Распаковка и запаковка img прошивок Android для Allwinner

[ZloyFenix]

пк не определяет его через кабель пишет неизвестное устройство и драйвера родные жевать не хочет.

Проверку цифровой подписи отключали и потом пробовали в Диспетчере устройств Windows вручную ставить драйвер - см. здесь?
Драйвера указать вручную из папки PhoenixSuitV1.10

Да. Пока что вернул назад в сервис. Пускай еще раз проверят USB. Сегодня-завтра отпишусь.

[ittnns]

Добрый день! Я долго не писал, так как пытался разобраться в прошивке.Исследования я проводил на прошивке 4g-ph_q8h_256_auto_gsl2681_rlest. Почему то только с ней корректно работал тач,ну все остальное включаю wifi, камеры не работали.Из нанд делал прошивку img, но когда начинал прошивать были ошибки Burn firmware failed! Please ensure the firmware file is valid and device work out correctly!
Я пишу к Вам, так как Вы специалист в устройствах, и наверное вы можете подсказать.
Правда, что в прошивке строго записан размер, к примеру data имеет определенный размер и он где то указывается?
Команда lsmod показывает модули,а можно как то, с помощью команд подключать или отключать модули, что бы понять какой из них не так работает? Я просто использовал способ написаны тут topic1232-650.html, но у меня не получилось,когда я брал и менял модули с другой прошивки, то планшет вообще не загружался и пришлось прошивать заново. Поэтому я и интересуюсь какая команда на лету подключает или отключает модули.С помощью тотала, какие папки посмотреть в планшете? Может там config или что то такое ,что отвечает за wifi и прочие модули. Может приложение не имеет к ним доступ, или они просто не загрузились .

[Blaze]

1. По вопросу Burn firmware failed! с неправильным подсчетом контрольной суммы обратитесь к RedScorpio - разработчику imgRePacker см. здесь

2. Проверку модулей можете сделать на примере скрипта

Код: Выделить всё

    #!/system/bin/sh
    #Выгружаем модули
    #Touchscreen
    rmmod /system/vendor/modules/gt811_ts.ko
    #G-sensor
    rmmod /system/vendor/modules/mc32x0.ko
    #Camera
    rmmod /system/vendor/modules/gc0308.ko

    #Загружаем свои модули
    insmod /system/vendor/modules/название модуля1.ko
    insmod /system/vendor/modules/название модуля2.ko
    insmod /system/vendor/modules/название модуля3.ko

rmmod выгружает модуль, а insmod загружает модуль.
Команды можно вводить прямо из Terminal Emulator for Android
Для этого необходимы root права. Пример

Код: Выделить всё

su
rmmod /system/vendor/modules/название модуля1.ko
insmod /system/vendor/modules/название модуля1.ko

[ittnns]

Добрый день !
За данное время попробовал сделать многое с девайсом, пишу что получилось. С помощью imgRePacker я все таки разместил модули так, как Вы писали. Спасибо. На той прошивке, что удалось собрать работает тач и wifi. Проблема только с блютуз ну и камеры ,ни какая не работает. Сейчас пытаюсь редактировать sysconfig1.lhs и init.rc.Честно пока что результата нету. В сети мало информации. Я действую при редактирование на угад.К примеру я ни как не пойму, как включить в файле камеры.
в

Код: Выделить всё

vip_dev0_mname           = ""

я пытался прописывать разные названия , но я не знаю везде надо писать название одной и той же камеры или разные, в устройстве две камеры.
в

Код: Выделить всё

port:PE00<2><default><default><default>

и прочие порты может надо что то писать, а что?
Я пишу параметры в программе DragonFace и потом заливаю то что делаю.я приведу тут то что написано в sysconfig1.lhs

;A23Q6(a70H) System configration
;---------------------------------------------------------------------------------------------------------
; port configuration:
; port_name = port:GPIO<mux><pull up/down><driver level><default value>
; mux: GPIO function configuration, 0-input, 1-output, 2+: special funciton for modules
; pull up/down: 1-pull up, 2-pull down
; driver level: 0,1,2,3. 2 is recommended
; default value: default output value when this IO is configured as an output IO
;---------------------------------------------------------------------------------------------------------

[product]
version = "100"
machine = "a23-a70H"

;---------------------------------------------------------------------------------------------------------
; eraseflag - 1 erase data partition, 0 - do not erase data partition
; next_work - action after burn, 0x0 by config, 0x1, normal, 0x2 reboot 0x3 ,shutdown,0x4 reupdate ,0x5 boot
;---------------------------------------------------------------------------------------------------------
[platform]
eraseflag = 1
next_work = 5

;----------------------------------------------------------------------------------
;[target] system bootup configuration
;boot_clock = CPU boot frequency, Unit: MHz
;storage_type = boot medium, 0-nand, 1-card0, 2-card2, -1(defualt)auto scan
;----------------------------------------------------------------------------------
[target]
boot_clock = 1008
storage_type = -1

;----------------------------------------------------------------------------------
;dcdc1_vol ---set dcdc1 voltage,mV,1600-3400,100mV/step
;dcdc2_vol ---set dcdc2 voltage,mV,600-1540,20mV/step
;dcdc3_vol ---set dcdc3 voltage,mV,600-1860,20mV/step
;dcdc4_vol ---set dcdc4 voltage,mV,600-1540,20mV/step
;dcdc5_vol ---set dcdc5 voltage,mV,1000-2550,50mV/step
;aldo2_vol ---set aldo2 voltage,mV,700-3300,100mV/step
;aldo3_vol ---set aldo3 voltage,mV,700-3300,100mV/step
;----------------------------------------------------------------------------------
[power_sply]
dcdc1_vol = 3000
dcdc2_vol = 1200
dcdc3_vol = 1260
dcdc4_vol = 0
dcdc5_vol = 1580
aldo2_vol = 2500
aldo3_vol = 3000

