Спутниковая рыбалка в Porteus [Linux]

Граббинг, Шаринг, Настройка ресиверов...
boyek
Начинающий
Начинающий
Сообщения: 5
Зарегистрирован: 16.02.2010 19:32
Откуда: Долгоруково

Re: Перехват Globax, Slonax 2/3G, Torrents и SkyDsl 8/9

Непрочитанное сообщение#701 » boyek » 17.02.2010 14:28

Всем привет!

По skynet 1b19 ты прав.

Код: Выделить всё

root@slax:~# lsmod | grep dvb
cx88_dvb               25732  0
cx88_vp3054_i2c         6272  1 cx88_dvb
videobuf_dvb           10244  1 cx88_dvb
dvb_core               87820  2 cx88_dvb,videobuf_dvb
cx8802                 18308  1 cx88_dvb
cx88xx                 78892  3 cx88_dvb,cx8800,cx8802
videobuf_dma_sg        14852  4 cx88_dvb,cx8800,cx8802,cx88xx
videobuf_core          19076  5 videobuf_dvb,cx8800,cx8802,cx88xx,videobuf_dma_sg
root@slax:~# dmesg | grep dvb
cx88/2: cx2388x dvb driver version 0.0.7 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
root@slax:~# dmesg | grep flexcop
root@slax:~# dmesg | grep flexcop последняя команда не реагирует

Аватара пользователя
Blaze
Информатик-аналитик
Информатик-аналитик
Сообщения: 8933
Зарегистрирован: 24.05.2007 17:23
Модель телефона: POCO X3 Pro 6/128
Прошивка: crDroid v7.7
Sat-ресивер: Tiviar Mini HD
Откуда: Данков
Контактная информация:

Re: Перехват Globax, Slonax 2/3G, Torrents и SkyDsl 8/9

Непрочитанное сообщение#702 » Blaze » 17.02.2010 16:41

Попробуйте так:

Код: Выделить всё

modprobe cx88-dvb
А что выдает при командах:

Код: Выделить всё

dmesg | grep cx88
dmesg | grep firmware
?

и еще весь лог dmesg скиньте на форум: надо ввести.

slavik22
Опытный
Опытный
Сообщения: 91
Зарегистрирован: 29.01.2009 0:20

Re: Перехват Globax, Slonax 2/3G, Torrents и SkyDsl 8/9

Непрочитанное сообщение#703 » slavik22 » 17.02.2010 17:31

Пробывал я правда не в слаксе а в убунте залочил успешно сигнал с помощью szap-s2 на 7E 10762 H 29500. Скайнет то запускается но потока нету. Может дело не в szap-s2 ав недоработанном драйвере под линукс?

Аватара пользователя
Blaze
Информатик-аналитик
Информатик-аналитик
Сообщения: 8933
Зарегистрирован: 24.05.2007 17:23
Модель телефона: POCO X3 Pro 6/128
Прошивка: crDroid v7.7
Sat-ресивер: Tiviar Mini HD
Откуда: Данков
Контактная информация:

Re: Перехват Globax, Slonax 2/3G, Torrents и SkyDsl 8/9

Непрочитанное сообщение#704 » Blaze » 17.02.2010 18:43

Да, дело может быть в недоработке исходного кода драйвера или исходного кода szap-s2. Одно из двух, а там и может треугольник вылезти.

boyek
Начинающий
Начинающий
Сообщения: 5
Зарегистрирован: 16.02.2010 19:32
Откуда: Долгоруково

