Прошивка планшетов на AllWinner A10 и A13

[Blaze]

12valves, thanks for your report.
BTW, A13_98VB_M901C.20130801.7z

[dolphin724]

Добрый день, помгите пож-та с прошивкой.
Планшет 7" на плате название jy-mid-a10-2#cdpcb-tsf-v0.2
Процессор А10
WiFi Realtek rtl8188ctv
Озу 512 Мб
Камера 1
тач ft5306de4
матрица 800х600

[Blaze]

Здравствуйте, dolphin724.
Случайно это SoftwinerEvb 8 не Ваш планшет?

[dolphin724]

Случайно это SoftwinerEvb 8 не Ваш планшет?

к сожалению нет, пробывал этот дамп не подходит, у меня 7"

[kucheberiya]

Здравствуйте. Помогите пожалуйста расшифровать лог Terminal Emulator for Android.
Планшет Sosoon X10
A13, 9"
На плате: bcl-a13-98v-b a2.0
Первый раз завис на заставке сделал Hard Reset программой wipe_rom easy a10 - a13.
Установил игры программы через некоторое время включаю грузиться а там нечего нет как после Hard Reset, устанавливаю все по новой через некоторое время опять пусто. Это проблема в железе? Или прошивка поможет?

app_44@android:/ $ dmesg
<6>[ 0.000000] Initializing cgroup subsys cpuset
<5>[ 0.000000] Linux version 3.0.8+ (bnd_hxj@bnd) (gcc version
4.5.1 (Sourcery G++ Lite 2010.09-50) ) #374 PREEMPT Mon Jul 8 11:57:01
CST 2013
<4>[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7),
cr=10c5387f
<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing
instruction cache
<4>[ 0.000000] Machine: sun5i
<6>[ 0.000000] Total Detected Memory: 512MB with 2 banks
<6>[ 0.000000] Memory Reserved(in bytes):
<6>[ 0.000000] LCD: 0x48000000, 0x01000000
<6>[ 0.000000] SYS: 0x43000000, 0x00010000
<6>[ 0.000000] VE : 0x44000000, 0x04000000
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[ 0.000000] On node 0 totalpages: 114688
<7>[ 0.000000] free_area_init_node: node 0, pgdat c08e13f4,
node_mem_map c0a9c000
<7>[ 0.000000] Normal zone: 1024 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 113664 pages, LIFO batch:31
<7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[ 0.000000] pcpu-alloc: [0] 0
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping
on. Total pages: 113664
<5>[ 0.000000] Kernel command line: console=ttyS0,115200 rw
init=/init loglevel=5
<6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6,
262144 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] Memory: 144MB 304MB = 448MB total
<5>[ 0.000000] Memory: 361304k/361304k available, 97448k reserved, 0K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
<5>[ 0.000000] vmalloc : 0xe0800000 - 0xf0000000 ( 248 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .init : 0xc0008000 - 0xc0032000 ( 168 kB)
<5>[ 0.000000] .text : 0xc0032000 - 0xc07ef350 (7925 kB)
<5>[ 0.000000] .data : 0xc07f0000 - 0xc08e8488 ( 994 kB)
<5>[ 0.000000] .bss : 0xc08e84ac - 0xc0a9bcb8 (1743 kB)
<6>[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3,
MinObjects=0, CPUs=1, Nodes=1
<6>[ 0.000000] NR_IRQS:96 nr_irqs:96 96
<6>[ 0.000000] timer0: Periodic Mode
<4>[ 0.000000] sw_timer_init,line:372
<6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns,
wraps every 178956ms
<4>[ 0.000000] aw_clksrc_init, line:339
<6>[ 0.000000] Console: colour dummy device 80x30
<3>[ 0.000000] ram_console: buffer (null), invalid size 0,
datasize 4294967284
<6>[ 0.000119] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
<6>[ 0.040020] pid_max: default: 32768 minimum: 301
<6>[ 0.040146] Mount-cache hash table entries: 512
<6>[ 0.040467] Initializing cgroup subsys cpuacct
<6>[ 0.040489] Initializing cgroup subsys devices
<6>[ 0.040499] Initializing cgroup subsys freezer
<6>[ 0.040508] Initializing cgroup subsys blkio
<6>[ 0.040578] CPU: Testing write buffer coherency: ok
<6>[ 0.040786] hw perfevents: enabled with ARMv7 Cortex-A8 PMU
driver, 5 counters available
<6>[ 0.041303] devtmpfs: initialized
<6>[ 0.042546] print_constraints: dummy:
<6>[ 0.042704] NET: Registered protocol family 16
<6>[ 0.043221] hw-breakpoint: debug architecture 0x4 unsupported.
<4>[ 0.043655] try to parse apb frequency from script faild!
<4>[ 0.043680] [ccmu] PLL4 clock rate should not be set!
<4>[ 0.043692] [ccmu] try to set ve_pll rate to 2400000000 failed!
<4>[ 0.043700] [ccmu] PLL4 clock rate should not be set!
<4>[ 0.043708] [ccmu] ID is invalid when get module clock information!
<4>[ 0.043769] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
<6>[ 0.043833] Initialize DMAC OK
<6>[ 0.048077] bio: create slab <bio-0> at 0
<5>[ 0.048647] SCSI subsystem initialized
<6>[ 0.048856] usbcore: registered new interface driver usbfs
<6>[ 0.048922] usbcore: registered new interface driver hub
<6>[ 0.049059] usbcore: registered new device driver usb
<6>[ 0.049470] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[ 0.050000] cfg80211: Calling CRDA to update world regulatory domain
<4>[ 0.050000] Init eGon pin module V2.0
<6>[ 0.050000] Switching to clocksource aw 64bits couter
<5>[ 0.050000] FS-Cache: Loaded
<6>[ 0.050000] CacheFiles: Loaded
<6>[ 0.050000] Switched to NOHz mode on CPU #0
<4>[ 0.050000] [usb_manager]: CONFIG_USB_SW_SUN5I_USB0_OTG
<4>[ 0.050000] [sw_hcd0]: usb host driver initialize........
<4>[ 0.050000] [sw_hcd0]: open_usb_clock
<4>[ 0.065448] [sw_hcd0]: host_init_state = 0
<4>[ 0.065456] [sw_hcd0]: platform is usb host
<4>[ 0.065521] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB
Host mode controller at f1c13000 using PIO, IRQ 38
<6>[ 0.065545] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
<6>[ 0.065562] sw_hcd_host0 sw_hcd_host0: new USB bus registered,
assigned bus number 1
<6>[ 0.066074] hub 1-0:1.0: USB hub found
<6>[ 0.066101] hub 1-0:1.0: 1 port detected
<4>[ 0.066128] wrn: hcd is not enable, need not start hcd
<4>[ 0.066311] [sw_hcd0]: sw_usb_host0_disable start
<4>[ 0.066322] -------sw_hcd0_soft_disconnect---------
<4>[ 0.066333] [sw_hcd_host0]: Set USB Power OFF
<4>[ 0.066343] wrn: hcd is not enable, need not stop hcd
<4>[ 0.066373] [sw_hcd0]: close_usb_clock
<4>[ 0.066412] [sw_hcd0]: sw_usb_host0_disable end
<4>[ 0.066450] [sw_udc]: udc_init: version 20080411
<6>[ 0.066786] NET: Registered protocol family 2
<6>[ 0.066902] IP route cache hash table entries: 4096 (order: 2,
16384 bytes)
<6>[ 0.067165] TCP established hash table entries: 16384 (order: 5,
131072 bytes)
<6>[ 0.067391] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.067523] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 0.067533] TCP reno registered
<6>[ 0.067543] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.067563] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.067709] NET: Registered protocol family 1
<6>[ 0.068040] RPC: Registered named UNIX socket transport module.
<6>[ 0.068052] RPC: Registered udp transport module.
<6>[ 0.068059] RPC: Registered tcp transport module.
<6>[ 0.068067] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[ 0.068236] Trying to unpack rootfs image as initramfs...
<6>[ 0.112620] Freeing initrd memory: 568K
<4>[ 0.112744] [pm]aw_pm_init!
<6>[ 0.112757] standby_mode = 0.
<3>[ 0.112763] aw_pm_init: not support super standby.
<6>[ 0.112970] audit: initializing netlink socket (disabled)
<5>[ 0.113017] type=2000 audit(0.109:1): initialized
<6>[ 0.123112] ashmem: initialized
<5>[ 0.128970] VFS: Disk quotas dquot_6.5.2
<4>[ 0.129143] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>[ 0.132150] NTFS driver 2.1.30 [Flags: R/W].
<6>[ 0.132459] fuse init (API version 7.16)
<6>[ 0.133029] msgmni has been set to 706
<6>[ 0.137496] alg: No test for stdrng (krng)
<6>[ 0.137768] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
<6>[ 0.137788] io scheduler noop registered
<6>[ 0.137796] io scheduler deadline registered
<6>[ 0.137886] io scheduler cfq registered (default)
<6>[ 0.138533] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[ 0.140430] brd: module loaded
<6>[ 0.142196] loop: module loaded
<4>[ 0.142534] drivers/spi/spi_sunxi.c(L2114) sw spi init fetch
spi0 uning configuration failed
<4>[ 0.142560] drivers/spi/spi_sunxi.c(L2005) Get spi devices number failed
<4>[ 0.142570] drivers/spi/spi_sunxi.c(L2124) register spi devices
board info failed
<4>[ 0.142581] cannot find any using configuration for all spi controllers!
<6>[ 0.142603] PPP generic driver version 2.4.2
<6>[ 0.142785] PPP Deflate Compression module registered
<6>[ 0.142796] PPP BSD Compression module registered
<6>[ 0.143822] PPP MPPE Compression module registered
<6>[ 0.143837] NET: Registered protocol family 24
<6>[ 0.143885] PPTP driver version 0.8.5
<6>[ 0.144238] tun: Universal TUN/TAP device driver, 1.6
<6>[ 0.144247] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[ 0.144542] usbcore: registered new interface driver cdc_ether
<6>[ 0.144592] usbcore: registered new interface driver cdc_eem
<6>[ 0.144634] usbcore: registered new interface driver cdc_subset
<6>[ 0.144683] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 0.144744] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 0.144843] usbcore: registered new interface driver cdc_acm
<6>[ 0.144854] cdc_acm: USB Abstract Control Model driver for USB
modems and ISDN adapters
<6>[ 0.144863] Initializing USB Mass Storage driver...
<6>[ 0.144958] usbcore: registered new interface driver usb-storage
<6>[ 0.144967] USB Mass Storage support registered.
<6>[ 0.145020] usbcore: registered new interface driver ums-alauda
<6>[ 0.145066] usbcore: registered new interface driver ums-cypress
<6>[ 0.145109] usbcore: registered new interface driver ums-datafab
<6>[ 0.145153] usbcore: registered new interface driver ums_eneub6250
<6>[ 0.145194] usbcore: registered new interface driver ums-freecom
<6>[ 0.145237] usbcore: registered new interface driver ums-isd200
<6>[ 0.145286] usbcore: registered new interface driver ums-jumpshot
<6>[ 0.145328] usbcore: registered new interface driver ums-karma
<6>[ 0.145372] usbcore: registered new interface driver ums-onetouch
<6>[ 0.145427] usbcore: registered new interface driver ums-realtek
<6>[ 0.145471] usbcore: registered new interface driver ums-sddr09
<6>[ 0.145518] usbcore: registered new interface driver ums-sddr55
<6>[ 0.145564] usbcore: registered new interface driver ums-usbat
<6>[ 0.145695] usbcore: registered new interface driver usbserial
<6>[ 0.145738] USB Serial support registered for generic
<6>[ 0.145789] usbcore: registered new interface driver usbserial_generic
<6>[ 0.145798] usbserial: USB Serial Driver core
<6>[ 0.145839] USB Serial support registered for GSM modem (1-port)
<6>[ 0.145969] usbcore: registered new interface driver option
<6>[ 0.145977] option: v0.7.2:USB Driver for GSM modems
<4>[ 0.146011] ------print_msc_config-----
<4>[ 0.146019] vendor_id = 0x18d1
<4>[ 0.146025] mass_storage_id = 0x1
<4>[ 0.146031] adb_id = 0x2
<4>[ 0.146040] usb_manufacturer_name = USB Developer
<4>[ 0.146047] usb_product_name = Android
<4>[ 0.146053] usb_serial_number = 20080411
<4>[ 0.146060] msc_vendor_name = USB 2.0
<4>[ 0.146066] msc_product_name = USB Flash Driver
