Страница 14 из 434

Re: Прошивка устройств на процессоре VIA WM8650

Добавлено: 29.10.2011 21:04
athlets
День добрый. Помогите кто нибудь купил планшет Tablet PC 7" inch Android 2.2 TouchScreen Cam WIFI 3G зеленый диод, черный вход наушников, вибро есть, мультитач не знаю. вот ссылка del/itm/220856902900?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_4691wt_1139. Пробовал все прошивки на некоторых зависали во время загрузки. На других (7,8,13) не работает тачскин. Пробовал "Меняем на: setenv touchcodec uor615x Строку: setenv wmt.io.touch 1:vt1603:2:800:480 Меняем на:
setenv wmt.io.touch 1:uor615x:0:800:4807 Либо наоборот.
Открываем файл: FirmwareInstall/packages/fs_patch/root_patch/system/default.prop Ищем: ro.wmt.touchpannel=0 Меняем на: ro.wmt.touchpannel=1" не помогает. Загружал планшет с этих прошивок звука нет, тач не работает калибровал usb мышкой не помогает пишет calibration failed. Уже замучился. Если у кого такая проблема посоветуйте что делать. Фото как у melissa тока на коробке надпись irobot. Заранее благодарен.

Изображение Изображение Изображение

Re: Прошивка устройств на процессоре VIA WM8650

Добавлено: 30.10.2011 7:08
crazymouse
Добрый вечер, crazymouse.
На стандартной китайской прошивке gsm модуль работал?
да работал, на главном экране показывал оператора, так же была возможность звонить и отправлять sms, так что это всетаки скорее всего телефон. Могу Вам выложить ссылку на этот планшет с описанием на каком нибудь интернет магазине, так же выложить свои фото планшета и его внутренностей.

Re: Прошивка устройств на процессоре VIA WM8650

Добавлено: 30.10.2011 10:56
alexssl
Blaze, спасибо, как всегда помогли! :beer:

Re: Прошивка устройств на процессоре VIA WM8650

Добавлено: 30.10.2011 13:50
Blaze
На зарубежном форуме нашел интересную информацию по моделям wm8650
Eken Models (or equivalent):

M003S: This is a 8" tablet with a 800Mhz processor, 256MB of RAM, and 2GB of internal storage or ROM. It has Android 2.2.
LED color: Blue
Audio port color: Black
Vibrates? No
Two point touch: No
Use option 3 in the changer.bat file of the Hybrid ROM
You can find a full datasheet here:
http://www.ekengroup.com/m003s/

M008S: This is a 9.7" tablet with a 800Mhz processor, 256MB of RAM, and 2GB of internal storage or ROM. It has Android 2.2.
LED color: Blue
Audio port color: Black
Vibrates? No
Two point touch: No
THIS ROM DOES NOT SUPPORT THE M008S
You can find a full datasheet here:
http://www.ekengroup.com/m008s/

M008K: This is a 9.7" tablet with a 800Mhz processor, 256MB of RAM, and 2GB of internal storage or ROM. It has Android 2.2.
LED color: Blue
Audio port color: Black
Vibrates? No
Two point touch: No
THIS ROM DOES NOT SUPPORT THE M008K
You can find a full datasheet here:
http://www.ekengroup.com/m008k/

M009s (Blue LED): This is a 7" tablet with a 800Mhz processor, 256MB of RAM, and 2GB of internal storage or ROM. It has Android 2.2.
LED color: Blue
Audio port color: Green or Black
Vibrates? No
Two point touch: No
Use option 2 in the changer.bat file of the Hybrid ROM
You can find a full datasheet here:
http://www.ekengroup.com/m009s/

M009s (Green LED): This is a 7" tablet with a 800Mhz processor, 256MB of RAM, and 2GB of internal storage or ROM. It has Android 2.2.
LED color: Green
Audio port color: Black
Vibrates? Yes
Two point touch: Yes
Use option 1 in the changer.bat file of the Hybrid ROM
You can find a full datasheet here:
http://www.ekengroup.com/m009s/

M010S: This is a 7" tablet with a 800Mhz processor, 256MB of RAM, and 2GB of internal storage or ROM. It has Android 2.2.
LED color: Blue
Audio port color: Black
Vibrates? No
Two point touch: No
Use option 9 in the changer.bat file of the Hybrid ROM
You can find a full datasheet here: http://www.ekengroup.com/m010s/