Re: Перехват Globax, Slonax 2/3G, Torrents и SkyDsl 8/9

Непрочитанное сообщение#705 » boyek » 17.02.2010 20:40

Для меня это что-то забубённое

Код: Выделить всё

root@slax:~# modprobe cx88-dvb
root@slax:~# dmesg | grep cx88
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded
cx88[0]: subsystem: b033:3033, board: Prof 7300 DVB-S/S2 [card=75,autodetected], frontend(s): 1
cx88[0]: TV tuner type -1, Radio tuner type -1
cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
input: cx88 IR (Prof 7300 DVB-S/S2) as /class/input/input3
cx88[0]/2: cx2388x 8802 Driver Manager
cx88-mpeg driver manager 0000:01:00.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
cx88[0]/2: found at 0000:01:00.2, rev: 5, irq: 21, latency: 32, mmio: 0xf8000000
cx8800 0000:01:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
cx88[0]/0: found at 0000:01:00.0, rev: 5, irq: 21, latency: 32, mmio: 0xf7000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88/2: cx2388x dvb driver version 0.0.7 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: b033:3033, board: Prof 7300 DVB-S/S2 [card=75]
cx88[0]/2: cx2388x based DVB/ATSC card
cx8802_alloc_frontends() allocating 1 frontend(s)
DVB: registering new adapter (cx88[0])
root@slax:~# dmesg | grep firmware
root@slax:~# dmesg
W RAMDISK ==> [000097b000 - 0000c0b21e]
  #8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x00038000
  HighMem  0x00038000 -> 0x000cbfb0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x00000097
    0: 0x00000100 -> 0x000cbfb0
On node 0 totalpages: 835383
free_area_init_node: node 0, pgdat c0881280, node_mem_map c1000200
  DMA zone: 3943 pages, LIFO batch:0
  Normal zone: 223520 pages, LIFO batch:31
  HighMem zone: 601392 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
PM: Registered nosave memory: 0000000000097000 - 0000000000098000
PM: Registered nosave memory: 0000000000098000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at d0000000 (gap: cc000000:32e00000)
PERCPU: Allocating 39324 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 4, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 828855
Kernel command line: initrd=/boot/initrd.gz ramdisk_size=6666 root=/dev/ram0 rw autoexec=xconf;telinit~4 changes=/slax/ lang=ru vt.default_utf8=0 iocharset=cp1251 BOOT_IMAGE=/boot/vmlinuz
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PMTIMER calibration value
Detected 2333.066 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3302120k/3342016k available (5828k kernel code, 38524k reserved, 1947k data, 388k init, 2424512k highmem)
virtual kernel memory layout:
    fixmap  : 0xffe18000 - 0xfffff000   (1948 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
      .init : 0xc08a5000 - 0xc0906000   ( 388 kB)
      .data : 0xc06b1147 - 0xc0898118   (1947 kB)
      .text : 0xc0100000 - 0xc06b1147   (5828 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.13 BogoMIPS (lpj=9332264)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20080609
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Quad CPU    Q8200  @ 2.33GHz stepping 0a
Booting processor 1/1 ip 6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 4666.42 BogoMIPS (lpj=9332841)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Quad CPU    Q8200  @ 2.33GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Booting processor 2/2 ip 6000
Initializing CPU#2
Calibrating delay using timer specific routine.. 4666.43 BogoMIPS (lpj=9332862)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#2.
x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
CPU2: Intel(R) Core(TM)2 Quad CPU    Q8200  @ 2.33GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#2]: passed.
Booting processor 3/3 ip 6000
Initializing CPU#3
Calibrating delay using timer specific routine.. 4666.44 BogoMIPS (lpj=9332887)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#3.
x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
CPU3: Intel(R) Core(TM)2 Quad CPU    Q8200  @ 2.33GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#3]: passed.
Brought up 4 CPUs
Total of 4 processors activated (18665.42 BogoMIPS).
net_namespace: 768 bytes
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  9049.000 MB/sec
xor: using function: pIII_sse (9049.000 MB/sec)
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
PCI: 0000:00:1a.0 reg 20 io port: [9400, 941f]
PCI: 0000:00:1a.1 reg 20 io port: [9480, 949f]
PCI: 0000:00:1a.2 reg 20 io port: [9800, 981f]
PCI: 0000:00:1a.7 reg 10 32bit mmio: [f6fff400, f6fff7ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
PCI: 0000:00:1b.0 reg 10 64bit mmio: [f6ff8000, f6ffbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
PCI: 0000:00:1d.0 reg 20 io port: [9880, 989f]
PCI: 0000:00:1d.1 reg 20 io port: [9c00, 9c1f]
PCI: 0000:00:1d.2 reg 20 io port: [a000, a01f]
PCI: 0000:00:1d.7 reg 10 32bit mmio: [f6fff800, f6fffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