<4>[ 0.146074] msc_release = 100
<4>[ 0.146080] luns = 2
<4>[ 0.146086] ---------------------------
<4>[ 0.146233] [sw_udc]: [sw_usb_udc]: binding gadget driver 'android_usb'
<4>[ 0.146250] [sw_udc]: alloc request: ep(0xc08cafb8, ep0, 64),
req(0xdf022a00)
<4>[ 0.146267] WRN:L2694(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR:
usb device is not active
<4>[ 0.146280] [sw_udc]: sw_udc_pullup, is_on = 0
<4>[ 0.146291] WRN:L2729(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR:
usb device is not active
<6>[ 0.147487] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 0.147505] android_usb gadget: Number of LUNs=2
<6>[ 0.147515] lun0: LUN: removable file: (no medium)
<6>[ 0.147523] lun1: LUN: removable file: (no medium)
<4>[ 0.147533] lun name: lun
<4>[ 0.147546] lun name: lun1
<4>[ 0.147705] WRN:L2694(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR:
usb device is not active
<6>[ 0.147729] android_usb gadget: android_usb ready
<6>[ 0.147878] mousedev: PS/2 mouse device common for all mice
<6>[ 0.148153] input: sw-keyboard as /devices/virtual/input/input0
<4>[ 0.148274] ==register_early_suspend =
<6>[ 0.148692] i2c /dev entries driver
<4>[ 0.148821] !!! base_Addr = 0xe08eac00
<4>[ 0.148846] config i2c gpio with gpio_config api
<4>[ 0.148902] twi0, apb clock = 24000000
<6>[ 0.150906] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected
<4>[ 0.151899] rtc_detect,line:197
<6>[ 0.151910] I2C: i2c-0: AW16XX I2C adapter
<4>[ 0.151917] **********start************
<4>[ 0.151923] 0x40
<4>[ 0.151928] 0xf8
<4>[ 0.151933] 0x28
<4>[ 0.151938] 0x0
<4>[ 0.151942] 0x0
<4>[ 0.151947] **********end************
<4>[ 0.151995] !!! base_Addr = 0xe08ec000
<4>[ 0.152048] twi1, apb clock = 24000000
<6>[ 0.152258] rtc_detect: Detected chip pcf8563 at adapter 1, address 0x51
<6>[ 0.152340] pcf8563 1-0051: chip found, driver version 0.4.3
<4>[ 0.156058] rtc (null): alarm rollover not handled
<6>[ 0.156268] using rtc device, pcf8563, for alarms
<6>[ 0.156306] pcf8563 1-0051: rtc core: registered pcf8563 as rtc0
<6>[ 0.158834] I2C: i2c-1: AW16XX I2C adapter
<4>[ 0.158842] **********start************
<4>[ 0.158849] 0x40
<4>[ 0.158854] 0xf8
<4>[ 0.158859] 0x58
<4>[ 0.158863] 0x0
<4>[ 0.158868] 0x0
<4>[ 0.158872] **********end************
<4>[ 0.158912] !!! base_Addr = 0xe08ee400
<4>[ 0.158961] twi2, apb clock = 24000000
<4>[ 0.159149] rtc_detect,line:197
<6>[ 0.159157] I2C: i2c-2: AW16XX I2C adapter
<4>[ 0.159163] **********start************
<4>[ 0.159169] 0x40
<4>[ 0.159174] 0xf8
<4>[ 0.159179] 0x58
<4>[ 0.159183] 0x0
<4>[ 0.159188] 0x0
<4>[ 0.159192] **********end************
<6>[ 0.159347] lirc_dev: IR Remote Control driver registered, major 250
<6>[ 0.159360] IR NEC protocol handler initialized
<6>[ 0.159367] IR RC5(x) protocol handler initialized
<6>[ 0.159374] IR RC6 protocol handler initialized
<6>[ 0.159380] IR JVC protocol handler initialized
<6>[ 0.159387] IR Sony protocol handler initialized
<6>[ 0.159394] IR RC5 (streamzap) protocol handler initialized
<6>[ 0.159401] IR LIRC bridge handler initialized
<6>[ 0.159408] Linux video capture interface: v2.00
<4>[ 0.159439] [pa_drv] start!!!
<4>[ 0.159714] [pa_drv] init end!!!
<6>[ 0.159825] print_constraints: axp20_ldo1: 1300 mV
<6>[ 0.160901] print_constraints: axp20_ldo2: 1800 <--> 3300 mV at 3000 mV
<6>[ 0.161839] print_constraints: axp20_ldo3: 700 <--> 3500 mV at 3300 mV
<6>[ 0.162761] print_constraints: axp20_ldo4: 1250 <--> 3300 mV at 3300 mV
<6>[ 0.163660] print_constraints: axp20_buck2: 700 <--> 2275 mV at 1400 mV
<6>[ 0.164556] print_constraints: axp20_buck3: 700 <--> 3500 mV at 1200 mV
<6>[ 0.164965] print_constraints: axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV
<6>[ 0.165229] input: axp20-supplyer as
/devices/platform/sun5i-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1
<4>[ 0.172558] pmu_pekoff_time = 6000
<4>[ 0.172568] pmu_pekoff_en = 1
<4>[ 0.172573] pmu_peklong_time = 1500
<4>[ 0.172579] pmu_pekon_time = 1000
<4>[ 0.172585] pmu_pwrok_time = 64
<4>[ 0.172591] pmu_pwrnoe_time = 2000
<4>[ 0.172597] pmu_intotp_en = 1
<4>[ 0.173071] [AXP]POWER20_OFF_CTL:2017-->0x42
<4>[ 0.173543] POWER20_PEK_SET:2034-->0x9d
<4>[ 0.174015] POWER20_PEK_SET:2045-->0x9d
<4>[ 0.174486] POWER20_PEK_SET:2054-->0x9d
<4>[ 0.174956] POWER20_PEK_SET:2065-->0x9d
<4>[ 0.175426] POWER20_PEK_SET:2077-->0x9d
<4>[ 0.175898] POWER20_HOTOVER_CTL:2086-->0x2d
<4>[ 0.179839] [AXP]last_rest_vol = 68, now_rest_vol = 64
<4>[ 0.181366] [AXP]Cur_CoulombCounter = -114
<4>[ 0.181375] [AXP]charger->rest_vol = 68
<6>[ 0.184146] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02)
initialised: dm-devel@redhat.com
<6>[ 0.184587] device-mapper: multipath: version 1.3.0 loaded
<6>[ 0.184603] device-mapper: multipath round-robin: version 1.0.0 loaded
<6>[ 0.184613] device-mapper: multipath queue-length: version 0.1.0 loaded
<6>[ 0.184622] device-mapper: multipath service-time: version 0.2.0 loaded
<4>[ 0.185122] [mmc_pm]: no sdio card used in configuration
<4>[ 0.185132] [mmc]: sunximmc_init
<4>[ 0.185245] [mmc]: sunxi mmc controller using config : 0x1
<4>[ 0.185307] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
<4>[ 0.185626] [mmc]: mmc 0 power off !!
<4>[ 0.185716] [mmc]: mmc0 Probe: base:0xe08f0000 irq:32 dma:0
pdes:0xdf058000, ret 0.
<6>[ 0.186374] usbcore: registered new interface driver usbhid
<6>[ 0.186384] usbhid: USB HID core driver
<6>[ 0.186839] logger: created 256K log 'log_main'
<6>[ 0.186918] logger: created 256K log 'log_events'
<6>[ 0.186994] logger: created 256K log 'log_radio'
<6>[ 0.187075] logger: created 256K log 'log_system'
<4>[ 0.187617] enter sun5i Audio codec!!!
<6>[ 0.188360] sun5i audio support initialized
<4>[ 0.188578] sun5i Audio codec successfully loaded..
<6>[ 0.188630] ALSA device list:
<6>[ 0.188638] #0: sun5i-CODEC Audio Codec
<6>[ 0.188797] Netfilter messages via NETLINK v0.30.
<6>[ 0.188883] nf_conntrack version 0.5.0 (5654 buckets, 22616 max)
<6>[ 0.189394] ctnetlink v0.93: registering with nfnetlink.
<6>[ 0.189409] NF_TPROXY: Transparent proxy support initialized,
version 4.1.0
<6>[ 0.189418] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 0.189723] IPv4 over IPv4 tunneling driver
<6>[ 0.190168] GRE over IPv4 demultiplexor driver
<6>[ 0.190183] GRE over IPv4 tunneling driver
<6>[ 0.190692] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 0.190849] TCP cubic registered
<6>[ 0.190859] Initializing XFRM netlink socket
<6>[ 0.191652] NET: Registered protocol family 10
<6>[ 0.192442] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 0.192609] IPv6 over IPv4 tunneling driver
<6>[ 0.193384] NET: Registered protocol family 17
<6>[ 0.193422] NET: Registered protocol family 15
<6>[ 0.193440] L2TP core driver, V2.0
<6>[ 0.193456] PPPoL2TP kernel driver, V2.0
<6>[ 0.193463] L2TP IP encapsulation support (L2TPv3)
<6>[ 0.193688] L2TP netlink interface
<6>[ 0.193726] L2TP ethernet pseudowire support (L2TPv3)
<6>[ 0.193736] VFP support v0.3: implementor 41 architecture 3 part
30 variant c rev 3
<5>[ 0.193772] Registering SWP/SWPB emulation handler
<4>[ 0.194008] dram_sysdev_init finished!
<6>[ 0.194980] registered taskstats version 1
<4>[ 0.195007] [LCD] lcd_module_init
<4>[ 0.197821] [DISP WRN]
file:drivers/video/sun5i/disp/de_bsp/iep/disp_iep.c,line:669:
lcdgamma4iep not exit.
<4>[ 0.763657] regulator_init_complete: axp20_buck3: incomplete
constraints, leaving on
<4>[ 0.763934] regulator_init_complete: axp20_buck2: incomplete
constraints, leaving on
<4>[ 0.764202] regulator_init_complete: axp20_ldo4: incomplete
constraints, leaving on
<4>[ 0.764469] regulator_init_complete: axp20_ldo3: incomplete
constraints, leaving on
<4>[ 0.764735] regulator_init_complete: axp20_ldo2: incomplete
constraints, leaving on
<4>[ 0.765070] WRN:L118(drivers/usb/host/sw_hci_sun5i.c):ERR: get
usbc controller type 1(usbc1) id failed
<4>[ 0.765107] WRN:L118(drivers/usb/host/sw_hci_sun5i.c):ERR: get
usbc controller type 1(usbc1) id failed
<4>[ 0.765755] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1,
sw_ehci: 0xc0991aa4
<4>[ 0.765780] [sw-ehci1]: open clock
<4>[ 0.785791] usb_passby en=1,passly=0
<4>[ 0.785801] hci_port_configure en=1,config_cnt=0
<4>[ 0.785810] [sw-ehci1]: Set USB Power ON
<6>[ 0.786557] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host
Controller (EHCI) Driver
<6>[ 0.786591] sw-ehci sw-ehci.1: new USB bus registered, assigned
bus number 2
<6>[ 0.786707] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
<6>[ 0.800044] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
<4>[ 0.800057] ehci_irq: port change detect
<6>[ 0.800624] hub 2-0:1.0: USB hub found
<6>[ 0.800651] hub 2-0:1.0: 1 port detected
<4>[ 0.800868] [sw-ehci1]: sw_usb_disable_ehci
<4>[ 0.800880] [sw-ehci1]: remove, pdev->name: sw-ehci, pdev->id:
1, sw_ehci: 0xc0991aa4
<6>[ 0.800891] sw-ehci sw-ehci.1: remove, state 1
<6>[ 0.800912] usb usb2: USB disconnect, device number 1
<6>[ 0.801776] sw-ehci sw-ehci.1: USB bus 2 deregistered
<4>[ 0.801794] [sw-ehci1]: Set USB Power OFF
<4>[ 0.802280] hci_port_configure en=0,config_cnt=1
<4>[ 0.802290] usb_passby en=0,passly=1
<4>[ 0.802297] [sw-ehci1]: close clock
<4>[ 0.802447] [sw-ohci1]: probe, pdev->name: sw-ohci, pdev->id: 1,
sw_ohci: 0xc0991bbc
<4>[ 0.802461] [sw-ohci1]: open clock
<4>[ 0.822498] hci_port_configure en=1,config_cnt=0
<4>[ 0.822508] usb_passby en=1,passly=0
<4>[ 0.822518] [sw-ohci1]: Set USB Power ON
<6>[ 0.823257] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller
(OHCI) Driver
<6>[ 0.823288] sw-ohci sw-ohci.1: new USB bus registered, assigned
bus number 2
<6>[ 0.823327] sw-ohci sw-ohci.1: irq 40, io mem 0xf1c14400
<6>[ 0.884443] hub 2-0:1.0: USB hub found
<6>[ 0.884467] hub 2-0:1.0: 1 port detected
<4>[ 0.884662] [sw-ohci1]: sw_usb_disable_ohci
<4>[ 0.884675] [sw-ohci1]: remove, pdev->name: sw-ohci, pdev->id:
1, sw_ohci: 0xc0991bbc
<6>[ 0.884686] sw-ohci sw-ohci.1: remove, state 1
<6>[ 0.884701] usb usb2: USB disconnect, device number 1
<6>[ 0.885025] sw-ohci sw-ohci.1: USB bus 2 deregistered
<4>[ 0.885043] [sw-ohci1]: Set USB Power OFF
<4>[ 0.885532] usb_passby en=0,passly=1
<4>[ 0.885541] hci_port_configure en=0,config_cnt=1
<4>[ 0.885549] [sw-ohci1]: close clock
<6>[ 0.886603] pcf8563 1-0051: setting system clock to 2016-12-19
11:48:54 UTC (1482148134)
<4>[ 0.886722] Warning: unable to open an initial console.
<6>[ 0.886793] Freeing init memory: 168K
<3>[ 0.941674] init: width = 800
<3>[ 0.941698] init: height = 480
<3>[ 0.941711] init: s.st_size = 1536000
<6>[ 0.951091] init: command 'loglevel' r=0
<6>[ 0.951140] init: command 'export' r=0
<6>[ 0.951156] init: command 'export' r=0
<6>[ 0.951170] init: command 'export' r=0
<6>[ 0.951182] init: command 'export' r=0
<6>[ 0.951196] init: command 'export' r=0
<6>[ 0.951209] init: command 'export' r=0
<6>[ 0.951221] init: command 'export' r=0