;----------------------------------------------------------------------------------
;card boot
;----------------------------------------------------------------------------------
[card_boot]
logical_start = 40960
sprite_gpio0 =

;----------------------------------------------------------------------------------
;[cardx_boot_para] boot card configuration
;card_ctrl = boot card NO. 0 or 2
;card_high_speed = speed mode, 0-normal mode(up to 25MHz), 1-high speed mode(up to 50MHz)
;card_line = boot card buswidth(1 or 4)
;----------------------------------------------------------------------------------
[card0_boot_para]
card_ctrl = 0
card_high_speed = 1
card_line = 4
sdc_d1 = port:PF0<2><1><2><default>
sdc_d0 = port:PF1<2><1><2><default>
sdc_clk = port:PF2<2><1><2><default>
sdc_cmd = port:PF3<2><1><2><default>
sdc_d3 = port:PF4<2><1><2><default>
sdc_d2 = port:PF5<2><1><2><default>

[card2_boot_para]
card_ctrl = 2
card_high_speed = 1
card_line = 4
sdc_clk = port:PC05<3><1><2><default>
sdc_cmd = port:PC06<3><1><2><default>
sdc_d0 = port:PC08<3><1><2><default>
sdc_d1 = port:PC09<3><1><2><default>
sdc_d2 = port:PC10<3><1><2><default>
sdc_d3 = port:PC11<3><1><2><default>

;----------------------------------------------------------------------------------
;[twi_para] twi for boot code
;twi_port = twi controller ID
;----------------------------------------------------------------------------------
[twi_para]
twi_port = 0
twi_scl = port:PH02<2><default><default><default>
twi_sda = port:PH03<2><default><default><default>

;----------------------------------------------------------------------------------
;[uart_para] boot debug port configuration
;uart_debug_port = uart port ID for boot debug
;----------------------------------------------------------------------------------
[uart_para]
uart_debug_port = 0
uart_debug_tx = port:PF02<3><1><default><default>
uart_debug_rx = port:PF04<3><1><default><default>

;----------------------------------------------------------------------------------
;[jtag_para] jtag configuration
;jtag_enable = 0-disable jtag, 1-enable jtag
;----------------------------------------------------------------------------------
[jtag_para]
jtag_enable = 0
jtag_ms = port:PF00<3><default><default><default>
jtag_ck = port:PF05<3><default><default><default>
jtag_do = port:PF03<3><default><default><default>
jtag_di = port:PF01<3><default><default><default>

;----------------------------------------------------------------------------------
;[clock] pll configuration
;----------------------------------------------------------------------------------
[clock]
pll3 = 297
pll4 = 300
pll6 = 600
pll8 = 408
pll9 = 480
pll10 = 468

;---------------------------------------------------------------------------------------------------------
;[pm_para] power management
;standby_mode = 0-normal standby, 1-super standby
;---------------------------------------------------------------------------------------------------------
[pm_para]
standby_mode = 1

;*****************************************************************************
;sdram configuration
;
;*****************************************************************************
[dram_para]
dram_clk = 432
dram_type = 3
dram_zq = 0xf74a
dram_odt_en = 1
dram_para1 = 0x1102400
dram_para2 = 0
dram_mr0 = 0x1A50
dram_mr1 = 0x4
dram_mr2 = 0x10
dram_mr3 = 0
dram_tpr0 = 0x2AB83DEF
dram_tpr1 = 0x18082356
dram_tpr2 = 0x34156
dram_tpr3 = 0x448C5533
dram_tpr4 = 0x08010D00
dram_tpr5 = 0x340B20F
dram_tpr6 = 0x20D118CC
dram_tpr7 = 0x14062485
dram_tpr8 = 0x220D1D52
dram_tpr9 = 0x1E078C22
dram_tpr10 = 0x3C
dram_tpr11 = 0
dram_tpr12 = 162
dram_tpr13 = 0x30000

;---------------------------------------------------------------------------------------------------------
; wakeup_src_para:
; sometimes, u would like to add more wakeup src in standby mode, these para will be
; help;
; u need to make sure the standby mode support the wakeup src. Also, some hw
; condition must be guaranteed.
; including:
; cpu_en: power on or off.
; 1: mean power on
; 0: mean power off
; cpu_freq: indicating lowest freq. unit is Mhz;
; dram selfresh_en: selfresh or not.
; 1: enable enter selfresh
; 0: disable enter selfresh
; dram_pll: if not enter selfresh, indicating lowest freq. unit is Mhz;
; wakeup_src: to make the scenario work, the wakeup src is needed.
;---------------------------------------------------------------------------------------------------------
[wakeup_src_para]
cpu_en = 0
cpu_freq = 48
; (cpu:apb:ahb)
pll_ratio = 0x111
dram_selfresh_en= 1
dram_freq = 36

;----------------------------------------------------------------------------------
;i2c configuration
; twi_used = twix enable
;----------------------------------------------------------------------------------
[twi0]
twi_used = 1
twi_scl = port:PH02<2><default><default><default>
twi_sda = port:PH03<2><default><default><default>