PCI: 0000:00:1f.2 reg 10 io port: [ac00, ac07]
PCI: 0000:00:1f.2 reg 14 io port: [a880, a883]
PCI: 0000:00:1f.2 reg 18 io port: [a800, a807]
PCI: 0000:00:1f.2 reg 1c io port: [a480, a483]
PCI: 0000:00:1f.2 reg 20 io port: [a400, a40f]
PCI: 0000:00:1f.2 reg 24 io port: [a080, a08f]
PCI: 0000:00:1f.3 reg 10 64bit mmio: [f6fffc00, f6fffcff]
PCI: 0000:00:1f.3 reg 20 io port: [400, 41f]
PCI: 0000:00:1f.5 reg 10 io port: [bc00, bc07]
PCI: 0000:00:1f.5 reg 14 io port: [b880, b883]
PCI: 0000:00:1f.5 reg 18 io port: [b800, b807]
PCI: 0000:00:1f.5 reg 1c io port: [b480, b483]
PCI: 0000:00:1f.5 reg 20 io port: [b400, b40f]
PCI: 0000:00:1f.5 reg 24 io port: [b080, b08f]
PCI: 0000:05:00.0 reg 10 32bit mmio: [fd000000, fdffffff]
PCI: 0000:05:00.0 reg 14 64bit mmio: [d0000000, dfffffff]
PCI: 0000:05:00.0 reg 1c 64bit mmio: [fa000000, fbffffff]
PCI: 0000:05:00.0 reg 24 io port: [ec00, ec7f]
PCI: 0000:05:00.0 reg 30 32bit mmio: [0, 7ffff]
PCI: bridge 0000:00:01.0 io port: [e000, efff]
PCI: bridge 0000:00:01.0 32bit mmio: [fa000000, febfffff]
PCI: bridge 0000:00:01.0 64bit mmio pref: [d0000000, dfffffff]
PCI: bridge 0000:00:1c.0 64bit mmio pref: [cff00000, cfffffff]
PCI: 0000:03:00.0 reg 10 io port: [dc00, dc07]
PCI: 0000:03:00.0 reg 14 io port: [d880, d883]
PCI: 0000:03:00.0 reg 18 io port: [d800, d807]
PCI: 0000:03:00.0 reg 1c io port: [d480, d483]
PCI: 0000:03:00.0 reg 20 io port: [d400, d40f]
PCI: 0000:03:00.0 reg 30 32bit mmio: [f9ff0000, f9ffffff]
pci 0000:03:00.0: supports D1
pci 0000:03:00.0: supports D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:03:00.0: PME# disabled
PCI: bridge 0000:00:1c.1 io port: [d000, dfff]
PCI: bridge 0000:00:1c.1 32bit mmio: [f9f00000, f9ffffff]
PCI: 0000:02:00.0 reg 10 io port: [c800, c8ff]
PCI: 0000:02:00.0 reg 18 64bit mmio: [cfeff000, cfefffff]
PCI: 0000:02:00.0 reg 20 64bit mmio: [cfef8000, cfefbfff]
PCI: 0000:02:00.0 reg 30 32bit mmio: [f9ee0000, f9efffff]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: supports D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
PCI: bridge 0000:00:1c.5 io port: [c000, cfff]
PCI: bridge 0000:00:1c.5 32bit mmio: [f9e00000, f9efffff]
PCI: bridge 0000:00:1c.5 64bit mmio pref: [cfe00000, cfefffff]
PCI: 0000:01:00.0 reg 10 32bit mmio: [f7000000, f7ffffff]
PCI: 0000:01:00.2 reg 10 32bit mmio: [f8000000, f8ffffff]
pci 0000:00:1e.0: transparent bridge
PCI: bridge 0000:00:1e.0 32bit mmio: [f7000000, f8ffffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - D7, should be D4 [20080609]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 17 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved
system 00:09: ioport range 0x280-0x28f has been reserved
system 00:09: ioport range 0x290-0x29f has been reserved
system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
system 00:0a: ioport range 0x800-0x87f has been reserved
system 00:0a: ioport range 0x500-0x57f has been reserved
system 00:0a: ioport range 0x900-0x90f has been reserved
system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:0a: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:0a: iomem range 0xfed40000-0xfed8ffff has been reserved
system 00:0c: iomem range 0xffc00000-0xffefffff could not be reserved
system 00:0d: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0f: iomem range 0xe0000000-0xefffffff has been reserved
system 00:10: iomem range 0x0-0x9ffff could not be reserved
system 00:10: iomem range 0xc0000-0xcffff could not be reserved
system 00:10: iomem range 0xe0000-0xfffff could not be reserved
system 00:10: iomem range 0x100000-0xcbffffff could not be reserved
system 00:10: iomem range 0xfed90000-0xffffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:05
pci 0000:00:01.0:   IO window: 0xe000-0xefff
pci 0000:00:01.0:   MEM window: 0xfa000000-0xfebfffff
pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: 0x000000cff00000-0x000000cfffffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1:   IO window: 0xd000-0xdfff
pci 0000:00:1c.1:   MEM window: 0xf9f00000-0xf9ffffff
pci 0000:00:1c.1:   PREFETCH window: disabled
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.5:   IO window: 0xc000-0xcfff
pci 0000:00:1c.5:   MEM window: 0xf9e00000-0xf9efffff
pci 0000:00:1c.5:   PREFETCH window: 0x000000cfe00000-0x000000cfefffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: 0xf7000000-0xf8ffffff
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 05 index 0 io port: [e000, efff]
bus: 05 index 1 mmio: [fa000000, febfffff]
bus: 05 index 2 mmio: [d0000000, dfffffff]
bus: 05 index 3 mmio: [0, 0]
bus: 04 index 0 mmio: [0, 0]
bus: 04 index 1 mmio: [0, 0]
bus: 04 index 2 mmio: [cff00000, cfffffff]
bus: 04 index 3 mmio: [0, 0]
bus: 03 index 0 io port: [d000, dfff]
bus: 03 index 1 mmio: [f9f00000, f9ffffff]
bus: 03 index 2 mmio: [0, 0]
bus: 03 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [c000, cfff]
bus: 02 index 1 mmio: [f9e00000, f9efffff]