<6>[ 0.951234] init: command 'export' r=0
<6>[ 0.951249] init: command 'export' r=0
<4>[ 0.961595] hello:init_nand_libmodule,21
<4>[ 0.961612] hello:init_nand_libmodule,22
<4>[ 0.961620] nand_init,line:1364
<4>[ 0.961633] [NAND]nand driver, init.
<4>[ 0.961646] [NAND] nand driver(b) version: 0x2, 0x12, data: 20130325
<4>[ 0.961655] [NAND] nand clk request start
<4>[ 0.961679] [NAND] nand clk request ok!
<4>[ 0.961726] [NAND] nand gpio_request
<4>[ 0.961789] [NAND] nand gpio_request fail
<4>[ 0.962053] [NAND] nand driver version: 0x2 0x12
<4>[ 0.962090] nand interrupte register ok
<4>[ 0.962101] [NAND] set nand_good_block_ratio 944
<4>[ 1.016171] nand part 3616 sec count is not align
<4>[ 1.016183] nand part 3616 start sec is not align
<4>[ 1.016190] nand part 3616 start sec is not align
<4>[ 1.016197] nand part 3616 start sec is not align
<4>[ 1.016205] nand part 3616 start sec is not align
<4>[ 1.016211] nand part 3616 start sec is not align
<4>[ 1.016218] nand part 3616 start sec is not align
<4>[ 1.016225] nand part 3616 start sec is not align
<4>[ 1.016232] nand part 3616 start sec is not align
<4>[ 1.016239] nand part 3616 start sec is not align
<4>[ 1.016246] nand part 4576 sec count is not align
<6>[ 1.018225] nanda:
<6>[ 1.020291] nandb: unknown partition table
<6>[ 1.022170] nandc: unknown partition table
<6>[ 1.024414] nandd: unknown partition table
<6>[ 1.026770] nande: unknown partition table
<6>[ 1.028566] nandf: unknown partition table
<6>[ 1.030425] nandg: unknown partition table
<6>[ 1.032644] nandh: unknown partition table
<6>[ 1.034402] nandi: unknown partition table
<6>[ 1.035962] nandj:
<6>[ 1.036292] benn: nand probe enter
<4>[ 1.036430] [NAND]nand driver, ok.
<6>[ 1.036694] init: command 'insmod' r=0
<6>[ 1.036781] init: command 'symlink' r=0
<6>[ 1.036847] init: command 'symlink' r=0
<6>[ 1.036886] init: command 'symlink' r=0
<6>[ 1.036912] init: command 'mkdir' r=0
<6>[ 1.037151] init: command 'mount' r=0
<6>[ 1.037276] init: command 'mkdir' r=0
<6>[ 1.037314] init: command 'mkdir' r=0
<6>[ 1.037352] init: command 'mkdir' r=0
<6>[ 1.037387] init: command 'mkdir' r=0
<6>[ 1.037420] init: command 'mkdir' r=0
<6>[ 1.037451] init: command 'mkdir' r=0
<6>[ 1.037480] init: command 'mkdir' r=0
<6>[ 1.037509] init: command 'mkdir' r=0
<6>[ 1.037538] init: command 'mkdir' r=0
<6>[ 1.037639] init: command 'mount' r=0
<6>[ 1.037676] init: command 'mkdir' r=0
<6>[ 1.037747] init: command 'mount' r=0
<6>[ 1.037881] init: command 'write' r=0
<6>[ 1.037964] init: command 'write' r=-2
<6>[ 1.038041] init: command 'write' r=0
<6>[ 1.038095] init: command 'write' r=0
<6>[ 1.038146] init: command 'write' r=0
<6>[ 1.038195] init: command 'write' r=-2
<6>[ 1.038236] init: command 'write' r=0
<6>[ 1.038271] init: command 'mkdir' r=0
<6>[ 1.038343] init: command 'mount' r=-1
<6>[ 1.038369] init: command 'chown' r=0
<6>[ 1.038399] init: command 'chown' r=-2
<6>[ 1.038422] init: command 'chmod' r=-2
<6>[ 1.038507] init: command 'write' r=0
<6>[ 1.038542] init: command 'mkdir' r=0
<6>[ 1.038567] init: command 'chown' r=-2
<6>[ 1.038590] init: command 'chmod' r=-2
<6>[ 1.038644] init: command 'write' r=0
<6>[ 1.038675] init: command 'mkdir' r=0
<6>[ 1.038701] init: command 'chown' r=-2
<6>[ 1.038724] init: command 'chmod' r=-2
<6>[ 1.038774] init: command 'write' r=0
<6>[ 1.038801] init: command 'chmod' r=0
<6>[ 1.038832] init: processing action 0xb82b20 (fs)
<6>[ 1.049479] EXT4-fs (nandd): barriers disabled
<6>[ 1.055414] EXT4-fs (nandd): mounted filesystem with ordered
data mode. Opts: barrier=0
<6>[ 1.055487] init: command 'mount' r=0
<6>[ 1.055558] init: command 'wait' r=0
<6>[ 1.066512] EXT4-fs (nande): barriers disabled
<6>[ 1.069682] EXT4-fs (nande): mounted filesystem with ordered
data mode. Opts: barrier=0
<6>[ 1.069853] init: command 'mount' r=0
<6>[ 1.069995] init: command 'setupfs' r=0
<3>[ 1.070072] init: do_umount: /data
<6>[ 1.080120] init: command 'umount' r=0
<6>[ 1.187367] init: command 'exec' r=0
<6>[ 1.281293] EXT4-fs (nande): barriers disabled
<6>[ 1.284547] EXT4-fs (nande): mounted filesystem with ordered
data mode. Opts: barrier=0,journal_checksum,noauto_da_alloc
<6>[ 1.284927] init: command 'exec' r=0
<6>[ 1.295356] EXT4-fs (nandh): barriers disabled
<6>[ 1.298456] EXT4-fs (nandh): mounted filesystem with ordered
data mode. Opts: barrier=0
<6>[ 1.298526] init: command 'mount' r=0
<6>[ 1.298674] init: command 'setupfs' r=0
<3>[ 1.298693] init: do_umount: /cache
<6>[ 1.310089] init: command 'umount' r=0
<6>[ 1.331451] init: command 'exec' r=0
<6>[ 1.343797] EXT4-fs (nandh): barriers disabled
<6>[ 1.347020] EXT4-fs (nandh): mounted filesystem with ordered
data mode. Opts: barrier=0,journal_checksum,noauto_da_alloc
<6>[ 1.347379] init: command 'exec' r=0
<3>[ 1.348692] init: dont need format /dev/block/nandj
<6>[ 1.348716] init: command 'format_userdata' r=1
<6>[ 1.348759] init: command 'wait' r=0
<6>[ 1.359355] EXT4-fs (nandi): barriers disabled
<6>[ 1.360761] EXT4-fs (nandi): mounted filesystem with ordered
data mode. Opts: barrier=0
<6>[ 1.360829] init: command 'mount' r=0
<6>[ 1.360971] init: command 'setupfs' r=0
<3>[ 1.360992] init: do_umount: /databk
<6>[ 1.370132] init: command 'umount' r=0
<6>[ 1.370203] init: command 'rmdir' r=0
<6>[ 1.370234] init: processing action 0xb7d0d0 (post-fs)
<6>[ 1.370350] init: command 'chown' r=0
<6>[ 1.370386] init: command 'chmod' r=0
<6>[ 1.389282] init: command 'chown' r=-5
<6>[ 1.389364] init: command 'chmod' r=-5
<6>[ 1.389427] init: command 'chown' r=0
<6>[ 1.389463] init: command 'chmod' r=0
<6>[ 1.389498] init: command 'chown' r=0
<6>[ 1.389529] init: command 'chmod' r=0
<6>[ 1.389577] init: command 'chown' r=0
<6>[ 1.389609] init: command 'chmod' r=0
<6>[ 1.389698] init: command 'mkdir' r=0
<6>[ 1.389725] init: processing action 0xb7d2c0 (post-fs-data)
<6>[ 1.389777] init: command 'chown' r=0
<6>[ 1.389805] init: command 'chmod' r=0
<6>[ 1.402349] init: command 'mkdir' r=0
<6>[ 1.402414] init: command 'copy' r=-1
<6>[ 1.403483] init: command 'chown' r=-2
<6>[ 1.403513] init: command 'chmod' r=-2
<6>[ 1.403539] init: command 'copy' r=-1
<6>[ 1.403570] init: command 'chown' r=-2
<6>[ 1.403589] init: command 'chmod' r=-2
<6>[ 1.403625] init: command 'write' r=-2
<6>[ 1.413192] init: command 'mkdir' r=0
<6>[ 1.414255] init: command 'mkdir' r=0
<6>[ 1.414318] init: command 'mkdir' r=0
<6>[ 1.414377] init: command 'mkdir' r=0
<6>[ 1.414434] init: command 'mkdir' r=0
<6>[ 1.414489] init: command 'mkdir' r=0
<6>[ 1.414546] init: command 'mkdir' r=0
<6>[ 1.414603] init: command 'mkdir' r=0
<6>[ 1.415678] init: command 'mkdir' r=0
<6>[ 1.415744] init: command 'chmod' r=0
<6>[ 1.415805] init: command 'mkdir' r=0
<6>[ 1.415836] init: command 'chown' r=0
<6>[ 1.415888] init: command 'mkdir' r=0
<6>[ 1.415966] init: command 'chmod' r=0
<6>[ 1.417052] init: command 'chmod' r=0
<6>[ 1.417117] init: command 'chmod' r=0
<6>[ 1.417163] init: command 'chmod' r=0
<6>[ 1.417208] init: command 'chmod' r=0
<6>[ 1.426014] init: command 'mkdir' r=0
<6>[ 1.427082] init: command 'mkdir' r=0
<6>[ 1.438110] init: command 'mkdir' r=0
<6>[ 1.447763] init: command 'mkdir' r=0
<6>[ 1.456539] init: command 'mkdir' r=0
<6>[ 1.466185] init: command 'mkdir' r=0
<6>[ 1.474904] init: command 'mkdir' r=0
<6>[ 1.474979] init: command 'mkdir' r=0
<6>[ 1.475037] init: command 'mkdir' r=0
<6>[ 1.475065] init: command 'chown' r=0
<6>[ 1.475090] init: command 'chmod' r=0
<6>[ 1.475144] init: command 'mkdir' r=0
<6>[ 1.475219] init: command 'mkdir' r=0
<6>[ 1.475413] init: command 'chown' r=0
<6>[ 1.475485] init: command 'chmod' r=0
<6>[ 1.475545] init: command 'chown' r=0
<6>[ 1.475589] init: command 'chmod' r=0
<6>[ 1.475606] init: processing action 0xb836a8 (property_service_init)
<6>[ 1.480174] init: Created socket '/dev/socket/property_service'
with mode '666', user '0', group '0'
<6>[ 1.480212] init: command 'property_service_init' r=0
<6>[ 1.480244] init: processing action 0xb836f0 (signal_init)
<6>[ 1.480324] init: command 'signal_init' r=0
<6>[ 1.480341] init: processing action 0xb83738 (check_startup)
<6>[ 1.480391] init: command 'check_startup' r=0
<6>[ 1.480421] init: processing action 0xb7dab0 (boot)
<6>[ 1.481654] init: command 'chown' r=0
<6>[ 1.481704] init: command 'chmod' r=0
<6>[ 1.482267] init: command 'ifup' r=0
<6>[ 1.482385] init: command 'hostname' r=0
<6>[ 1.482439] init: command 'domainname' r=0
<6>[ 1.482464] init: command 'setrlimit' r=0
<6>[ 1.482528] init: command 'write' r=0
<6>[ 1.482585] init: command 'write' r=0
<6>[ 1.482706] init: command 'chown' r=0
<6>[ 1.482743] init: command 'chmod' r=0
<6>[ 1.482781] init: command 'chown' r=0
<6>[ 1.482809] init: command 'chmod' r=0
<4>[ 1.482892] init (1): /proc/1/oom_adj is deprecated, please use
/proc/1/oom_score_adj instead.
<6>[ 1.482914] init: command 'write' r=0
<6>[ 1.482969] init: command 'write' r=0
<6>[ 1.483012] init: command 'write' r=0
<6>[ 1.483044] init: command 'chown' r=-2
<6>[ 1.483068] init: command 'chown' r=-2
<6>[ 1.483090] init: command 'chown' r=-2
<6>[ 1.483112] init: command 'chown' r=-2
<6>[ 1.483133] init: command 'chown' r=-2
<6>[ 1.483175] init: command 'chown' r=0
<6>[ 1.483207] init: command 'chown' r=0
<6>[ 1.483241] init: command 'chown' r=0
<6>[ 1.483264] init: command 'chmod' r=0
<6>[ 1.483286] init: command 'chmod' r=0
<6>[ 1.483306] init: command 'chmod' r=0
<6>[ 1.483368] init: command 'chown' r=0
<6>[ 1.483398] init: command 'chmod' r=0
<6>[ 1.483433] init: command 'chown' r=-2
<6>[ 1.483473] init: command 'chown' r=-2
<6>[ 1.483500] init: command 'chown' r=-2
<6>[ 1.483525] init: command 'chown' r=-2
<6>[ 1.483550] init: command 'chown' r=-2
<6>[ 1.483574] init: command 'chown' r=-2
<6>[ 1.483601] init: command 'chown' r=-2
<6>[ 1.483624] init: command 'chown' r=-2
<6>[ 1.483648] init: command 'chown' r=-2
<6>[ 1.483672] init: command 'chown' r=-2
<6>[ 1.483695] init: command 'chown' r=-2
<6>[ 1.483719] init: command 'chown' r=-2
<6>[ 1.483745] init: command 'chown' r=-2
<6>[ 1.483769] init: command 'chown' r=-2
<6>[ 1.483793] init: command 'chown' r=-2
<6>[ 1.483816] init: command 'chown' r=-2
<6>[ 1.483840] init: command 'chown' r=-2
<6>[ 1.483864] init: command 'chown' r=-2
<6>[ 1.483898] init: command 'chown' r=-2
<6>[ 1.483948] init: command 'chown' r=0
<6>[ 1.483982] init: command 'chown' r=0
<6>[ 1.484018] init: command 'chown' r=0
<6>[ 1.484048] init: command 'chown' r=0
<6>[ 1.484080] init: command 'chown' r=0
<6>[ 1.484111] init: command 'chown' r=0
<6>[ 1.484161] init: command 'chown' r=0
<6>[ 1.484225] init: command 'setprop' r=0
<6>[ 1.484268] init: command 'setprop' r=0
<6>[ 1.484312] init: command 'setprop' r=0
<6>[ 1.484353] init: command 'setprop' r=0
<6>[ 1.484393] init: command 'setprop' r=0
<6>[ 1.484434] init: command 'setprop' r=0
<6>[ 1.484475] init: command 'setprop' r=0