M012S: This is a 8" tablet with a 800Mhz processor, 256MB of RAM, and 2GB of internal storage or ROM. It has Android 2.2.
LED color: Blue
Audio port color: No Color
Vibrates? No
Two point touch: No
M012S also comes in 2 flavors - one has 1 face button, other has three face buttons.
Use option 10 in the changer.bat file of the Hybrid ROM
You can find a full datasheet here:
http://www.ekengroup.com/m012s/
Eken Factory Firmware is here: http://www.ekengroup.com/support/


Other 7" Models:

Maylong M-250: This is a 7" tablet with a 800Mhz processor, 256MB of RAM, and 2GB of internal storage or ROM. It has Android 2.2.
LED color: Green
Audio port color: Black
Vibrates? Yes
Two point touch: Yes
Use option 1 in the changer.bat file of the Hybrid ROM
You can find the specs here: http://www.maylonggroup.com/M-250_MID.htm

Intertoys NL or Fview: This is a 7" tablet with a 800Mhz processor, 256MB of RAM, and 2GB of internal storage or ROM. It has Android 2.2.
LED color: Green
Audio port color: Black
Vibrates? Yes
Two point touch: Yes
Use option 1 in the changer.bat file of the Hybrid ROM
You can find the specs here:
http://www.efirstview.com/en/html/product.asp?id=422

MID703: This is a 7" tablet with a 800Mhz processor, 256MB of RAM, and 4GB of internal storage or ROM. It has Android 2.2.
LED color: Green
Audio port color: Black
Vibrates? yes
Two point touch: Yes
Use option 8 in the changer.bat file of the Hybrid ROM
You can find the specs here: http://kldelectronics.en.made-in-china. ... D703-.html

M70007T: This is a 7" tablet with a 800Mhz processor, 256MB of RAM, and 2GB of internal storage or ROM. It has Android 2.2.
LED color: Green
Audio port color: Black
Vibrates? Yes
Two point touch: Yes
Use option 11 in the changer.bat file of the Hybrid ROM
You can find the specs here:
http://www.made-in-china.com/showroom/s ... -MID-.html
Factory Firmware: http://www.sendspace.com/file/bkspzi

MID E18: This is a 7" tablet with a 800Mhz processor, 256MB of RAM, and 2GB of internal storage or ROM. It has Android 2.2.
LED color: Green
Audio port color: Black
Vibrates? Yes
Two point touch: Yes
Use option 1 in the changer.bat file of the Hybrid ROM
You can find the specs here:
http://www.easydy.com/mid-e18.html

TOMTEC: This is a 7" tablet with a 800Mhz processor, 256MB of RAM, and 2GB of internal storage or ROM. It has Android 2.2.
LED color: Green
Audio port color: Black
Vibrates? Yes
Two point touch: Yes
Use option 1 or 12 in the changer.bat file of the Hybrid ROM

There have several different 7 inch Tomtec models. The early ones sold in Apr/May 2011 work with options 1 and 12 of the Hybrid ROM. The more recent models DO NOT work with options 1 and 12, but do work woth option 8.
BLY-706F V1: This is a 7" tablet with a 800Mhz processor, 256MB of RAM, and 2GB of internal storage or ROM. It has Android 2.2.
LED color: Green
Audio port color: Black
Vibrates? No
Two point touch: Yes
Use option 7 in the changer.bat file of the Hybrid ROM
You can find the specs here: http://www.aliexpress.com/snapshot/101148204.html

BLY-706 V3: This is a 7" tablet with a 800Mhz processor, 256MB of RAM, and 2GB of internal storage or ROM. It has Android 2.2.
LED color: Green
Audio port color: Black
Vibrates? No
Two point touch: Yes
Use option 13 in the changer.bat file of the Hybrid ROM
You can find the specs here: http://www.aliexpress.com/snapshot/101148204.html

ViaPad M7 - Version 1: This is a 7" tablet with a 800Mhz processor, 256MB of RAM, and 2GB of internal storage or ROM. It has Android 2.2.
LED color: Green
Audio port color: Black
Vibrates? Yes
Two point touch: Yes
Use option 11 in the changer.bat file of the Hybrid ROM
You can find the specs here: http://www.alibaba.com/product-gs/45312 ... t_VIA.html

ViaPad M7 - Version 2: This is a 7" tablet with a 800Mhz processor, 512MB of RAM, and 8GB of internal storage or ROM. It has Android 2.1.
LED color:
Audio port color:
Vibrates?
Two point touch: No
Use option 11 in the changer.bat file of the Hybrid ROM
You can find the specs here: http://www.cydle.com/product_M7.aspx