bus: 02 index 2 mmio: [cfe00000, cfefffff]
bus: 02 index 3 mmio: [0, 0]
bus: 01 index 0 mmio: [0, 0]
bus: 01 index 1 mmio: [f7000000, f8ffffff]
bus: 01 index 2 mmio: [0, 0]
bus: 01 index 3 io port: [0, ffff]
bus: 01 index 4 mmio: [0, ffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 2624k freed
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/O].
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
GFS2 (built Jul 22 2009 07:23:43) installed
msgmni has been set to 1720
async_tx: api initialized (sync-only)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:05:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: found MSI capability
pci_express 0000:00:01.0:pcie00: allocate port service
pci_express 0000:00:01.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: found MSI capability
pci_express 0000:00:1c.0:pcie00: allocate port service
pci_express 0000:00:1c.0:pcie02: allocate port service
pci_express 0000:00:1c.0:pcie03: allocate port service
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: found MSI capability
pci_express 0000:00:1c.1:pcie00: allocate port service
pci_express 0000:00:1c.1:pcie02: allocate port service
pci_express 0000:00:1c.1:pcie03: allocate port service
pcieport-driver 0000:00:1c.5: setting latency timer to 64
pcieport-driver 0000:00:1c.5: found MSI capability
pci_express 0000:00:1c.5:pcie00: allocate port service
pci_express 0000:00:1c.5:pcie02: allocate port service
pci_express 0000:00:1c.5:pcie03: allocate port service
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input1
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT CBFC00C0, 01F3 (r1 DpgPmm  P001Ist       11 INTL 20051117)
processor ACPI0007:00: registered as cooling_device0
ACPI: SSDT CBFC02C0, 01F3 (r1 DpgPmm  P002Ist       12 INTL 20051117)
processor ACPI0007:01: registered as cooling_device1
ACPI: SSDT CBFC04C0, 01F3 (r1 DpgPmm  P003Ist       12 INTL 20051117)
processor ACPI0007:02: registered as cooling_device2
ACPI: SSDT CBFC06C0, 01F3 (r1 DpgPmm  P004Ist       12 INTL 20051117)
processor ACPI0007:03: registered as cooling_device3
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Uniform Multi-Platform E-IDE driver
ide-floppy driver 1.00
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver: 8.02.01-k7
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.2.7
Copyright(c) 2004-2008 Emulex.  All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
        with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
st: Version 20080504, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata1: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 19
ata2: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 19
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: NODEV after polling detection
ata1.00: ATAPI: Optiarc DVD RW AD-7241S, 1.01, max UDMA/100
ata1.00: configured for UDMA/100
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
scsi 2:0:0:0: CD-ROM            Optiarc  DVD RW AD-7241S  1.01 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
scsi 3:0:0:0: Direct-Access     ATA      SAMSUNG HD103SI  1AG0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sda] 1953525168 512-byte hardware sectors (1000205 MB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
sd 3:0:0:0: [sda] Attached SCSI disk
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 19
ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 19
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
usbmon: debugfs is not available
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf6fff400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf6fff800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009400
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009480
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009800
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009880
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009c00
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a000
usb usb8: configuration #1 chosen from 1 choice
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usb 7-2: new full speed USB device using uhci_hcd and address 2
usb 7-2: device descriptor read/64, error -71
usb 7-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
input: AT Translated Set 2 keyboard as /class/input/input2
raid6: int32x1    888 MB/s
raid6: int32x2    899 MB/s
raid6: int32x4    828 MB/s
raid6: int32x8    677 MB/s
raid6: mmxx1     3023 MB/s
raid6: mmxx2     3384 MB/s
raid6: sse1x1    2100 MB/s
raid6: sse1x2    2665 MB/s
raid6: sse2x1    3929 MB/s
raid6: sse2x2    4761 MB/s
raid6: using algorithm sse2x2 (4761 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Starting balanced_irq
Using IPI No-Shortcut mode
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
EXT4-fs warning (device ram0): ext4_fill_super: extents feature not enabled on this filesystem, use tune2fs.