[twi1]
twi_used = 1
twi_scl = port:PH04<2><default><default><default>
twi_sda = port:PH05<2><default><default><default>

[twi2]
twi_used = 1
twi_scl = port:PE12<3><default><default><default>
twi_sda = port:PE13<3><default><default><default>


;----------------------------------------------------------------------------------
;uart configuration
;uart_used = uart x enable
;uart_type = 2:2 wire,4:4 wire,8:8 wire, full function
;----------------------------------------------------------------------------------
[uart0]
uart_used = 0
uart_port = 0
uart_type = 2
uart_tx = port:PF02<3><1><default><default>
uart_rx = port:PF04<3><1><default><default>

[uart1]
uart_used = 0
uart_type = 4
uart_tx = port:PG06<2><1><default><default>
uart_rx = port:PG07<2><1><default><default>
uart_rts = port:PG08<2><1><default><default>
uart_cts = port:PG09<2><1><default><default>

[uart2]
uart_used = 0
uart_type = 4
uart_tx = port:PB00<2><1><default><default>
uart_rx = port:PB01<2><1><default><default>
uart_rts = port:PB02<2><1><default><default>
uart_cts = port:PB03<2><1><default><default>

[uart3]
uart_used = 0
uart_type = 4
uart_tx = port:PH06<3><1><default><default>
uart_rx = port:PH07<3><1><default><default>
uart_rts = port:PH08<3><1><default><default>
uart_cts = port:PH09<3><1><default><default>

[uart4]
uart_used = 0
uart_port = 4
uart_type = 2
uart_tx = port:PA04<2><1><default><default>
uart_rx = port:PA05<2><1><default><default>
uart_rts = port:PA06<2><1><default><default>
uart_cts = port:PA07<2><1><default><default>

;----------------------------------------------------------------------------------
;SPI controller configuration
;spi_used = SPIx enable
;spi_cs_bitmap = SPI bit mapping
;----------------------------------------------------------------------------------
[spi0]
spi_used = 0
spi_cs_bitmap = 1
spi_mosi = port:PC00<3><default><default><default>
spi_miso = port:PC01<3><default><default><default>
spi_sclk = port:PC02<3><default><default><default>
spi_cs0 = port:PC03<3><1><default><default>

[spi1]
spi_used = 0
spi_cs_bitmap = 1
spi_cs0 = port:PA00<2><1><default><default>
spi_sclk = port:PA01<2><default><default><default>
spi_mosi = port:PA02<2><default><default><default>
spi_miso = port:PA03<2><default><default><default>

;----------------------------------------------------------------------------------
;SPI device configuration
;spi_dev_num: number of spi devices
;----------------------------------------------------------------------------------
[spi_devices]
spi_dev_num = 0

;----------------------------------------------------------------------------------
;[spi_board0] spi device configuration
;modalias = spi device name
;max_speed_hz = max transfer speed
;bus_num = bus ID
;chip_select = chip select, 0,1
;mode = SPI transfer mode
;----------------------------------------------------------------------------------
[spi_board0]
modalias = "at25df641"
max_speed_hz = 50000000
bus_num = 0
chip_select = 0
mode = 0


;----------------------------------------------------------------------------------
;capacitor tp configuration
;ctp_twi_id : twi controller ID
;ctp_twi_addr : I2C slave address, 7bit
;ctp_screen_max_x/_y : resolution of touch panel
;ctp_revert_x/_y_flag : whether need to revert x/y
;ctp_exchange_x_y_flag: whether need to exchange the value of x and y
;ctp_int_port : port for tp's interrupt signal
;ctp_wakeup : port for wakeup tp
;----------------------------------------------------------------------------------
[ctp_para]
ctp_used = 1
ctp_name = "gsl3675"
ctp_twi_id = 0
ctp_twi_addr = 0x40
ctp_screen_max_x = 800
ctp_screen_max_y = 480
ctp_revert_x_flag = 0
ctp_revert_y_flag = 1
ctp_exchange_x_y_flag = 1

ctp_int_port = port:PB05<4><default><default><default>
ctp_wakeup = port:PH01<1><default><default><1>

;--------------------------------------------------------------------------------
; CTP automatic detection configuration
;ctp_detect_used --- Whether startup automatic inspection function. 1:used,0:unused
;Module name postposition 1 said detection, 0 means no detection.
;--------------------------------------------------------------------------------
[ctp_list_para]
ctp_det_used = 1
ft5x_ts = 1
gt82x = 1
gslX680 = 1
gslX680new = 0
gt9xx_ts = 1
gt9xxf_ts = 0
tu_ts = 0
gt818_ts = 1
zet622x = 1
aw5306_ts = 1
icn83xx_ts = 0
;----------------------------------------------------------------------------------
;touch key configuration
;tkey_twi_id : twi controller ID
;tkey_twi_addr : I2C slave address, 7bit
;tkey_int : port for touch key's interrupt signal
;----------------------------------------------------------------------------------
[tkey_para]
tkey_used = 0
tkey_twi_id =
tkey_twi_addr =
tkey_int =

;----------------------------------------------------------------------------------
;motor configuration
;motor_shake : port for making the moto shaking
;----------------------------------------------------------------------------------
[motor_para]
motor_used = 0
motor_shake =
motor_ldo = axp22_dldo4
motor_ldo_voltage = 3300

;----------------------------------------------------------------------------------
;thermal configuration
;----------------------------------------------------------------------------------
[ths_para]
ths_used = 1

