfg(0x15f)
<4>[ 46.467446] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 46.467549] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 46.467615] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 46.487392] RTL871X: WMM(0): 0, a42b
<4>[ 46.487546] RTL871X: WMM(1): 0, a44f
<4>[ 46.487644] RTL871X: WMM(2): 0, 5e4322
<4>[ 46.487701] RTL871X: send eapol packet
<4>[ 46.487826] RTL871X: WMM(3): 0, 2f3222
<4>[ 46.487836] RTL871X: wmm_para_seq(0): 0
<4>[ 46.487843] RTL871X: wmm_para_seq(1): 1
<4>[ 46.487849] RTL871X: wmm_para_seq(2): 2
<4>[ 46.487856] RTL871X: wmm_para_seq(3): 3
<4>[ 46.487892] RTL871X: HTOnAssocRsp
<4>[ 46.488671] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4>[ 46.488679] ==> rssi_level:0, rate_bitmap:0x000ff015
<4>[ 46.488699] RTL871X: ### MacID(0),Set Max Tx RPT MID(1)
<4>[ 46.488906] RTL871X: ### rtl8188e_set_FwMediaStatus_cmd: MStatus=1 MACID=0
<4>[ 46.491064] RTL871X: rtl8188e_set_FwJoinBssReport_cmd mstatus(1)
<4>[ 46.492655] RTL871X: SetFwRsvdPagePkt
<4>[ 46.492732] RTL871X: SetFwRsvdPagePkt: Set RSVD page location to Fw
<4>[ 46.493131] RTL871X: send eapol packet
<4>[ 46.493490] RTL871X: cfg80211_rtw_add_key(wlan0) adding key for e8:94:f6:6f:24:5e
<4>[ 46.493595] RTL871X: cipher=0xfac04
<4>[ 46.493603] RTL871X: key_len=0x10
<4>[ 46.493609] RTL871X: seq_len=0x6
<4>[ 46.493615] RTL871X: key_index=0
<4>[ 46.493620] RTL871X: pairwise=1
<4>[ 46.493795] RTL871X: rtw_cfg80211_set_encryption
<4>[ 46.493809] RTL871X: rtw_cfg80211_set_encryption, : param->u.crypt.set_tx ==1
<4>[ 46.493818] RTL871X: ~~~~set sta key:unicastkey
<4>[ 46.493832] RTL871X: rtw_cfg80211_set_encryption, ret=0
<4>[ 46.494041] RTL871X: cfg80211_rtw_set_default_key(wlan0) key_index=0, unicast=1, multicast=0.
<4>[ 46.494281] RTL871X: rtl8188e_set_FwJoinBssReport_cmd: 1 Download RSVD success! DLBcnCount:1, poll:1
<4>[ 46.498235] RTL871X: cfg80211_rtw_add_key(wlan0) adding key for (null)
<4>[ 46.498294] RTL871X: Set RSVD page location to Fw.
<4>[ 46.498453] RTL871X: =>mlmeext_joinbss_event_callback
<4>[ 46.498488] RTL871X: set pairwise key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) camid:4
<4>[ 46.498591] RTL871X: cipher=0xfac04
<4>[ 46.498599] RTL871X: key_len=0x10
<4>[ 46.498606] RTL871X: seq_len=0x6
<4>[ 46.498611] RTL871X: key_index=1
<4>[ 46.498617] RTL871X: pairwise=0
<4>[ 46.498627] RTL871X: rtw_cfg80211_set_encryption
<4>[ 46.498638] RTL871X: ~~~~set sta key:groupkey
<4>[ 46.498648] RTL871X: ==> rtw_set_key algorithm(4),keyid(1),key_mask(2)
<4>[ 46.498662] RTL871X: rtw_cfg80211_set_encryption, ret=0
<4>[ 46.515151] RTL871X: set group key to hw: alg:4(WEP40-1 WEP104-5 TKIP-2 AES-4) keyid:1
<4>[ 46.526337] RTL871X: cfg80211_rtw_change_station(wlan0)
<4>[ 46.559776] RTL871X: rtw_android_priv_cmd: Android private cmd "BTCOEXMODE 1" on wlan0
<4>[ 46.562350] RTL871X: cfg80211_rtw_set_power_mgmt(wlan0) enabled:0, timeout:-1
<5>[ 46.571290] init: starting 'dhcpcd_wlan0'
<4>[ 47.785072] UpdateHalRAMask8188EUsb => mac_id:0, networkType:0x0b, mask:0x000fffff
<4>[ 47.785082] ==> rssi_level:2, rate_bitmap:0x000ff000
<4>[ 50.110189] RTL871X: OnAction_back
<4>[ 50.110213] RTL871X: OnAction_back, action=0
<4>[ 50.110225] RTL871X: issue_action_BA, category=3, action=1, status=0
<4>[ 50.379976] RTL871X: cfg80211_rtw_set_power_mgmt(wlan0) enabled:1, timeout:-1
<4>[ 50.380875] RTL871X: rtw_android_priv_cmd: Android private cmd "BTCOEXMODE 2" on wlan0
<4>[ 55.897459] PHY_PageRead : too much ecc err,bank 0 block 19f,page 2
<6>[ 63.965167] init: waitpid returned pid 1096, status = 00000000
<3>[ 63.965197] init: untracked pid 1096 exited
<6>[ 68.538298] init: waitpid returned pid 1143, status = 00000000
<3>[ 68.538325] init: untracked pid 1143 exited
<4>[ 117.025191] PHY_PageRead : too much ecc err,bank 0 block 19f,page 2
u0_a54@android:/ #