EXT4-fs: ram0: not marked OK to use with test code.
VFS: Mounted root (ext2 filesystem).
Freeing unused kernel memory: 388k freed
squashfs: version 3.4 (2008/08/26) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
aufs 20081208
fuse init (API version 7.9)
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
NET: Registered protocol family 23
sr 2:0:0:0: Attached scsi generic sg0 type 5
sd 3:0:0:0: Attached scsi generic sg1 type 0
pata_via 0000:03:00.0: version 0.3.3
pata_via 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pata_via 0000:03:00.0: setting latency timer to 64
scsi6 : pata_via
scsi7 : pata_via
ata5: PATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
ata6: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
Linux video capture interface: v2.00
SigmaTel STIr4200 IRDA/USB found at address 2, Vendor: 66f, Product: 4200
stir4200: IrDA: Registered SigmaTel device irda0
usbcore: registered new interface driver stir4200
cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded
cx88[0]: subsystem: b033:3033, board: Prof 7300 DVB-S/S2 [card=75,autodetected], frontend(s): 1
cx88[0]: TV tuner type -1, Radio tuner type -1
cx88/0: cx2388x v4l2 driver version 0.0.7 loaded
input: cx88 IR (Prof 7300 DVB-S/S2) as /class/input/input3
Creating IR device irrcv0
cx88[0]/2: cx2388x 8802 Driver Manager
cx88-mpeg driver manager 0000:01:00.2: PCI INT A -> GSI 21 (level, low) -> IRQ 21
cx88[0]/2: found at 0000:01:00.2, rev: 5, irq: 21, latency: 32, mmio: 0xf8000000
Linux agpgart interface v0.103
cx8800 0000:01:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
cx88[0]/0: found at 0000:01:00.0, rev: 5, irq: 21, latency: 32, mmio: 0xf7000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
cx88/2: cx2388x dvb driver version 0.0.7 loaded
cx88/2: registering cx8802 driver, type: dvb access: shared
cx88[0]/2: subsystem: b033:3033, board: Prof 7300 DVB-S/S2 [card=75]
cx88[0]/2: cx2388x based DVB/ATSC card
cx8802_alloc_frontends() allocating 1 frontend(s)
DVB: registering new adapter (cx88[0])
DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118)...
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: unknown MAC (2b3000c0)
eth0: RTL8169 at 0xf8da4000, 00:19:66:c7:3f:31, XID 283000c0 IRQ 219
input: ImPS/2 Generic Wheel Mouse as /class/input/input4
Adding 6442024k swap on /dev/sda9.  Priority:1 extents:1 across:6442024k
input: PC Speaker as /class/input/input5
ppdev: user-space parallel port driver
lp: driver loaded but no devices found
EXT3-fs: sda8: couldn't mount because of unsupported optional features (240).
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
r8169: eth0: link down
EXT3-fs: sda8: couldn't mount because of unsupported optional features (240).
root@slax:~#