;----------------------------------------------------------------------------------
;[nandx_para]
;nand_support_2ch = support dual channel
;nand0_used = nand0
;----------------------------------------------------------------------------------
[nand0_para]
nand_support_2ch = 0

nand0_used = 0
nand0_we = port:PC00<2><default><default><default>
nand0_ale = port:PC01<2><default><default><default>
nand0_cle = port:PC02<2><default><default><default>
nand0_ce1 = port:PC03<2><default><default><default>
nand0_ce0 = port:PC04<2><default><default><default>
nand0_nre = port:PC05<2><default><default><default>
nand0_rb0 = port:PC06<2><default><default><default>
nand0_rb1 = port:PC07<2><default><default><default>
nand0_d0 = port:PC08<2><default><default><default>
nand0_d1 = port:PC09<2><default><default><default>
nand0_d2 = port:PC10<2><default><default><default>
nand0_d3 = port:PC11<2><default><default><default>
nand0_d4 = port:PC12<2><default><default><default>
nand0_d5 = port:PC13<2><default><default><default>
nand0_d6 = port:PC14<2><default><default><default>
nand0_d7 = port:PC15<2><default><default><default>
nand0_ndqs = port:PC16<2><default><default><default>
nand0_ce2 = port:PC17<2><default><default><default>
nand0_ce3 = port:PC18<2><default><default><default>

;----------------------------------------------------------------------------------
;disp init configuration
;
;disp_mode (0:screen0<screen0,fb0>)
;screenx_output_type (0:none; 1:lcd; 3:hdmi;)
;screenx_output_mode (used for hdmi output, 0:480i 1:576i 2:480p 3:576p 4:720p50)
; (5:720p60 6:1080i50 7:1080i60 8:1080p24 9:1080p50 10:1080p60)
;fbx format (4:RGB655 5:RGB565 6:RGB556 7:ARGB1555 8:RGBA5551 9:RGB888 10:ARGB8888 12:ARGB4444)
;fbx pixel sequence (0:ARGB 1:BGRA 2:ABGR 3:RGBA)
;fb0_scaler_mode_enable(scaler mode enable, used FE)
;fbx_width,fbx_height (framebuffer horizontal/vertical pixels, fix to output resolution while equal 0)
;lcdx_backlight (lcd init backlight,the range:[0,256],default:197
;lcdx_yy (lcd init screen bright/contrast/saturation/hue, value:0~100, default:50/50/57/50)
;lcd0_contrast (LCD contrast, 0~100)
;lcd0_saturation (LCD saturation, 0~100)
;lcd0_hue (LCD hue, 0~100)
;----------------------------------------------------------------------------------
[disp_init]
disp_init_enable = 1
disp_mode = 0

screen0_output_type = 1
screen0_output_mode = 4

screen1_output_type = 1
screen1_output_mode = 4

fb0_format = 10
fb0_pixel_sequence = 0
fb0_scaler_mode_enable = 0
fb0_width = 0
fb0_height = 0

fb1_format = 10
fb1_pixel_sequence = 0
fb1_scaler_mode_enable = 0
fb1_width = 0
fb1_height = 0

lcd0_backlight = 197
lcd1_backlight = 197

lcd0_bright = 50
lcd0_contrast = 50
lcd0_saturation = 57
lcd0_hue = 50

lcd1_bright = 50
lcd1_contrast = 50
lcd1_saturation = 57
lcd1_hue = 50

;----------------------------------------------------------------------------------
;lcd0 configuration

;lcd_if: 0:hv(sync+de); 1:8080; 2:ttl; 3:lvds; 4:dsi; 5:edp; 6:extend dsi
;lcd_x: lcd horizontal resolution
;lcd_y: lcd vertical resolution
;lcd_width: width of lcd in mm
;lcd_height: height of lcd in mm
;lcd_dclk_freq: in MHZ unit
;lcd_pwm_freq: in HZ unit
;lcd_pwm_pol: lcd backlight PWM polarity
;lcd_pwm_max_limit lcd backlight PWM max limit(<=255)
;lcd_hbp: hsync back porch
;lcd_ht: hsync total cycle
;lcd_vbp: vsync back porch
;lcd_vt: vysnc total cycle
;lcd_hspw: hsync plus width
;lcd_vspw: vysnc plus width
;lcd_lvds_if: 0:single link; 1:dual link
;lcd_lvds_colordepth: 0:8bit; 1:6bit
;lcd_lvds_mode: 0:NS mode; 1:JEIDA mode
;lcd_frm: 0:disable; 1:enable rgb666 dither; 2:enable rgb656 dither
;lcd_io_phase: 0:noraml; 1:intert phase(0~3bit: vsync phase; 4~7bit:hsync phase;
; 8~11bit:dclk phase; 12~15bit:de phase)
;lcd_gamma_en lcd gamma correction enable
;lcd_bright_curve_en lcd bright curve correction enable
;lcd_cmap_en lcd color map function enable
;deu_mode 0:smoll lcd screen; 1:large lcd screen(larger than 10inch)
;lcdgamma4iep: Smart Backlight parameter, lcd gamma vale * 10;
; decrease it while lcd is not bright enough; increase while lcd is too bright
;smart_color 90:normal lcd screen 65:retina lcd screen(9.7inch)
;----------------------------------------------------------------------------------
[lcd0_para]
lcd_used = 1