ATF3416-7: This is a 7" tablet with a 800Mhz processor, 256MB of RAM, and 2GB of internal storage or ROM. It has Android 2.2.
LED color: Green
Audio port color: Black
Vibrates? Yes
Two point touch: Yes
Use option 12 in the changer.bat file of the Hybrid ROM

ILC Bought from Kijkshop: This is a 7" Tablet with a 800Mhz processor, 256MB of RAM, and 4GB of internal storage or ROM. It has Android 2.2.
LED color: Green
Audio port color: Black
Vibrates? Yes
Two point touch: Yes
Looks similar to M009S, Intertoys Fview, but has different hardware
Use option 8 in the changer.bat file of the Hybrid ROM

KLD-MID701: This is a 7" Tablet with a 800Mhz processor, 256MB of RAM, and 4GB of internal storage or ROM. It has Android 2.2.
LED color: Green
Audio port color: Black
Vibrates? Yes
Two point touch: Yes
Use option 8 in the changer.bat file of the Hybrid ROM

BLACK "W0702 V80" KT EPAD (available black and silver)
This is a 7" tablet with a 800Mhz processor, 256MB of RAM, and 2GB of internal storage or ROM. It has Android 2.2.

LED color:green
Audio port color:black
Vibrates:yes
Two point touch:yes

Android 2.2
Kernel version-2.6.32.9-default
Build number-1.5.1-20110708.115253
works with option 7


SILVER "WMS8125B" EKEN M009S (available black and silver)

This is a 7" tablet with a 800Mhz processor, 256MB of RAM, and 2GB of internal storage or ROM. It has Android 2.2.

LED color:green
Audio port color:black
Vibrates:no
Two point touch:yes

Android 2.2
Kernel version-2.6.32.9-default
Build number-1.3.0-20110418.022309
works with option 7


Other 8" Models:

VIA WM8650 8": This is a 8" tablet with a 800Mhz processor, 256MB of RAM, and 2GB of internal storage or ROM. It has Android 2.2.
LED color: Blue
Audio port color: Black
Vibrates? No
Two point touch: No
Use option 5 in the changer.bat file of the Hybrid ROM
You can find the specs here:

M80003W: This is a 8" tablet with a 800Mhz processor, 256MB of RAM, and 2GB of internal storage or ROM. It has Android 2.2.
LED color: Green
Audio port color: Black
Vibrates? Yes
Two point touch: No
Use option 6 in the changer.bat file of the Hybrid ROM
You can find the specs here: http://www.amazon.com/M80003W-Touchscre ... B004VBA5NG

PC-802: This is a 8" tablet with a 800Mhz processor, 256MB of RAM, and 2GB of internal storage or ROM. It has Android 2.2.
LED color: Green
Audio port color: Black
Vibrates? No
Two point touch:
Use option 4 in the changer.bat file of the Hybrid ROM
You can find the specs here: http://daruibo.en.alibaba.com/product/4 ... C_802.html
athlets, можно попробовать номер 11 в прошивке Uberoid.

crazymouse, как я понял, у Вас этот планшет:
Newest Phone Tablet Epad B06 7 inch Google Android 2.2 WM8650 800MHz 256MB 2GB 10.1 Flash Wifi Phone Call Tablet PC
Модель вашего планшета: B06.

В Uberoid она не заявлена. Оригинальную прошивку для модели B06 я не нашел.
Можно узнать под каким номером в Uberoid прошиваете свой планшет?

alexssl, рад помочь :)

Re: Прошивка устройств на процессоре VIA WM8650

Добавлено: 30.10.2011 14:07
crazymouse
Уберойд точно ставилась прошивка под номером 7, так же на нем заводилась, если не ошибаюсь 5 и 11

Re: Прошивка устройств на процессоре VIA WM8650

Добавлено: 30.10.2011 14:53
athlets
Пробовал прошивку Uberoid номер 11 зависает на надписи UBEROID. Как быть?