Аватара пользователя
Blaze
Информатик-аналитик
Информатик-аналитик
Сообщения: 8933
Зарегистрирован: 24.05.2007 17:23
Модель телефона: POCO X3 Pro 6/128
Прошивка: crDroid v7.7
Sat-ресивер: Tiviar Mini HD
Откуда: Данков
Контактная информация:

Re: Перехват Globax, Slonax 2/3G, Torrents и SkyDsl 8/9

Непрочитанное сообщение#706 » Blaze » 17.02.2010 21:15

Карта определяется, странно. Тут на форуме есть пользователи, у них такая же карта и она работает - мистика.

serg73
Начинающий
Начинающий
Сообщения: 8
Зарегистрирован: 16.01.2010 22:03
Откуда: харьков

Re: Перехват Globax, Slonax 2/3G, Torrents и SkyDsl 8/9

Непрочитанное сообщение#707 » serg73 » 18.02.2010 13:16

Здрвствуйте,хотелось бы узнать ваше мнение и может быть помощь. Я установил Sun VirtualBox и загрузил Mandriva Linux 2010. хотелось бы рыбачить с виртуального компа, как его соеденить с так сказать с нормальным компом счтобы запустить Skynet и что бы видно было диски. Заранее спасибо. Сергей Полтава

Kruizer
Интересующийся
Интересующийся
Сообщения: 10
Зарегистрирован: 23.12.2009 12:11
Откуда: Ростов

Re: Перехват Globax, Slonax 2/3G, Torrents и SkyDsl 8/9

Непрочитанное сообщение#708 » Kruizer » 18.02.2010 15:44

Всем хорош slax при загрузке с флешки-быстрая загрузка и диска ,вечно раскручивающегося не слышно,вот только не получается смотреть улов в линуксе(раньше при загрузке с диска все было нормально),дело в том что когда пытаюсь открыть папку Media выводится ошибка-"Не удается запустить процесс.Не удается создать вспомогательный процесс ввода/вывода.Подскажите, как можно решить эту проблему?

Аватара пользователя
Blaze
Информатик-аналитик
Информатик-аналитик
Сообщения: 8933
Зарегистрирован: 24.05.2007 17:23
Модель телефона: POCO X3 Pro 6/128
Прошивка: crDroid v7.7
Sat-ресивер: Tiviar Mini HD
Откуда: Данков
Контактная информация:

Re: Перехват Globax, Slonax 2/3G, Torrents и SkyDsl 8/9

Непрочитанное сообщение#709 » Blaze » 18.02.2010 16:48

Kruizer, во время загрузки выбирайте режим fresh mode и посмотрите (желательно загружать без дополнительных модулей).

serg73, виртуальная машина получается, пробовал я какой-то эмулятор и образ ubuntu - диски локальные не определила.

Kruizer
Интересующийся
Интересующийся
Сообщения: 10
Зарегистрирован: 23.12.2009 12:11
Откуда: Ростов

Re: Перехват Globax, Slonax 2/3G, Torrents и SkyDsl 8/9

Непрочитанное сообщение#710 » Kruizer » 20.02.2010 10:40

Спасибо,все получилось,файлы видны.Но есть еще одна проблема.После 3-суток рыбалки вышел из линукса в винду,но после загрузки операционки компьютер виснет намертво(предполагаю сильную фрагмантацию файлов).Снова гружу slax-все нормально,хард виден и файлы тоже.Подскажите,как сделать дефрагментацию жесткого диска в линуксе(в slax'e)

Ответить