lcd_driver_name = "default_lcd"
lcd_if = 0
lcd_x = 800
lcd_y = 480
lcd_width = 0
lcd_height = 0
lcd_dclk_freq = 33
lcd_pwm_used = 1
lcd_pwm_ch = 0
lcd_pwm_freq = 50000
lcd_pwm_pol = 0
lcd_hbp = 46
lcd_ht = 1055
lcd_hspw = 0
lcd_vbp = 23
lcd_vt = 525
lcd_vspw = 0
lcd_lvds_if = 0
lcd_lvds_colordepth = 0
lcd_lvds_mode = 0
lcd_frm = 1
lcd_io_phase = 0x0000
lcd_gamma_en = 0
lcd_bright_curve_en = 0
lcd_cmap_en = 0

deu_mode = 0
lcdgamma4iep = 22
smart_color = 90

lcd_gpio_0 = port:PH07<1><0><default><1>
lcd_bl_en = port:PH06<1><0><default><1>
lcd_power = port:power2<1><0><default><1>

lcdd0 = port:PD00<2><0><default><default>
lcdd1 = port:PD01<2><0><default><default>
lcdd2 = port:PD02<2><0><default><default>
lcdd3 = port:PD03<2><0><default><default>
lcdd4 = port:PD04<2><0><default><default>
lcdd5 = port:PD05<2><0><default><default>
lcdd6 = port:PD06<2><0><default><default>
lcdd7 = port:PD07<2><0><default><default>
lcdd8 = port:PD08<2><0><default><default>
lcdd9 = port:PD09<2><0><default><default>
lcdd10 = port:PD10<2><0><default><default>
lcdd11 = port:PD11<2><0><default><default>
lcdd12 = port:PD12<2><0><default><default>
lcdd13 = port:PD13<2><0><default><default>
lcdd14 = port:PD14<2><0><default><default>
lcdd15 = port:PD15<2><0><default><default>
lcdd16 = port:PD16<2><0><default><default>
lcdd17 = port:PD17<2><0><default><default>
lcdd18 = port:PD18<2><0><default><default>
lcdd19 = port:PD19<2><0><default><default>
lcdd20 = port:PD20<2><0><default><default>
lcdd21 = port:PD21<2><0><default><default>
lcdd22 = port:PD22<2><0><default><default>
lcdd23 = port:PD23<2><0><default><default>
lcdclk = port:PD24<2><0><default><default>
lcdde = port:PD25<2><0><default><default>
lcdhsync = port:PD26<2><0><default><default>
lcdvsync = port:PD27<2><0><default><default>

;----------------------------------------------------------------------------------
;pwm config
;----------------------------------------------------------------------------------
[pwm0_para]
pwm_used = 1
pwm_positive = port:PH00<2><0><default><default>

[pwm1_para]
pwm_used = 0
pwm_positive = port:PH01<2><0><default><default>

;--------------------------------------------------------------------------------
;vip (video input port) configuration
;vip_used: 0:disable 1:enable
;vip_mode: 0:sample one interface to one buffer 1:sample two interface to one buffer
;vip_dev_qty: The quantity of devices linked to capture bus
;vip_dev(x)_isp_used 0: not use isp 1:use isp
;vip_dev(x)_fmt: 0:yuv 1:bayer raw rgb
;vip_dev(x)_stby_mode: 0:not shut down power at standby 1:shut down power at standby
;vip_dev(x)_vflip: flip in vertical direction 0:disable 1:enable
;vip_dev(x)_hflip: flip in horizontal direction 0:disable 1:enable
;vip_dev(x)_iovdd: camera module io power handle string, pmu power supply
;vip_dev(x)_iovdd_vol: camera module io power voltage, pmu power supply
;vip_dev(x)_avdd: camera module analog power handle string, pmu power supply
;vip_dev(x)_avdd_vol: camera module analog power voltage, pmu power supply
;vip_dev(x)_dvdd: camera module core power handle string, pmu power supply
;vip_dev(x)_dvdd_vol: camera module core power voltage, pmu power supply
;vip_dev(x)_afvdd: camera module vcm power handle string, pmu power supply
;vip_dev(x)_afvdd_vol: camera module vcm power voltage, pmu power supply
;x indicates the index of the devices which are linked to the same capture bus
;fill voltage in uV, e.g. iovdd = 2.8V, vip_devx_iovdd_vol = 2800000
;fill handle string as below:
;axp22_eldo3
;axp22_dldo4
;axp22_eldo2
;fill handle string "" when not using any pmu power supply
;--------------------------------------------------------------------------------

[csi0]

vip_used = 1
vip_mode = 0
vip_dev_qty = 2
vip_csi_pck = port:PE00<2><default><default><default>
vip_csi_mck = port:PE01<2><default><default><default>
vip_csi_hsync = port:PE02<2><default><default><default>
vip_csi_vsync = port:PE03<2><default><default><default>
vip_csi_d0 = port:PE04<2><default><default><default>
vip_csi_d1 = port:PE05<2><default><default><default>
vip_csi_d2 = port:PE06<2><default><default><default>
vip_csi_d3 = port:PE07<2><default><default><default>
vip_csi_d4 = port:PE08<2><default><default><default>
vip_csi_d5 = port:PE09<2><default><default><default>
vip_csi_d6 = port:PE10<2><default><default><default>
vip_csi_d7 = port:PE11<2><default><default><default>