<6>[ 1.484500] init: command 'setprop' r=0
<6>[ 1.484527] init: command 'setprop' r=0
<3>[ 1.484559] init: service 'console' requires console
<5>[ 1.484650] init: starting 'servicemanager'
<5>[ 1.485138] init: starting 'vold'
<6>[ 1.485448] init: command 'class_start' r=0
<5>[ 1.485564] init: starting 'netd'
<5>[ 1.485890] init: starting 'debuggerd'
<5>[ 1.486229] init: starting 'surfaceflinger'
<5>[ 1.486564] init: starting 'zygote'
<5>[ 1.486918] init: starting 'drm'
<5>[ 1.487247] init: starting 'media'
<5>[ 1.487579] init: starting 'dbus'
<5>[ 1.487912] init: starting 'installd'
<3>[ 1.488245] init: cannot find '/system/etc/install-recovery.sh',
disabling 'flash_recovery'
<5>[ 1.488295] init: starting 'keystore'
<5>[ 1.488666] init: starting 'u3gmonitor'
<5>[ 1.489014] init: starting 'ril-daemon'
<5>[ 1.489340] init: starting 'memsicd'
<5>[ 1.489672] init: starting 'logcat'
<6>[ 1.489951] init: command 'class_start' r=0
<6>[ 1.492245] init: Created socket '/dev/socket/zygote' with mode
'666', user '0', group '0'
<6>[ 1.493127] init: Created socket '/dev/socket/dnsproxyd' with
mode '660', user '0', group '3003'
<6>[ 1.493213] init: Created socket '/dev/socket/netd' with mode
'660', user '0', group '1000'
<6>[ 1.498683] init: Created socket '/dev/socket/keystore' with
mode '666', user '0', group '0'
<6>[ 1.499469] init: Created socket '/dev/socket/vold' with mode
'660', user '0', group '1009'
<6>[ 1.500735] init: Created socket '/dev/socket/installd' with
mode '600', user '1000', group '1000'
<6>[ 1.501414] init: Created socket '/dev/socket/dbus' with mode
'660', user '1002', group '1002'
<6>[ 1.506122] init: Created socket '/dev/socket/rild-debug' with
mode '660', user '1001', group '1000'
<6>[ 1.506287] init: Created socket '/dev/socket/rild' with mode
'660', user '0', group '1001'
<6>[ 1.509891] init: processing action 0xb82e70 (boot)
<6>[ 1.581057] init: command 'insmod' r=0
<6>[ 1.631744] init: command 'insmod' r=0
<6>[ 1.684159] init: command 'insmod' r=0
<6>[ 1.733032] init: command 'insmod' r=0
<6>[ 1.770498] init: command 'insmod' r=0
<6>[ 1.812099] init: command 'insmod' r=0
<6>[ 1.857527] init: command 'insmod' r=0
<6>[ 1.938609] [CSI]Welcome to CSI driver
<6>[ 1.938631] [CSI]csi_init
<6>[ 1.940958] [CSI]registered sub device,input_num = 0
<6>[ 1.940983] [CSI]registered sub device,input_num = 1
<6>[ 1.941266] [CSI]V4L2 device registered as video0
<6>[ 1.941493] init: command 'insmod' r=0
<6>[ 1.941614] init: waitpid returned pid 90, status = 00000000
<5>[ 1.941632] init: process 'memsicd', pid 90 exited
<5>[ 1.941650] init: process 'memsicd' killing any children in process group
<6>[ 1.941743] init: waitpid returned pid 93, status = 0000ff00
<3>[ 1.941761] init: untracked pid 93 exited
<6>[ 1.985533] ===========================ft5x_ts_init=====================
<6>[ 1.985556] ctp_fetch_sysconfig_para.
<6>[ 1.985582] ctp_fetch_sysconfig_para: after: ctp_twi_addr is
0x38, dirty_addr_buf: 0x38. dirty_addr_buf[1]: 0xfffe
<6>[ 1.985598] ctp_fetch_sysconfig_para: ctp_twi_id is 1.
<6>[ 1.985617] ctp_fetch_sysconfig_para: screen_max_x = 800.
<6>[ 1.985628] ctp_fetch_sysconfig_para: screen_max_y = 480.
<6>[ 1.985637] ctp_fetch_sysconfig_para: revert_x_flag = 0.
<6>[ 1.985646] ctp_fetch_sysconfig_para: revert_y_flag = 0.
<6>[ 1.985656] ctp_fetch_sysconfig_para: exchange_x_y_flag = 0.
<6>[ 1.985668] ft5x_ts_init: after fetch_sysconfig_para:
normal_i2c: 0x38. normal_i2c[1]: 0xfffe
<6>[ 1.986075] ctp_detect: Detected chip ft5x_ts at adapter 1, address 0x38
<6>[ 1.986251] ====ft5x_ts_probe begin=====.
<4>[ 1.986509] [i2c1] incomplete xfer (0x20)
<6>[ 1.986521] msg ft5x_i2c_rxdata i2c read error: -70
<4>[ 1.986527] touch panel not ft5x!
<4>[ 1.986545] ft5x_ts: probe of 1-0038 failed with error -70
<6>[ 1.986727] init: command 'insmod' r=0
<4>[ 2.040669] ===========================goodix_ts_init=====================
<4>[ 2.040690] ctp_fetch_sysconfig_para.
<4>[ 2.040717] ctp_fetch_sysconfig_para: after: ctp_twi_addr is
0x55, dirty_addr_buf: 0x55. dirty_addr_buf[1]: 0xfffe
<4>[ 2.040732] ctp_fetch_sysconfig_para: ctp_twi_id is 1.
<6>[ 2.040751] ctp_fetch_sysconfig_para: screen_max_x = 800.
<6>[ 2.040763] ctp_fetch_sysconfig_para: screen_max_y = 480.
<6>[ 2.040772] ctp_fetch_sysconfig_para: revert_x_flag = 0.
<6>[ 2.040781] ctp_fetch_sysconfig_para: revert_y_flag = 0.
<6>[ 2.040791] ctp_fetch_sysconfig_para: exchange_x_y_flag = 0.
<4>[ 2.040799] goodix_ts_init: after fetch_sysconfig_para:
normal_i2c: 0x55. normal_i2c[1]: 0xfffe
<6>[ 2.041096] ctp_detect: Detected chip Goodix-TS at adapter 1, address 0x55
<6>[ 2.041283] ===============================GT801
Probe===========================
<6>[ 2.041300] Begin goodix i2c test
<4>[ 2.041523] [i2c1] incomplete xfer (0x20)
<4>[ 2.060299] [i2c1] incomplete xfer (0x20)
<4>[ 2.080515] [i2c1] incomplete xfer (0x20)
<4>[ 2.100293] [i2c1] incomplete xfer (0x20)
<4>[ 2.120313] [i2c1] incomplete xfer (0x20)
<6>[ 2.140097] Warnning: I2C connection might be something wrong!
<6>[ 2.140300] init: command 'insmod' r=0
<6>[ 2.173382] ctp_fetch_sysconfig_para.
<6>[ 2.173425] ctp_fetch_sysconfig_para: after: ctp_twi_addr is
0x76, dirty_addr_buf: 0x76. dirty_addr_buf[1]: 0xfffe
<6>[ 2.173438] ctp_fetch_sysconfig_para: ctp_twi_id is 1.
<6>[ 2.173457] ctp_fetch_sysconfig_para: screen_max_x = 800.
<6>[ 2.173468] ctp_fetch_sysconfig_para: screen_max_y = 480.
<6>[ 2.173478] ctp_fetch_sysconfig_para: revert_x_flag = 0.
<6>[ 2.173488] ctp_fetch_sysconfig_para: revert_y_flag = 0.
<6>[ 2.173498] ctp_fetch_sysconfig_para: exchange_x_y_flag = 0.
<6>[ 2.173508] zet6221_ts_init: after fetch_sysconfig_para:
normal_i2c: 0x76. normal_i2c[1]: 0xfffe
<6>[ 2.174000] ctp_detect: Detected chip zet622x-ts at adapter 1,
address 0x76
<4>[ 2.174547] [i2c1] incomplete xfer (0x48)
<4>[ 2.174559] touch panel not zet622x!
<6>[ 2.174565] ==singlethread error =
<4>[ 2.174584] zet622x-ts: probe of 1-0076 failed with error -70
<6>[ 2.174782] init: command 'insmod' r=0
<4>[ 2.203222] ===========================goodix_ts_init=====================
<4>[ 2.203242] ctp_fetch_sysconfig_para.
<3>[ 2.203264] ctp_fetch_sysconfig_para: ctp_unused.
<4>[ 2.203272] goodix_ts_init: err.
<6>[ 2.203872] init: command 'insmod' r=-1
<4>[ 2.226633] ===============< sitronix_ts_init >==============
<4>[ 2.226654] Sitronix touchscreen driver 1.0.0 (r2836)
<4>[ 2.226663] Release date: 20120703
<4>[ 2.226669] ctp_fetch_sysconfig_para.
<4>[ 2.226708] ctp_fetch_sysconfig_para: after: ctp_twi_addr is
0x60, dirty_addr_buf: 0x60. dirty_addr_buf[1]: 0xfffe
<4>[ 2.226788] ctp_fetch_sysconfig_para: ctp_twi_id is 1.
<6>[ 2.226803] ctp_fetch_sysconfig_para: screen_max_x = 800.
<6>[ 2.226815] ctp_fetch_sysconfig_para: screen_max_y = 480.
<6>[ 2.226826] ctp_fetch_sysconfig_para: revert_x_flag = 0.
<6>[ 2.226838] ctp_fetch_sysconfig_para: revert_y_flag = 1.
<6>[ 2.226849] ctp_fetch_sysconfig_para: exchange_x_y_flag = 1.
<4>[ 2.226859] sitronix_ts_init: after fetch_sysconfig_para:
normal_i2c: 0x60. normal_i2c[1]: 0xfffe
<4>[ 2.228055] i2c-core: driver [sitronix_ts] using legacy suspend method
<4>[ 2.228071] i2c-core: driver [sitronix_ts] using legacy resume method
<6>[ 2.228100] ctp_detect: Detected chip sitronix_ts at adapter 1,
address 0x60
<4>[ 2.228322] sitronix_ts_probe
<4>[ 2.228900] [i2c1] incomplete xfer (0x20)
<4>[ 2.228913] sitronix_ts_read_data: I2C read fail!
<4>[ 2.229384] [i2c1] incomplete xfer (0x20)
<4>[ 2.229395] sitronix_ts_read_data: I2C read fail!
<4>[ 2.229855] [i2c1] incomplete xfer (0x20)
<4>[ 2.229867] sitronix_ts_read_data: I2C read fail!
<4>[ 2.229874] sitronix_ts_get_device_status: Read device status
failed!sitronix_ts_probe: Unable to read device status!
<4>[ 2.229904] sitronix_ts: probe of 1-0060 failed with error -5
<6>[ 2.230195] init: command 'insmod' r=0
<4>[ 2.261748] ===========================goodix_ts_init=====================
<4>[ 2.261772] ctp_fetch_sysconfig_para.
<4>[ 2.261804] ctp_fetch_sysconfig_para: after: ctp_twi_addr is
0x5d, dirty_addr_buf: 0x5d. dirty_addr_buf[1]: 0xfffe
<4>[ 2.261817] ctp_fetch_sysconfig_para: ctp_twi_id is 1.
<6>[ 2.261837] ctp_fetch_sysconfig_para: screen_max_x = 800.
<6>[ 2.261848] ctp_fetch_sysconfig_para: screen_max_y = 480.
<6>[ 2.261858] ctp_fetch_sysconfig_para: revert_x_flag = 0.
<6>[ 2.261869] ctp_fetch_sysconfig_para: revert_y_flag = 1.
<6>[ 2.261879] ctp_fetch_sysconfig_para: exchange_x_y_flag = 1.
<4>[ 2.261888] goodix_ts_init: after fetch_sysconfig_para:
normal_i2c: 0x5d. normal_i2c[1]: 0xfffe
<4>[ 2.261946] script parser fetch err.
<4>[ 2.261954] ctp_init_platform_resource: tp_reset request gpio fail!
<4>[ 2.261962] ctp_set_gpio_mode: config gpio to io mode.
<4>[ 2.262291] ctp_reset.
<4>[ 2.262305] ctp_wakeup.
<6>[ 2.910435] ctp_detect: Detected chip gt82x_ts at adapter 1, address 0x5d
<4>[ 2.910829] <--GT-DEBUG-->Start to install Goodix Capacitive
TouchScreen driver.
<4>[ 2.910847] <--GT-DEBUG-->*DRIVER INFORMATION
<4>[ 2.910855] <--GT-DEBUG-->**RELEASE DATE:2012-02-07.
<4>[ 2.910862] <--GT-DEBUG-->**COMPILE TIME:Jul 8 2013, 11:55:40.
<4>[ 2.910882] <--GT msg-->TOUCH_MAX_WIDTH : 0x480
<4>[ 2.910889] <--GT msg-->TOUCH_MAX_HEIGHT : 0x800
<6>[ 2.911465] input: gt82x as /devices/virtual/input/input2
<4>[ 2.912605] <--GT msg-->Register input device successfully!
<6>[ 2.912664] ctp_set_irq_mode: config gpio to int mode.
<6>[ 2.912709] ctp_set_irq_mode, 255: gpio_int_info, port = 7, port_num = 11.
<6>[ 2.912717] INTERRUPT CONFIG
<4>[ 2.987594] [i2c1] incomplete xfer (0x20)
<4>[ 2.987793] [i2c1] incomplete xfer (0x20)
<3>[ 2.987812] gt82x_ts 1-005d: I2C transfer error. Number:-70
<3>[ 2.987817] <--GT msg-->Testing I2C connection...
<4>[ 3.080973] [i2c1] incomplete xfer (0x20)
<4>[ 3.110066] Testing I2C connection count=0
<4>[ 3.110279] [i2c1] incomplete xfer (0x20)
<4>[ 3.140111] Testing I2C connection count=1
<4>[ 3.140327] [i2c1] incomplete xfer (0x20)
<4>[ 3.170160] Testing I2C connection count=2
<3>[ 3.170201] gt82x_ts 1-005d: Warnning: I2C communication might be ERROR!
<4>[ 3.170216] <--GT msg-->I2C test failed. I2C addr:5d
<5>[ 3.170226] gt82x_ts 1-005d: The driver is removing...
<4>[ 3.171661] gt82x_ts: probe of 1-005d failed with error -1
<6>[ 3.171915] init: command 'insmod' r=0
<6>[ 3.172061] init: waitpid returned pid 81, status = 00000000
<5>[ 3.172081] init: process 'surfaceflinger', pid 81 exited
<5>[ 3.172100] init: process 'surfaceflinger' killing any children
in process group
<5>[ 3.172407] init: service 'zygote' is being killed
<5>[ 3.174330] init: starting 'zygote'
<6>[ 3.174840] init: waitpid returned pid 82, status = 00000009
<3>[ 3.174868] init: untracked pid 82 exited
<6>[ 3.176129] init: Created socket '/dev/socket/zygote' with mode
'666', user '0', group '0'
<6>[ 3.201335] ilitek_init
<4>[ 3.201357] Inet Version
====================inet_ximeng_ilitek=================