Re: Прошивка устройств на процессоре VIA WM8650

Добавлено: 30.10.2011 14:59
crazymouse
athlets писал(а):Пробовал прошивку Uberoid номер 11 зависает на надписи UBEROID. Как быть?
попробовать прошивку под другим номером, я так много переберал

Re: Прошивка устройств на процессоре VIA WM8650

Добавлено: 30.10.2011 15:05
Blaze
crazymouse писал(а):попробовать прошивку под другим номером, я так много переберал
делать только на свой страх и риск. А так подсказка верная.

athlets, возможно у вас планшет модели типа iRobot Flytouch Tablet PC, но не факт. Лучше с Uberoid поэкспериментировать - подобрав нужный номер.
А так, прошивки (ROM) для iRobot Flytouch Tablet PC можно найти здесь (требуется регистрация)
Посмотрите там прошивки (в разделе ROMs)

Изображение
Изображение
FlyTouch (iRobot) (Green LED) (WMT2.1_88)


Изображение
Изображение
FlyTouch (MID) (Green LED) (VIB) (WMT2.1.2)

Re: Прошивка устройств на процессоре VIA WM8650

Добавлено: 30.10.2011 15:19
RebbeJacob
Добрый день.
Недавно приобрел планшет 7" как будто бы EKEN m009s( Green Led, разъем наушников черный),

прошился прошивкой с офф - сайта и... перестал работать тач - пад и звук, с мышкой работает,

ставил прошивки отсюда, эффект тот же, если выбираю вариант 1 не грузится висит на надписи,

вариант 2 и 11 работает но опять же без тач пада и звука, пытался править файл env_boot, пока

что безрезультатно, заметил вот что, если в файле env_boot поменять строку


setenv wmt.audio.i2s vt1603:f1:f2:ff:ff:100

на то что советуют
вот например на это
setenv wmt.audio.i2s wm8900:ff:ff:ff:ff

то девайс просто висит на надписи ( на загрузке)

если менять
Найти строку: setenv touchcodec vt1603
Заменить на: setenv touchcodec uor615x
Найти строку: setenv wmt.io.touch 1:vt1603:2:800:480
Заменить на: setenv wmt.io.touch 1:uor615x:0:800:480

никакого эффекта

помогите разобраться, фото разобранного девайса прилагаю

Изображение Изображение Изображение

Изображение Изображение Изображение

Изображение Изображение Изображение

Изображение Изображение


P.S. есть второй такой же планшет непрошитый, рабочий звук и тач, как бы снять с него дамп

прошивки, поясните подробно, или как и где глянуть на рабочем какие драйвера на тач и звук

стоят.

Re: Прошивка устройств на процессоре VIA WM8650

Добавлено: 30.10.2011 17:26
Blaze
Добрый день RebbeJacob.
Спасибо за детально представленную информацию о вашем планшете.
Да, у вас модель EKEN M009s версии v16 (на самой плате написана модель).
Попробуйте номер 30
  • аудио будет работать

    Код: Выделить всё

    setenv wmt.audio.i2s vt1603:f1:f2:f1:f1:100
  • тач (сенсор) увы работать не будет. Попробуйте USB мышкой откалибровать.
Вот тесты прошивки Uberoid от пользователя bonehenge, у которого такой же планшет как ваш

Код: Выделить всё

32 = boot ok / no ts
31 = boot ok / no ts
30 = boot ok / no ts
29 = boot ok / no ts
28 = boot ok / no ts
27 = boot ok / no ts
26 = boot ok / no ts
25 = boot ok / no ts
24 = NA 10"
23 = boot ok / no ts
22 = NA 10"
21 = boot ok / no ts
20 = boot ok / no ts
19 = NA 10"
18 = NA 10"
17 = NA 8"
16 = boot ok / no ts
15 = NA 8"
14 = NA 4"
13 = boot ok / no ts
12 = boot failure
11 = boot failure
10 = NA 8"
09 = boot ok / no ts
08 = boot ok / no ts
07 = boot ok / no ts
06 = NA 8"
05 = NA 8"
04 = NA 8"
03 = NA 8"
02 = boot ok / no ts
01 = boot failure
данная информация получена из этого источника
есть второй такой же планшет непрошитый, рабочий звук и тач, как бы снять с него дамп прошивки, поясните подробно, или как и где глянуть на рабочем какие драйвера на тач и звук стоят.
Попробуйте сделать дамп с рабочего планшета.
С помощью его можно получить интересующую информацию.
Внимание. Как дамп (резервную копию) полученые файлы нельзя использовать.
wmt_scriptcmd.rar
  • Извлечь из архива скрипт wmt_scriptcmd и скопировать его в корень SD карты.
  • Включить планшет и подождать когда отработает скрипт (в этот момент, на экране, может ничего не отобразиться).
  • На SD карте появятся файлы ENV.BIN, U-BOOT.BIN и WLOAD.BIN
  • Откройте их блокнотом Notepad++ (скачайте и установите файл Notepad++ vx.x.x.x Installer) и попробуйте найти необходимую информацию