vip_dev0_mname = "gc0309"
vip_dev0_lane = 1
vip_dev0_twi_id = 2
vip_dev0_twi_addr = 0x42
vip_dev0_isp_used = 0
vip_dev0_fmt = 0
vip_dev0_stby_mode = 0
vip_dev0_vflip = 0
vip_dev0_hflip = 0
vip_dev0_iovdd = "axp22_dldo3"
vip_dev0_iovdd_vol = 2800000
vip_dev0_avdd = "axp22_ldoio0"
vip_dev0_avdd_vol = 2800000
vip_dev0_dvdd = "axp22_eldo2"
vip_dev0_dvdd_vol = 1800000
vip_dev0_afvdd = ""
vip_dev0_afvdd_vol = 2800000
vip_dev0_power_en =
vip_dev0_reset = port:PE14<1><default><default><0>
vip_dev0_pwdn = port:PE17<1><default><default><1>
vip_dev0_flash_en = port:PB00<1><default><default><0>
vip_dev0_flash_mode =
vip_dev0_af_pwdn =


vip_dev1_mname = "gc0309"
vip_dev1_lane = 1
vip_dev1_twi_id = 2
vip_dev1_twi_addr = 0x42
vip_dev1_isp_used = 0
vip_dev1_fmt = 0
vip_dev1_stby_mode = 0
vip_dev1_vflip = 0
vip_dev1_hflip = 0
vip_dev1_iovdd = "axp22_dldo3"
vip_dev1_iovdd_vol = 2800000
vip_dev1_avdd = "axp22_ldoio0"
vip_dev1_avdd_vol = 2800000
vip_dev1_dvdd = "axp22_eldo2"
vip_dev1_dvdd_vol = 1800000
vip_dev1_afvdd = ""
vip_dev1_afvdd_vol = 2800000
vip_dev1_power_en =
vip_dev1_reset = port:PE16<1><default><default><0>
vip_dev1_pwdn = port:PE15<1><default><default><1>
vip_dev1_flash_en = port:PB00<1><default><default><0>
vip_dev1_flash_mode =
vip_dev1_af_pwdn =
[camera_list_para]
camera_list_para_used = 0
ov7670 = 0
gc0308 = 1
gt2005 = 0
hi704 = 0
sp0838 = 0
mt9m112 = 0
mt9m113 = 0
gc2035 = 1
ov2655 = 0
hi253 = 1
gc0307 = 0
mt9d112 = 0
ov5640 = 0
ov5647 = 0
gc2015 = 0
ov2643 = 0
gc0329 = 0
gc0309 = 0
s5k4ec = 0
siv121d = 0


;-------------------------------------------------------------------------------
; mmc configuration
;
; Config Guide
; sdc_used: 1-enable card, 0-disable card
; sdc_detmode: card detect mode
; 1-detect card by gpio polling
; 2-detect card by gpio irq(must use IO with irq function)
; 3-no detect, always in for boot card
; 4-manually insert and remove by /proc/driver/sunxi-mmc.x/insert
; sdc_buswidth: card bus width, 1-1bit, 4-4bit, 8-8bit
; sdc_use_wp: 1-with write protect IO, 0-no write protect IO
; sdc_isio: for sdio card
; sdc_regulator: power control.if card supports UHS-I/DDR and HS200 timing for
; SD3.0 or eMMC4.5, regulator must be configured. the value is
; the ldo name of AXP221, eg: sdc_regulator = "axp22_eldo2"
; other: GPIO Mapping configuration
;
; Note:
; 1 if detmode=2, sdc_det's config=6
; else if detmode=1, sdc_det's config=0
; else sdc_det IO is not necessary
; 2 if the customer wants to support UHS-I and HS200 features, he must provide
; an independent power supply for the card. This is only used in platforms
; that supports SD3.0 cards and eMMC4.4+ flashes
;-------------------------------------------------------------------------------
[mmc0_para]
sdc_used = 1
sdc_detmode = 2
sdc_buswidth = 4
sdc_d1 = port:PF00<2><1><2><default>
sdc_d0 = port:PF01<2><1><2><default>
sdc_clk = port:PF02<2><1><2><default>
sdc_cmd = port:PF03<2><1><2><default>
sdc_d3 = port:PF04<2><1><2><default>
sdc_d2 = port:PF05<2><1><2><default>
sdc_det = port:PB04<4><1><2><default>
sdc_use_wp = 0
sdc_wp =
sdc_isio = 0
sdc_regulator = "none"

[mmc1_para]
sdc_used = 1
sdc_detmode = 4
sdc_buswidth = 4
sdc_clk = port:PG00<2><1><0><default>
sdc_cmd = port:PG01<2><1><3><default>
sdc_d0 = port:PG02<2><1><3><default>
sdc_d1 = port:PG03<2><1><3><default>
sdc_d2 = port:PG04<2><1><3><default>
sdc_d3 = port:PG05<2><1><3><default>
sdc_det =
sdc_use_wp = 0
sdc_wp =
sdc_isio = 1
sdc_regulator = "none"

[mmc2_para]
sdc_used = 0
sdc_detmode = 3
sdc_buswidth = 8
sdc_clk = port:PC05<3><1><2><default>
sdc_cmd = port:PC06<3><1><2><default>
sdc_d0 = port:PC08<3><1><2><default>
sdc_d1 = port:PC09<3><1><2><default>
sdc_d2 = port:PC10<3><1><2><default>
sdc_d3 = port:PC11<3><1><2><default>
sdc_d4 = port:PC12<3><1><2><default>
sdc_d5 = port:PC13<3><1><2><default>
sdc_d6 = port:PC14<3><1><2><default>
sdc_d7 = port:PC15<3><1><2><default>
emmc_rst = port:PC16<3><1><2><default>
sdc_det =
sdc_use_wp = 0
sdc_wp =
sdc_isio = 0
sdc_regulator = "none"