<4>[ 3.201366] m_inet_ctpState return false,continue deteck
<4>[ 3.201376] ctp_fetch_sysconfig_para.
<4>[ 3.201413] ctp_fetch_sysconfig_para: ctp_twi_id is 1.
<6>[ 3.201426] ctp_fetch_sysconfig_para: screen_max_x = 800.
<6>[ 3.201438] ctp_fetch_sysconfig_para: screen_max_y = 480.
<6>[ 3.201449] ctp_fetch_sysconfig_para: revert_x_flag = 0.
<6>[ 3.201460] ctp_fetch_sysconfig_para: revert_y_flag = 0.
<6>[ 3.201472] ctp_fetch_sysconfig_para: exchange_x_y_flag = 0.
<4>[ 3.201481] rtp_used = 0
<4>[ 3.202014] ------------------[ilitek] probe Enter
--------------------ilitek_i2c_probe
<4>[ 3.202341] [i2c1] incomplete xfer (0x20)
<4>[ 3.220342] [i2c1] incomplete xfer (0x20)
<4>[ 3.240287] [i2c1] incomplete xfer (0x20)
<4>[ 3.260283] [i2c1] incomplete xfer (0x20)
<1>[ 3.280092] ilitek_i2c_read_info, i2c read error, ret -70
<1>[ 3.280112] ilitek_check_tpid, id = 0 0
<4>[ 3.280120] ilitek_i2c_probe, probe i2c_check_functionality fail
<6>[ 3.280127] ilitek_i2c_probe, i2c new style format
<4>[ 3.280135] ilitek_i2c_probe, IRQ: 0x0
<4>[ 3.340436] [i2c1] incomplete xfer (0x20)
<4>[ 3.360336] [i2c1] incomplete xfer (0x20)
<4>[ 3.380325] [i2c1] incomplete xfer (0x20)
<4>[ 3.400269] [i2c1] incomplete xfer (0x20)
<1>[ 3.420090] ilitek_i2c_read_info, i2c read error, ret -70
<1>[ 3.420110] ilitek_i2c_probe, read_tp_info, error
<4>[ 3.420138] ilitek_i2c: probe of 1-0041 failed with error -1
<6>[ 3.420289] __ilitek_i2c_register_device, add i2c device, success
<6>[ 3.420301] __ilitek_i2c_register_device, client.addr: 0x41
<6>[ 3.420309] __ilitek_i2c_register_device, client.adapter: 0xDF029C28
<6>[ 3.420318] __ilitek_i2c_register_device, client.driver: 0x0
<1>[ 3.420325] __ilitek_i2c_register_device, invalid register
<1>[ 3.420457] ilitek_init, register i2c device, error
<6>[ 3.420758] init: command 'insmod' r=-1
<6>[ 3.420936] init: command 'insmod' r=-1
<4>[ 3.449457] ===========================pixcir_ts_init=====================
<4>[ 3.449706] ctp_fetch_sysconfig_para: ctp_unused.
<4>[ 3.449717] pixcir_ts_init: err.
<6>[ 3.450400] init: command 'insmod' r=-1
<4>[ 3.537617] ==gsl_ts_init==
<4>[ 3.537712] ctp_fetch_sysconfig_para.
<4>[ 3.537750] ctp_fetch_sysconfig_para: after: ctp_twi_addr is
0x40, dirty_addr_buf: 0x40. dirty_addr_buf[1]: 0xfffe
<4>[ 3.537765] ctp_fetch_sysconfig_para: ctp_twi_id is 1.
<6>[ 3.537781] ctp_fetch_sysconfig_para: screen_max_x = 800.
<6>[ 3.537792] ctp_fetch_sysconfig_para: screen_max_y = 480.
<6>[ 3.537803] ctp_fetch_sysconfig_para: revert_x_flag = 0.
<6>[ 3.537814] ctp_fetch_sysconfig_para: revert_y_flag = 0.
<6>[ 3.537828] ctp_fetch_sysconfig_para: exchange_x_y_flag = 1.
<4>[ 3.537837] gsl_ts_init: after fetch_sysconfig_para:
normal_i2c: 0x40. normal_i2c[1]: 0xfffe
<6>[ 3.539002] ctp_detect: Detected chip gslx680 at adapter 1, address 0x40
<4>[ 3.540240] GSLX680 Enter gsl_ts_probe
<4>[ 3.540259] ==kzalloc success=
<6>[ 3.540828] I read reg 0xf0 is 0
<6>[ 3.560394] I write reg 0xf0 0x12
<6>[ 3.580556] I read reg 0xf0 is 0x12
<4>[ 3.610197] script parser fetch err.
<4>[ 3.610226] ctp_init_platform_resource: tp_reset request gpio fail!
<4>[ 3.610235] [GSLX680] Enter gsl_ts_init_ts
<6>[ 3.611174] input: gslx680 as
/devices/platform/sun5i-i2c.1/i2c-1/1-0040/input/input3
<6>[ 3.612000] ctp_set_irq_mode: config gpio to int mode.
<6>[ 3.612042] ctp_set_irq_mode, 347: gpio_int_info, port = 7, port_num = 11.
<6>[ 3.612050] INTERRUPT CONFIG
<6>[ 3.800539] I read reg 0xf0 is 0
<6>[ 3.820335] I write reg 0xf0 0x12
<6>[ 3.840565] I read reg 0xf0 is 0x12
<4>[ 3.860743] read 0xfc = a0 88 0 0
<4>[ 3.860762] =============gsl_load_fw start==============
<4>[ 5.042685] =============gsl_load_fw end==============
<4>[ 5.180807] [i2c1] incomplete xfer (0x48)
<4>[ 5.181512] [GSLX680] End gsl_ts_probe
<6>[ 5.181952] init: command 'insmod' r=0
<4>[ 5.249988] UMP<2>: Inserting UMP device driver. Compiled: Jul
8 2013, time: 11:57:15
<4>[ 5.251055] UMP<2>: Using OS memory backend, allocation limit: 134217728
<4>[ 5.251078] UMP: UMP device driver loaded
<6>[ 5.251339] init: command 'insmod' r=0
<4>[ 5.420785] Mali: Mali device driver loaded
<6>[ 5.421315] init: command 'insmod' r=0
<6>[ 5.421457] init: command 'insmod' r=-1
<6>[ 5.449528] usbcore: registered new interface driver asix
<6>[ 5.449712] init: command 'insmod' r=0
<6>[ 5.468203] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
<6>[ 5.468604] usbcore: registered new interface driver rtl8150
<6>[ 5.468775] init: command 'insmod' r=0
<6>[ 5.488510] usbcore: registered new interface driver qf9700
<6>[ 5.488737] init: command 'insmod' r=0
<6>[ 5.507432] usbcore: registered new interface driver MOSCHIP
usb-ethernet driver
<6>[ 5.507660] init: command 'insmod' r=0
<4>[ 5.524693] [cedar dev]: install start!!!
<4>[ 5.526852] [cedar dev]: install end!!!
<6>[ 5.527010] init: command 'insmod' r=0
<6>[ 5.527098] init: command 'insmod' r=-1
<6>[ 5.527157] init: command 'chmod' r=-2
<6>[ 5.541155] ecompass driver: init
<6>[ 5.541927] input: ecompass_data as /devices/virtual/input/input4
<6>[ 5.543417] init: command 'insmod' r=0
<6>[ 5.557580] mxc622x driver: init
<4>[ 5.557602] ========gsensor_fetch_sysconfig_para===================
<4>[ 5.557632] gsensor_fetch_sysconfig_para: after:
gsensor_twi_addr is 0x15, dirty_addr_buf: 0x15. dirty_addr_buf[1]:
0xfffe
<4>[ 5.557648] gsensor_fetch_sysconfig_para: tkey_twi_id is 1.
<4>[ 5.557657] mxc622x_init: after fetch_sysconfig_para:
normal_i2c: 0x15. normal_i2c[1]: 0xfffe
<6>[ 5.559147] gsensor_detect: Detected chip mxc622x at adapter 1,
address 0x15
<4>[ 5.559628] mxc622x_probe, line is: 333.
<6>[ 5.560637] init: command 'insmod' r=0
<6>[ 5.560786] init: command 'chmod' r=0
<6>[ 5.561073] init: command 'mkdir' r=0
<6>[ 5.561119] init: processing action 0xb83780 (queue_propety_triggers)
<6>[ 5.561196] init: command 'queue_propety_triggers' r=0
<6>[ 5.561221] init: processing action 0xb7e4e0 (nonencrypted)
<6>[ 5.561240] init: command 'class_start' r=0
<6>[ 5.561259] init: processing action 0xb7ec08
(property:persist.sys.usb.config=*)
<6>[ 5.561324] init: command 'setprop' r=0
<6>[ 5.561346] init: processing action 0xb7edd8 (property:ro.debuggable=1)
<3>[ 5.561363] init: service 'console' requires console
<6>[ 5.561375] init: command 'start' r=0
<6>[ 5.561392] init: processing action 0xb82010
(property:sys.usb.config=mass_storage,adb)
<3>[ 5.561625] android_usb: already disabled
<6>[ 5.561660] init: command 'write' r=0
<6>[ 5.561755] init: command 'write' r=0
<6>[ 5.561849] init: command 'write' r=0
<6>[ 5.561934] init: command 'write' r=0
<4>[ 5.562085] ep_matches, wrn: endpoint already claimed,
ep(0xc08caff8, 0xdf029000, ep1-bulk)
<6>[ 5.562103] adb_bind_config
<4>[ 5.562113] ep_matches, wrn: endpoint already claimed,
ep(0xc08caff8, 0xdf029000, ep1-bulk)
<4>[ 5.562123] ep_matches, wrn: endpoint already claimed,
ep(0xc08cb038, 0xdf029000, ep2-bulk)
<4>[ 5.562135] ep_matches, wrn: endpoint already claimed,
ep(0xc08caff8, 0xdf029000, ep1-bulk)
<4>[ 5.562145] ep_matches, wrn: endpoint already claimed,
ep(0xc08cb038, 0xdf029000, ep2-bulk)
<4>[ 5.562155] ep_matches, wrn: endpoint already claimed,
ep(0xc08cb078, 0xdf021880, ep3-bulk)
<4>[ 5.562167] [sw_udc]: alloc request: ep(0xc08cb0b8, ep4-bulk,
512), req(0xdec3e240)
<4>[ 5.562180] [sw_udc]: alloc request: ep(0xc08cb078, ep3-bulk,
512), req(0xdec3e280)
<4>[ 5.562192] [sw_udc]: alloc request: ep(0xc08cb078, ep3-bulk,
512), req(0xdec3e2c0)
<4>[ 5.562205] [sw_udc]: alloc request: ep(0xc08cb078, ep3-bulk,
512), req(0xdec3e300)
<4>[ 5.562217] [sw_udc]: alloc request: ep(0xc08cb078, ep3-bulk,
512), req(0xdec3e340)
<4>[ 5.562232] [sw_udc]: sw_udc_pullup, is_on = 1
<4>[ 5.562242] WRN:L2729(drivers/usb/sun5i_usb/udc/sw_udc.c):ERR:
usb device is not active
<6>[ 5.562265] init: command 'write' r=0
<5>[ 5.562307] init: starting 'adbd'
<6>[ 5.562768] init: command 'start' r=0
<6>[ 5.562857] init: command 'setprop' r=0
<6>[ 5.565005] adb_open
<5>[ 6.564071] init: starting 'surfaceflinger'
<5>[ 6.564661] init: starting 'memsicd'
<4>[ 6.864472] UMP<2>: New session opened
<5>[ 7.138513] init: starting 'bootanim'
<4>[ 7.550472] UMP<2>: New session opened
<6>[ 12.380515] warning: `zygote' uses 32-bit capabilities (legacy
support in use)
<4>[ 16.095949] [AXP]power key up
<4>[ 16.300557] [AXP]axp_battery_event, 786, event = 0x40
<6>[ 19.644704] request_suspend_state: wakeup (3->0) at 19644670063
(2016-12-19 11:49:13.253621187 UTC)
<6>[ 20.224870] acc_open
<6>[ 20.224919] acc_release
<4>[ 21.698188] sw_usb_enable_hcd: usbc_num = 1
<4>[ 21.698214] ERR: script_parser_fetch usb_controller_type failed
<4>[ 21.698231] [sw-ehci1]: sw_usb_enable_ehci
<4>[ 21.698246] [sw-ehci1]: probe, pdev->name: sw-ehci, pdev->id: 1,
sw_ehci: 0xc0991aa4
<4>[ 21.698265] [sw-ehci1]: open clock
<4>[ 21.790949] usb_passby en=1,passly=0
<4>[ 21.790967] hci_port_configure en=1,config_cnt=0
<4>[ 21.790980] [sw-ehci1]: Set USB Power ON
<6>[ 21.798094] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host
Controller (EHCI) Driver
<6>[ 21.798159] sw-ehci sw-ehci.1: new USB bus registered, assigned
bus number 2
<6>[ 21.798285] sw-ehci sw-ehci.1: irq 39, io mem 0xf1c14000
<6>[ 21.818790] sw-ehci sw-ehci.1: USB 0.0 started, EHCI 1.00
<4>[ 21.818812] ehci_irq: port change detect
<6>[ 21.823589] hub 2-0:1.0: USB hub found
<6>[ 21.823637] hub 2-0:1.0: 1 port detected
<4>[ 21.825109] rtl8188eu driver version=v4.1.2.1_5574.20121024
<4>[ 21.825124] build time: Jul 8 2013 11:56:37
<4>[ 21.825133] ##########rtw_suspend_lock_init ###########
<6>[ 21.827099] usbcore: registered new interface driver rtl8188eu
<6>[ 22.140210] usb 2-1: new high speed USB device number 2 using sw-ehci
<4>[ 22.294203] register rtw_netdev_ops to netdev_ops
<4>[ 22.294230] rtw_wdev_alloc(padapter=e14c9000)
<4>[ 22.294431] CHIP TYPE: RTL8188E
<4>[ 22.294465]
<4>[ 22.294468] usb_endpoint_descriptor(0):
<4>[ 22.294478] bLength=7
<4>[ 22.294483] bDescriptorType=5
<4>[ 22.294488] bEndpointAddress=81
<4>[ 22.294494] wMaxPacketSize=512
<4>[ 22.294500] bInterval=0
<4>[ 22.294505] RT_usb_endpoint_is_bulk_in = 1
<4>[ 22.294512]
<4>[ 22.294515] usb_endpoint_descriptor(1):
<4>[ 22.294521] bLength=7
<4>[ 22.294526] bDescriptorType=5
<4>[ 22.294531] bEndpointAddress=2
<4>[ 22.294536] wMaxPacketSize=512
<4>[ 22.294542] bInterval=0
<4>[ 22.294548] RT_usb_endpoint_is_bulk_out = 2
<4>[ 22.294554]
<4>[ 22.294557] usb_endpoint_descriptor(2):
<4>[ 22.294563] bLength=7
<4>[ 22.294568] bDescriptorType=5
<4>[ 22.294573] bEndpointAddress=3
<4>[ 22.294579] wMaxPacketSize=512
<4>[ 22.294584] bInterval=0
<4>[ 22.294589] RT_usb_endpoint_is_bulk_out = 3
<4>[ 22.294597] nr_endpoint=3, in_num=1, out_num=2
<4>[ 22.294601]
<4>[ 22.294606] USB_SPEED_HIGH
<4>[ 22.297101] Chip Version Info:
CHIP_8188E_Normal_Chip_TSMC_A_CUT_1T1R_RomVer(0)
<4>[ 22.297139] RF_Type is 3!!
<4>[ 22.297152] _ConfigNormalChipOutEP_8188E OutEpQueueSel(0x05),
OutEpNumber(2)
