Добрый день!
У меня, судя по данным из TechKnow ToolKit, PID7_8198C.
Установил JellyMetroDS. Но WiFi почти не работает (на uberoid все нормально):отключается каждые две секунды. Пробовал ввести команду через терминал - не помогло.
franco, what do you mean about stock rom?
You can find your config's files at the directory \FirmwareInstall\config of Uberoid firmware.
Прошивка устройств на процессоре VIA WM8850
Добавлено: 29.08.2014 22:46
franco
Blaze вы очень добры, и я ценю это, я не эксперт вы можете сказать мне, шаг за шагом, как приступить
Прошивка устройств на процессоре VIA WM8850
Добавлено: 30.08.2014 11:09
Blaze
HowTo Flash:
1. Run the Analyzer before you flash your tablet. Copy the included APK to a SD card and install the application on your tablet.
2. The Analyzer will show you the model info, it will also dump a file called model.txt on your SD (make sure you insert a SD when running to write it!)
3. Lookup the displayed/saved model in the "Uberoid Compatibility List" which you can find in this document.
4. Open FirmwareInstall\config in Windows Explorer
5. Remove the "+" marked .FWC file at the top of this directory
6. Look for the FWC file with your model name, prefix this filename with a "+"
(E11D_F_4ddr_512M.fwc to +E11D_F_4ddr_512M.fwc)
NOTE: Only one "+" prefixed file is allowed in this directory or the firmware will not start flashing!
For example +PuZhi_MID10.1_W10A_8235_FT5406.fwc
7. Copy this ROM to your SD using the CHANGER, flash and ENJOY JELLYBEAN!
Прошивка устройств на процессоре VIA WM8850
Добавлено: 30.08.2014 15:33
franco
Может быть, я не объяснил это хорошо, я попросил заводской прошивки Android 4.0.3, потому что я включил планшет разбился на старте со словом Android JB ранее установленной. Я установил прошивку, как вы описали, как только вы закончили установку я получаю сообщение, вы можете удалить Micro SD, я выключаю таблетку. Я начинать микро SD с JB4.1.1 release3.1 включить планшет, но я не установить часть, где я делаю ошибку.
Прошивка устройств на процессоре VIA WM8850
Добавлено: 30.08.2014 21:51
Blaze
franco, please, write in English, because you're Russian does not correct.
Прошивка устройств на процессоре VIA WM8850
Добавлено: 30.08.2014 23:18
franco
Maybe I have not explained it well, I asked the factory firmware Android 4.0.3, because
I have the tablet blocatto startup, when I turn it hangs with the sritta Android JB4.1.1
installed about a year ago, and everything after that sucess or moved the file (vendor)
after
various attempts have not riusito to unlock it, tried reset tried volume + and power
pressed together to make restoration and more. I installatoil firmware that I have
described
in the post, put micro SD in the tablet, quado appearance and the word now you can remove
sd
I turn off the tablet insert new sd with JB 4.1.1 but no program is installed, where do I
Open the directory 10 inch laptop PID10_8199 firmware\FirmwareInstall\config
Delete +PID10_8199.fwc an copy to 10 inch laptop PID10_8199 firmware\FirmwareInstall\config this file PuZhi_MID10.1_W10A_8235_FT5406.fwc
Rename PuZhi_MID10.1_W10A_8235_FT5406.fwc to +PuZhi_MID10.1_W10A_8235_FT5406.fwc
Format your SD card SD Formatter (for download this tool press the button I Accept) and copy folder FirmwareInstall and file wmt_scriptcmd to root of your SD card.
Insert your SD card to Tablet PC and then Power on your Tablet PC.