;----------------------------------------------------------------------------------
;usb configuration
;usb_used: usb controller enable, 0-disable, 1-enable
;usb_port_type: usb mode: 0-device, 1-host, 2-otg
;usb_detect_type: usb hotplug detect mode, 0-none, 1-vbus/id detect, 2-id/dpdm detect
;usb_id_gpio: usb id detect IO
;usb_det_vbus_gpio: usb vbus detect IO, "axp_ctrl" for axp
;usb_drv_vbus_gpio: usb dirve vbus IO
;usb_restrict_gpio: usb current restrict IO
;usb_restric_flag: usb current restrict flag
;----------------------------------------------------------------------------------
[usbc0]
usb_used = 1
usb_port_type = 2
usb_detect_type = 1
usb_id_gpio = port:PH8<0><1><default><default>
usb_det_vbus_gpio = "axp_ctrl"
usb_drv_vbus_gpio = port:power4<1><0><default><0>
usb_restrict_gpio =
usb_host_init_state = 0
usb_restric_flag = 0
usb_restric_voltage = 3550000
usb_restric_capacity= 5

[usbc1]
usb_used = 1
usb_port_type = 1
usb_detect_type = 0
usb_id_gpio =
usb_det_vbus_gpio =
usb_drv_vbus_gpio =
usb_restrict_gpio =
usb_host_init_state = 1
usb_restric_flag = 0


;----------------------------------------------------------------------------------

; USB Device vendor Info.
;----------------------------------------------------------------------------------
[usb_feature]
vendor_id = 0x1F3A
mass_storage_id = 0x1000
adb_id = 0x1001

manufacturer_name = "USB Developer"
product_name = "Android"
serial_number = "20080411"

[msc_feature]
vendor_name = "USB 2.0"
product_name = "USB Flash Driver"
release = 100
luns = 2

;--------------------------------------------------------------------------------
; G sensor configuration
; gs_twi_id --- TWI ID for controlling Gsensor (0: TWI0, 1: TWI1, 2: TWI2)
;--------------------------------------------------------------------------------
[gsensor_para]
gsensor_used = 1
gsensor_twi_id = 1
gsensor_twi_addr = 0x18
gsensor_int1 = port:PB06<4><1><default><default>
gsensor_int2 =

;--------------------------------------------------------------------------------
; G sensor automatic detection configuration
;gsensor_detect_used --- Whether startup automatic inspection function. 1:used,0:unused
;Module name postposition 1 said detection, 0 means no detection.
;--------------------------------------------------------------------------------
[gsensor_list_para]
gsensor_det_used = 1
bma250 = 0
stk831x = 0
mma8452 = 1
mma7660 = 1
mma865x = 1
afa750 = 1
lis3de_acc = 1
lis3dh_acc = 1
kxtik = 1
dmard10 = 1
dmard06 = 1
mxc622x = 1
fxos8700 = 1
lsm303d = 1

;--------------------------------------------------------------------------------
; gps gpio configuration
; gps_spi_id: the index of SPI controller. 0: SPI0, 1: SPI1, 2: SPI2, 15: no SPI used
; gps_spi_cs_num: the chip select number of SPI controller. 0: SPI CS0, 1: SPI CS1
; gps_lradc: the lradc number for GPS used. 0 and 1 is valid, set 2 if not use lradc
;--------------------------------------------------------------------------------
[gps_para]
;--------------------------------------------------------------------------------
;gpio i2c for RDA WIFI
[i2c_gpio_para]
i2c_gpio_used = 1
i2c_gpio_scl = port:PL10<2><default><default><default>
i2c_gpio_sda = port:PL06<2><default><default><default>
;--------------------------------------------------------------------------------
;wifi configuration
;wifi_sdc_id: 0- SDC0, 1- SDC1, 2- SDC2, 3- SDC3
;wifi_usbc_id: 0- USB0, 1- USB1, 2- USB2
;wifi_usbc_type: 1- EHCI(speed 2.0), 2- OHCI(speed 1.0)
;wifi_mod_sel: 0- none, 1- ap6181, 2- ap6210(wifi+bt),
; 3 - rtl8188eu, 4- rtl8723au(wifi+bt),
; 5 - rtl8723bs
;--------------------------------------------------------------------------------
[wifi_para]
wifi_used = 1
wifi_sdc_id = 1
wifi_usbc_id = 1
wifi_usbc_type = 1
wifi_mod_sel = 6
wifi_power = "axp22_dldo1"
wifi_power_ext1 = ""
wifi_power_ext2 = ""

rda5990_wl_host_wake = port:PL07<4><default><default><0>
rda5990_bt_host_wake = port:PL09<4><default><default><0>
rda5990_lpo_use_apclk = 1

;--------------------------------------------------------------------------------
;blue tooth
;bt_used ---- blue tooth used (0- no used, 1- used)
;bt_uard_id ---- uart index
;--------------------------------------------------------------------------------
[bt_para]
bt_used = 1
bt_uart_id = 1

;--------------------------------------------------------------------------------
;3G configuration
;--------------------------------------------------------------------------------
[3g_para]
3g_used = 0
3g_usbc_num = 1
3g_uart_num = 2
bb_name = ""
bb_vbat =
bb_on =
bb_pwr_on = port:PL03<1><default><default><0>
bb_wake = port:PL04<1><default><default><0>
bb_rf_dis = port:PL11<1><default><default><0>
bb_rst = port:PL05<1><default><default><0>
bb_dldo = ""
bb_dldo_min_uV = 2800000
bb_dldo_max_uV = 2800000