<4>[ 22.297342] EEPROM type is E-FUSE
<4>[ 22.297352] ====> _ReadAdapterInfo8188EU
<4>[ 22.297456] Boot from EFUSE, Autoload OK !
<4>[ 22.357552] UMP<2>: New session opened
<4>[ 22.709604] EEPROM ID=0x8129
<4>[ 22.709622] VID = 0x0BDA, PID = 0x0179
<4>[ 22.709630] Customer ID: 0x00, SubCustomer ID: 0xCD
<4>[ 22.709643]
Hal_ReadPowerSavingMode88E...bHWPwrPindetect(0)-bHWPowerdown(0)
,bSupportRemoteWakeup(0)
<4>[ 22.709653] ### PS params=> power_mgnt(1),usbss_enable(0) ###
<4>[ 22.709667] ======= Path 0, Channel 0 =======
<4>[ 22.709675] Index24G_CCK_Base[0][0] = 0x2c
<4>[ 22.709682] Index24G_BW40_Base[0][0] = 0x30
<4>[ 22.709689] ======= Path 0, Channel 1 =======
<4>[ 22.709696] Index24G_CCK_Base[0][1] = 0x2c
<4>[ 22.709705] Index24G_BW40_Base[0][1] = 0x30
<4>[ 22.709712] ======= Path 0, Channel 2 =======
<4>[ 22.709719] Index24G_CCK_Base[0][2] = 0x2c
<4>[ 22.709726] Index24G_BW40_Base[0][2] = 0x30
<4>[ 22.709733] ======= Path 0, Channel 3 =======
<4>[ 22.709740] Index24G_CCK_Base[0][3] = 0x2c
<4>[ 22.709747] Index24G_BW40_Base[0][3] = 0x2f
<4>[ 22.709753] ======= Path 0, Channel 4 =======
<4>[ 22.709761] Index24G_CCK_Base[0][4] = 0x2c
<4>[ 22.709768] Index24G_BW40_Base[0][4] = 0x2f
<4>[ 22.709775] ======= Path 0, Channel 5 =======
<4>[ 22.709782] Index24G_CCK_Base[0][5] = 0x2c
<4>[ 22.709789] Index24G_BW40_Base[0][5] = 0x2f
<4>[ 22.709796] ======= Path 0, Channel 6 =======
<4>[ 22.709803] Index24G_CCK_Base[0][6] = 0x2b
<4>[ 22.709810] Index24G_BW40_Base[0][6] = 0x2e
<4>[ 22.709817] ======= Path 0, Channel 7 =======
<4>[ 22.709824] Index24G_CCK_Base[0][7] = 0x2b
<4>[ 22.709831] Index24G_BW40_Base[0][7] = 0x2e
<4>[ 22.709837] ======= Path 0, Channel 8 =======
<4>[ 22.709845] Index24G_CCK_Base[0][8] = 0x2b
<4>[ 22.709852] Index24G_BW40_Base[0][8] = 0x2e
<4>[ 22.709858] ======= Path 0, Channel 9 =======
<4>[ 22.709865] Index24G_CCK_Base[0][9] = 0x2b
<4>[ 22.709872] Index24G_BW40_Base[0][9] = 0x2e
<4>[ 22.709879] ======= Path 0, Channel 10 =======
<4>[ 22.709886] Index24G_CCK_Base[0][10] = 0x2b
<4>[ 22.709893] Index24G_BW40_Base[0][10] = 0x2e
<4>[ 22.709900] ======= Path 0, Channel 11 =======
<4>[ 22.709908] Index24G_CCK_Base[0][11] = 0x2b
<4>[ 22.709914] Index24G_BW40_Base[0][11] = 0x2e
<4>[ 22.709921] ======= Path 0, Channel 12 =======
<4>[ 22.709929] Index24G_CCK_Base[0][12] = 0x2b
<4>[ 22.709936] Index24G_BW40_Base[0][12] = 0x2d
<4>[ 22.709943] ======= Path 0, Channel 13 =======
<4>[ 22.709950] Index24G_CCK_Base[0][13] = 0x2b
<4>[ 22.709957] Index24G_BW40_Base[0][13] = 0x2d
<4>[ 22.709964] ======= Path 0, Channel 14 =======
<4>[ 22.709971] Index24G_CCK_Base[0][14] = 0x2b
<4>[ 22.709978] Index24G_BW40_Base[0][14] = 0x2d
<4>[ 22.709985] ======= TxCount 0 =======
<4>[ 22.709991] CCK_24G_Diff[0][0]= 0
<4>[ 22.709998] OFDM_24G_Diff[0][0]= 0
<4>[ 22.710004] BW20_24G_Diff[0][0]= 0
<4>[ 22.710136] BW40_24G_Diff[0][0]= 0
<4>[ 22.710144] ======= TxCount 1 =======
<4>[ 22.710151] CCK_24G_Diff[0][1]= -2
<4>[ 22.710158] OFDM_24G_Diff[0][1]= -2
<4>[ 22.710164] BW20_24G_Diff[0][1]= -2
<4>[ 22.710171] BW40_24G_Diff[0][1]= -2
<4>[ 22.710177] ======= TxCount 2 =======
<4>[ 22.710183] CCK_24G_Diff[0][2]= -2
<4>[ 22.710190] OFDM_24G_Diff[0][2]= -2
<4>[ 22.710196] BW20_24G_Diff[0][2]= -2
<4>[ 22.710203] BW40_24G_Diff[0][2]= -2
<4>[ 22.710208] ======= TxCount 3 =======
<4>[ 22.710215] CCK_24G_Diff[0][3]= -2
<4>[ 22.710222] OFDM_24G_Diff[0][3]= -2
<4>[ 22.710228] BW20_24G_Diff[0][3]= -2
<4>[ 22.710234] BW40_24G_Diff[0][3]= -2
<4>[ 22.710241] EEPROMRegulatory = 0x0
<4>[ 22.710248] mlmepriv.ChannelPlan = 0x20
<4>[ 22.710255] EEPROM Customer ID: 0x 0
<4>[ 22.710264] EEPROM : AntDivCfg = 0, TRxAntDivType = 3
<4>[ 22.710271] Board Type: 0x 0
<4>[ 22.710277] ThermalMeter = 0x1a
<4>[ 22.710287] <==== _ReadAdapterInfo8188EU in 420 ms
<4>[ 22.711818] rtw_register_early_suspend
<4>[ 22.711884] rtw_macaddr_cfg MAC Address = e0:b2:f1:64:2d:b4
<4>[ 22.711895] MAC Address from pnetdev->dev_addr= e0:b2:f1:64:2d:b4
<4>[ 22.723645] bDriverStopped:1, bSurpriseRemoved:0, bup:0,
hw_init_completed:0
<4>[ 23.035415] rtw_android_priv_cmd: Android private cmd "BLOCK 1" on wlan0
<5>[ 23.869490] init: starting 'wpa_supplicant'
<6>[ 23.879631] init: Created socket '/dev/socket/wpa_wlan0' with
mode '660', user '1010', group '1010'
<4>[ 24.126535] cfg80211_rtw_change_iface call netdev_open
<4>[ 24.126562] +871x_drv - drv_open, bup=0
<4>[ 24.242819] rtl8188e_FirmwareDownload: fw_ver=4 fw_subver=0 sig=0x88e1
<4>[ 24.290882] _FWFreeToGo: Checksum report OK! REG_MCUFWDL:0x00030004
<4>[ 24.293998] _FWFreeToGo: Polling FW ready success!! REG_MCUFWDL:0x000300c6
<4>[ 24.294020] Set RF Chip ID to RF_6052 and RF type to 1T1R.
<4>[ 24.687870] pDM_Odm TxPowerTrackControl = 1
<4>[ 25.081115] MAC Address from REG_MACID = e0:b2:f1:64:2d:b4
<4>[ 25.081135] rtl8188eu_hal_init in 960ms
<4>[ 25.081146] MAC Address = e0:b2:f1:64:2d:b4
<4>[ 25.086194] rtw_cfg80211_init_wiphy:rf_type=3
<4>[ 25.086211] -871x_drv - drv_open, bup=1
<4>[ 25.086224] cfg80211_rtw_change_iface, old_iftype=6, new_iftype=2
<4>[ 25.086390] +871x_drv - drv_open, bup=1
<4>[ 25.086399] -871x_drv - drv_open, bup=1
<4>[ 25.086494] cfg80211_rtw_set_power_mgmt
<6>[ 25.086675] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>[ 25.087696] cfg80211_rtw_flush_pmksa
<4>[ 25.095410] hw_var_set_opmode()-3435 mode = 2
<4>[ 25.101479] cfg80211_rtw_change_station
<4>[ 25.101624] cfg80211_rtw_change_station
<4>[ 25.101692] cfg80211_rtw_change_station
<4>[ 25.101883] rtw_android_priv_cmd: Android private cmd
"P2P_DEV_ADDR" on wlan0
<4>[ 25.127213] rtw_android_priv_cmd: Android private cmd "BLOCK 0" on wlan0
<6>[ 25.186535] init: waitpid returned pid 310, status = 00000000
<3>[ 25.186566] init: untracked pid 310 exited
<4>[ 25.681924] rtw_android_priv_cmd: Android private cmd
"BTCOEXSCAN-STOP" on wlan0
<4>[ 25.683464] rtw_android_priv_cmd: Android private cmd
"RXFILTER-ADD 3" on wlan0
<4>[ 25.687118] rtw_android_priv_cmd: Android private cmd
"RXFILTER-START" on wlan0
<4>[ 25.687648] rtw_android_priv_cmd: Android private cmd
"RXFILTER-STOP" on wlan0
<4>[ 25.688902] rtw_android_priv_cmd: Android private cmd
"RXFILTER-REMOVE 2" on wlan0
<4>[ 25.689262] rtw_android_priv_cmd: Android private cmd
"RXFILTER-START" on wlan0
<4>[ 25.691159] rtw_android_priv_cmd: Android private cmd "SETBAND 0" on wlan0
<4>[ 25.734650] rtw_android_priv_cmd: Android private cmd
"SCAN-ACTIVE" on wlan0
<4>[ 25.746002] rtw_android_priv_cmd: Android private cmd
"SCAN-PASSIVE" on wlan0
<4>[ 26.102646] cfg80211_rtw_change_station
<4>[ 26.695765] survey done event(15)
<4>[ 26.696880]
<4>[ 26.696886] =>cfg80211_rtw_connect(netdev=d4e02800)
<4>[ 26.696901] privacy=1, key= (null), key_len=0, key_idx=0
<4>[ 26.696920] ssid=margo, len=5
<4>[ 26.696928] bssid=c4:6e:1f:3f:af:50
<4>[ 26.696936] matched by bssid
<4>[ 26.696946] rtw_cfg80211_set_wpa_version, wpa_version=2
<4>[ 26.696953] rtw_cfg80211_set_auth_type, nl80211_auth_type=0
<4>[ 26.696964] rtw_cfg80211_set_cipher, ucast=1, cipher=0xfac04
<4>[ 26.696974] rtw_cfg80211_set_cipher, ucast=0, cipher=0xfac04
<4>[ 26.696982] rtw_cfg80211_set_key_mgt, key_mgt=0xfac02
<4>[ 26.696990] cfg80211_rtw_connect, ie_len=22
<4>[ 26.696999] set wpa_ie(length:22):
<4>[ 26.697009] 0x30 0x14 0x01 0x00 0x00 0x0f 0xac 0x04
<4>[ 26.697019] 0x01 0x00 0x00 0x0f 0xac 0x04 0x01 0x00
<4>[ 26.697028] 0x00 0x0f 0xac 0x02 0x00 0x00 0x00 0x00
<4>[ 26.697040] got wpa2_ie
<4>[ 26.697068] Set SSID under fw_state=0x00000008
<4>[ 26.697087] [by_bssid:0][assoc_ssid:margo][to_roaming:0] new
candidate: margo(c4:6e:1f:3f:af:50) rssi:-84
<4>[ 26.697101] rtw_select_and_join_from_scanned_queue: candidate:
margo(c4:6e:1f:3f:af:50)
<4>[ 26.697137] link to Artheros AP
<4>[ 26.697151] set ssid:dot11AuthAlgrthm=2, dot11PrivacyAlgrthm=4,
dot118021XGrpPrivacy=4
<4>[ 26.697162] <=cfg80211_rtw_connect, ret 0
<4>[ 26.697336] cfg80211_rtw_change_station
<4>[ 26.697420] cfg80211_rtw_change_station
<4>[ 26.697483] cfg80211_rtw_change_station
<4>[ 26.702091] set ch/bw before connected
<4>[ 26.785749] link to Artheros AP
<4>[ 26.785788] issue_deauth to c4:6e:1f:3f:af:50
<4>[ 26.785843] issue_auth
<4>[ 26.788722] OnAuthClient
<4>[ 26.788768] network.SupportedRates[0]=82
<4>[ 26.788777] network.SupportedRates[1]=84
<4>[ 26.788783] network.SupportedRates[2]=8B
<4>[ 26.788790] network.SupportedRates[3]=96
<4>[ 26.788797] network.SupportedRates[4]=0C
<4>[ 26.788803] network.SupportedRates[5]=12
<4>[ 26.788810] network.SupportedRates[6]=18
<4>[ 26.788816] network.SupportedRates[7]=24
<4>[ 26.788823] network.SupportedRates[8]=30
<4>[ 26.788829] network.SupportedRates[9]=48
<4>[ 26.788836] network.SupportedRates[10]=60
<4>[ 26.788842] network.SupportedRates[11]=6C
<4>[ 26.788853] bssrate_len = 12
<4>[ 26.792739] OnAssocRsp
<4>[ 26.792784] report_join_res(1)
<4>[ 26.792795] rtw_joinbss_update_network
<4>[ 26.792807] +rtw_update_ht_cap()
<4>[ 26.792832] rtw_joinbss_update_stainfo
<4>[ 26.792841] ### Set STA_(0) info
<4>[ 26.792860] rtw_cfg80211_indicate_connect(padapter=e14c9000)
<4>[ 26.792869] pwdev->sme_state(b)=1
<4>[ 26.792905] pwdev->sme_state(a)=1
<6>[ 26.793230] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<4>[ 26.793493] HW_VAR_BASIC_RATE: BrateCfg(0x15f)
<4>[ 26.794152] cfg80211_rtw_change_station
<4>[ 26.794253] cfg80211_rtw_change_station
<4>[ 26.794323] cfg80211_rtw_change_station
<4>[ 26.804877] WMM(0): 0, a42b
<4>[ 26.805043] WMM(1): 0, a44f
<4>[ 26.805273] WMM(2): 0, 5e4322
<4>[ 26.805366] WMM(3): 0, 2f3222
<4>[ 26.805376] HTOnAssocRsp
<4>[ 26.805434] cfg80211_rtw_add_key(netdev=d4e02800), Adding key
for c4:6e:1f:3f:af:50
<4>[ 26.805444] cipher=0xfac04
<4>[ 26.805449] key_len=0x10
<4>[ 26.805454] seq_len=0x6
<4>[ 26.805460] key_index=0
<4>[ 26.805512] pairwise=1
<4>[ 26.805522] rtw_cfg80211_set_encryption
<4>[ 26.805532] rtw_cfg80211_set_encryption, : param->u.crypt.set_tx ==1
<4>[ 26.805540]
<4>[ 26.805543] ~~~~stastakey:unicastkey
<4>[ 26.805556] rtw_cfg80211_set_encryption, ret=0
<4>[ 26.805689] cfg80211_rtw_set_default_key
<4>[ 26.807905] cfg80211_rtw_add_key(netdev=d4e02800), Adding key for (null)
<4>[ 26.807924] cipher=0xfac04
<4>[ 26.807929] key_len=0x10
<4>[ 26.807934] seq_len=0x6
<4>[ 26.807940] key_index=1
<4>[ 26.807945] pairwise=0
<4>[ 26.807954] rtw_cfg80211_set_encryption
<4>[ 26.808005]
<4>[ 26.808008] ~~~~stastakey:groupkey
<4>[ 26.808023] ==> rtw_set_key algorithm(4),keyid(1),key_mask(2)
<4>[ 26.808037] rtw_cfg80211_set_encryption, ret=0
<4>[ 26.815325] cfg80211_rtw_change_station
<4>[ 26.816652] UpdateHalRAMask8188EUsb => mac_id:0,
networkType:0x0b, mask:0x000fffff
<4>[ 26.816662] ==> rssi_level:0, rate_bitmap:0x000ff015
<4>[ 26.816680] ### MacID(0),Set Max Tx RPT MID(1)
<4>[ 26.818558] ### rtl8188e_set_FwMediaStatus_cmd: MStatus=1 MACID=0
<4>[ 26.826390] rtl8188e_set_FwJoinBssReport_cmd mstatus(1)
<4>[ 26.827242] SetFwRsvdPagePkt
