Добрый день!
У меня, судя по данным из TechKnow ToolKit, PID7_8198C.
Установил JellyMetroDS. Но WiFi почти не работает (на uberoid все нормально):отключается каждые две секунды. Пробовал ввести команду через терминал - не помогло.
HowTo Flash:
1. Run the Analyzer before you flash your tablet. Copy the included APK to a SD card and install the application on your tablet.
2. The Analyzer will show you the model info, it will also dump a file called model.txt on your SD (make sure you insert a SD when running to write it!)
3. Lookup the displayed/saved model in the "Uberoid Compatibility List" which you can find in this document.
4. Open FirmwareInstall\config in Windows Explorer
5. Remove the "+" marked .FWC file at the top of this directory
6. Look for the FWC file with your model name, prefix this filename with a "+"
(E11D_F_4ddr_512M.fwc to +E11D_F_4ddr_512M.fwc)
NOTE: Only one "+" prefixed file is allowed in this directory or the firmware will not start flashing!
For example +PuZhi_MID10.1_W10A_8235_FT5406.fwc
7. Copy this ROM to your SD using the CHANGER, flash and ENJOY JELLYBEAN!
Может быть, я не объяснил это хорошо, я попросил заводской прошивки Android 4.0.3, потому что я включил планшет разбился на старте со словом Android JB ранее установленной. Я установил прошивку, как вы описали, как только вы закончили установку я получаю сообщение, вы можете удалить Micro SD, я выключаю таблетку. Я начинать микро SD с JB4.1.1 release3.1 включить планшет, но я не установить часть, где я делаю ошибку.
Open the directory 10 inch laptop PID10_8199 firmware\FirmwareInstall\config
Delete +PID10_8199.fwc an copy to 10 inch laptop PID10_8199 firmware\FirmwareInstall\config this file PuZhi_MID10.1_W10A_8235_FT5406.fwc
Rename PuZhi_MID10.1_W10A_8235_FT5406.fwc to +PuZhi_MID10.1_W10A_8235_FT5406.fwc
Format your SD card SD Formatter (for download this tool press the button I Accept) and copy folder FirmwareInstall and file wmt_scriptcmd to root of your SD card.
Insert your SD card to Tablet PC and then Power on your Tablet PC.