<4>[ 26.827322] SetFwRsvdPagePkt: Set RSVD page location to Fw
<4>[ 26.833276] rtl8188e_set_FwJoinBssReport_cmd: 1 Download RSVD
success! DLBcnCount:1, poll:1
<4>[ 26.833863] Set RSVD page location to Fw.
<4>[ 26.834001] =>mlmeext_joinbss_event_callback
<4>[ 26.843512] rtw_android_priv_cmd: Android private cmd
"BTCOEXMODE 1" on wlan0
<4>[ 26.844144] cfg80211_rtw_set_power_mgmt
<5>[ 26.847980] init: starting 'dhcpcd_wlan0'
<4>[ 27.095548] UpdateHalRAMask8188EUsb => mac_id:0,
networkType:0x0b, mask:0x000fffff
<4>[ 27.095557] ==> rssi_level:3, rate_bitmap:0x000ff015
<4>[ 27.367087] OnAction_back
<4>[ 27.367115] OnAction_back, action=0
<4>[ 27.367126] issue_action_BA, category=3, action=1, status=0
<4>[ 28.052063] cfg80211_rtw_set_power_mgmt
<4>[ 28.052433] rtw_android_priv_cmd: Android private cmd
"BTCOEXMODE 2" on wlan0
<4>[ 30.003139] UMP<2>: New session opened
<4>[ 30.065509] UMP<2>: New session opened
<6>[ 30.475655] init: processing action 0xb80430
(property:sys.boot_completed=1)
<5>[ 30.475741] init: starting 'preinstall'
<6>[ 30.476183] init: command 'start' r=0
<5>[ 30.551510] init: service 'bootanim' is being killed
<4>[ 30.555409] UMP<2>: Session closed
<6>[ 30.560607] init: waitpid returned pid 149, status = 00000009
<5>[ 30.560635] init: process 'bootanim', pid 149 exited
<6>[ 31.302024] init: waitpid returned pid 520, status = 00000000
<5>[ 31.302056] init: process 'preinstall', pid 520 exited
<7>[ 37.790104] wlan0: no IPv6 routers present
<4>[ 43.874368] rtw_issue_addbareq_cmd, p=0
<4>[ 43.874992] issue_action_BA, category=3, action=0, status=0
<4>[ 43.875019] BA_starting_seqctrl = 246 for TID=0
<4>[ 43.877166] OnAction_back
<4>[ 43.877243] OnAction_back, action=1
<4>[ 43.877255] agg_enable for TID=0
<4>[ 55.586223] UMP<2>: New session opened
<4>[ 69.080394] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 69.094343] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 70.326185] battery vol change: 68->67
<4>[ 73.080248] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 73.080284] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 79.088690] UpdateHalRAMask8188EUsb => mac_id:0,
networkType:0x0b, mask:0x000fffff
<4>[ 79.088699] ==> rssi_level:2, rate_bitmap:0x000ff000
<4>[ 81.332144] UMP<2>: New session opened
<4>[ 101.093711] UMP<2>: New session opened
<4>[ 141.080565] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 141.080604] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 167.081756] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 167.081795] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 167.088012] UpdateHalRAMask8188EUsb => mac_id:0,
networkType:0x0b, mask:0x000fffff
<4>[ 167.088019] ==> rssi_level:3, rate_bitmap:0x000ff015
<4>[ 171.089038] UpdateHalRAMask8188EUsb => mac_id:0,
networkType:0x0b, mask:0x000fffff
<4>[ 171.089050] ==> rssi_level:2, rate_bitmap:0x000ff000
<4>[ 175.080318] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 175.080353] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 179.299464] UMP<2>: Session closed
<4>[ 180.543984] battery vol change: 67->66
<4>[ 181.080368] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 181.080424] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<6>[ 186.101568] binder: 157:175 transaction failed 29189, size 144-0
<4>[ 191.080446] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 191.080481] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 197.080242] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 197.080280] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 199.080242] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 199.080280] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 207.080974] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 207.081069] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 209.080331] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 209.080368] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 223.080321] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 223.080358] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 225.080337] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 225.080380] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 229.081313] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 229.081348] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 229.087781] UpdateHalRAMask8188EUsb => mac_id:0,
networkType:0x0b, mask:0x000fffff
<4>[ 229.087790] ==> rssi_level:3, rate_bitmap:0x000ff015
<4>[ 235.080491] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 235.080595] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 243.080910] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 243.080948] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 247.080418] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 247.080484] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 251.080665] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 251.080746] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 251.112587] UpdateHalRAMask8188EUsb => mac_id:0,
networkType:0x0b, mask:0x000fffff
<4>[ 251.112600] ==> rssi_level:2, rate_bitmap:0x000ff000
<4>[ 253.082042] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 253.082077] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 255.080319] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 255.080354] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 257.080193] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 257.080229] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 265.080667] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 265.080704] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 267.080471] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 267.080508] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 269.080284] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 269.080321] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 279.080252] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 279.080286] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 281.080256] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 281.080290] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 285.080293] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 285.080327] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 299.080297] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 299.080334] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 300.823812] battery vol change: 66->65
<4>[ 303.080308] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 303.080346] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 305.084050] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 305.084098] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 319.080178] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 319.080215] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 321.080653] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 321.080724] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 325.080247] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 325.080285] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 335.080303] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 335.080340] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 337.080334] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 337.080372] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 347.080284] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 347.080320] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 349.080293] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 349.080332] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 357.080352] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 357.080389] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 365.080309] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 365.080345] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 367.080304] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 367.080342] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 373.085366] UpdateHalRAMask8188EUsb => mac_id:0,
networkType:0x0b, mask:0x000fffff
<4>[ 373.085375] ==> rssi_level:3, rate_bitmap:0x000ff015
<4>[ 377.080272] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 377.080308] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 381.080305] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 381.080340] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 385.080337] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 385.080371] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 387.080350] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 387.080384] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 393.080271] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 393.080307] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 397.080304] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 397.080353] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 401.080487] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 401.080525] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 405.080369] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 405.080403] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 407.080388] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 407.080424] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 409.080395] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 409.080430] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 411.043466] battery vol change: 65->64
<4>[ 413.082162] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 413.082266] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 422.500637] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 422.500672] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 433.080338] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 433.080375] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 435.080354] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 435.080392] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 437.080365] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 437.080404] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 439.080290] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 439.080325] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 439.212568] UMP<2>: New session opened
<4>[ 443.080307] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 443.080343] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 445.080284] rtw_set_ps_mode: Leave 802.11 power save
<4>[ 445.080333] rtl8188e_set_FwPwrMode_cmd: Mode=0 SmartPS=2 UAPSD=0
<4>[ 447.304198] UMP<2>: New session opened
<4>[ 453.082623] rtw_set_ps_mode: Enter 802.11 power save
<4>[ 453.082666] rtl8188e_set_FwPwrMode_cmd: Mode=1 SmartPS=2 UAPSD=0
<4>[ 458.113859] UMP<2>: New session opened
app_44@android:/ $

[vasilr007]

Добрый Вечер! Помогите пожалуйста найти прошивку на cpu A 13 mb INET-86VZ-REV03 Zeng-gc 2013-07-08 axp209 silead G9L1680
wi-fi realtek rtl8188etv samsung 149 k9gbg08uom camera одна jmt-ry v1.0 msd0329-86v gc0329 gl sensor sl- - 003 zjx

[Blaze]

Добрый вечер. Со старым Новым годом!

dolphin724, попробуйте эту прошивку

kucheberiya, что-то с таблицей разделов NAND памяти.

Код: Выделить всё

6>[ 1.020291] nandb: unknown partition table
<6>[ 1.022170] nandc: unknown partition table
<6>[ 1.024414] nandd: unknown partition table
<6>[ 1.026770] nande: unknown partition table
<6>[ 1.028566] nandf: unknown partition table
<6>[ 1.030425] nandg: unknown partition table
<6>[ 1.032644] nandh: unknown partition table
<6>[ 1.034402] nandi: unknown partition table

Возможно поможет переразметка прошивкой.
Для BCL-A13-98V-B A2.0 есть прошивка B3.S10YL2.98V.B.SS.20130926.7z
Прошивать через SD карту - Как прошить планшет AllWinner A13 с помощью PhoenixCard

vasilr007, попробуйте эту прошивку a13_2g_7inch_phone_tablet.7z

[vasilr007]

vasilr007, попробуйте эту прошивку a13_2g_7inch_phone_tablet.7z Добрый день не подходит весит на заставке android

[overclocks55]

Здравствуйте . Можно ли на планшет 7 дюймов с разрешением 800*480 поставить дисплей 7 дюймов с разрешением 1024*600 ? Планшет с процессором Allwinner A13 , 3G, Bluetooth, Wi-Fi . Можно ли как-нибудь программно это исправить ?

[dolphin724]

dolphin724, попробуйте эту прошивку

Не подходит, есть еще варианты?