;--------------------------------------------------------------------------------
;gyroscope
;--------------------------------------------------------------------------------
[gy_para]
gy_used = 0
gy_twi_id = 1
gy_twi_addr = 0x6a
gy_int1 =
gy_int2 =

;--------------------------------------------------------------------------------
; Gyro automatic detection configuration
;gy_detect_used --- Whether startup automatic inspection function. 1:used,0:unused
;Module name postposition 1 said detection, 0 means no detection.
;--------------------------------------------------------------------------------
[gy_list_para]
gy_det_used = 1
l3gd20_gyr = 1

;--------------------------------------------------------------------------------
;light sensor
;--------------------------------------------------------------------------------
[ls_para]
ls_used = 0
ls_twi_id = 1
ls_twi_addr = 0x23
ls_int = port:PB07<4><1><default><default>

;--------------------------------------------------------------------------------
; lsensor automatic detection configuration
;ls_detect_used --- Whether startup automatic inspection function. 1:used,0:unused
;Module name postposition 1 said detection, 0 means no detection.
;--------------------------------------------------------------------------------
[ls_list_para]
ls_det_used = 1
ltr_501als = 1
jsa1212 = 1
;--------------------------------------------------------------------------------
;compass
;--------------------------------------------------------------------------------
[compass_para]
compass_used = 0
compass_twi_id = 1
compass_twi_addr = 0x0d
compass_int =

;--------------------------------------------------------------------------------
;i2s_master:1: SND_SOC_DAIFMT_CBM_CFM(codec clk & FRM master) use
; 2: SND_SOC_DAIFMT_CBS_CFM(codec clk slave & FRM master) not use
; 3: SND_SOC_DAIFMT_CBM_CFS(codec clk master & frame slave) not use
; 4: SND_SOC_DAIFMT_CBS_CFS(codec clk & FRM slave) use
;i2s_select:0 is pcm.1 is i2s
;audio_format: 1:SND_SOC_DAIFMT_I2S(standard i2s format). use
; 2:SND_SOC_DAIFMT_RIGHT_J(right justfied format).
; 3:SND_SOC_DAIFMT_LEFT_J(left justfied format)
; 4:SND_SOC_DAIFMT_DSP_A(pcm. MSB is available on 2nd BCLK rising edge after LRC rising edge). use
; 5:SND_SOC_DAIFMT_DSP_B(pcm. MSB is available on 1nd BCLK rising edge after LRC rising edge)
;signal_inversion:1:SND_SOC_DAIFMT_NB_NF(normal bit clock + frame) use
; 2:SND_SOC_DAIFMT_NB_IF(normal BCLK + inv FRM)
; 3:SND_SOC_DAIFMT_IB_NF(invert BCLK + nor FRM) use
; 4:SND_SOC_DAIFMT_IB_IF(invert BCLK + FRM)
;over_sample_rate: support 128fs/192fs/256fs/384fs/512fs/768fs
;sample_resolution :16bits/20bits/24bits
;word_select_size :16bits/20bits/24bits/32bits
;pcm_sync_period :16/32/64/128/256
;msb_lsb_first :0: msb first; 1: lsb first
;sign_extend :0: zero pending; 1: sign extend
;slot_index :slot index: 0: the 1st slot - 3: the 4th slot
;slot_width :8 bit width / 16 bit width
;frame_width :0: long frame = 2 clock width; 1: short frame
;tx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
;rx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
;--------------------------------------------------------------------------------
[i2s0]
i2s_used = 0
i2s_channel = 2
i2s_master = 1
i2s_select = 0
audio_format = 4
signal_inversion = 3
over_sample_rate = 256
sample_resolution = 16
word_select_size = 32
pcm_sync_period = 256
msb_lsb_first = 0
sign_extend = 0
slot_index = 0
slot_width = 16
frame_width = 1
tx_data_mode = 0
rx_data_mode = 0
i2s_mclk =
i2s_bclk = port:PB04<2><1><default><default>
i2s_lrclk = port:PB05<2><1><default><default>
i2s_dout0 = port:PB06<2><1><default><default>
i2s_dout1 =
i2s_dout2 =
i2s_dout3 =
i2s_din = port:PB07<2><1><default><default>

;--------------------------------------------------------------------------------
;pcm_master:1: SND_SOC_DAIFMT_CBM_CFM(codec clk & FRM master) use
; 2: SND_SOC_DAIFMT_CBS_CFM(codec clk slave & FRM master) not use
; 3: SND_SOC_DAIFMT_CBM_CFS(codec clk master & frame slave) not use
; 4: SND_SOC_DAIFMT_CBS_CFS(codec clk & FRM slave) use
;pcm_select:1 is pcm.0 is i2s
;audio_format: 1:SND_SOC_DAIFMT_I2S(standard i2s format). use
; 2:SND_SOC_DAIFMT_RIGHT_J(right justfied format).
; 3:SND_SOC_DAIFMT_LEFT_J(left justfied format)
; 4:SND_SOC_DAIFMT_DSP_A(pcm. MSB is available on 2nd BCLK rising edge after LRC rising edge). use
; 5:SND_SOC_DAIFMT_DSP_B(pcm. MSB is available on 1nd BCLK rising edge after LRC rising edge)
;signal_inversion:1:SND_SOC_DAIFMT_NB_NF(normal bit clock + frame) use
; 2:SND_SOC_DAIFMT_NB_IF(normal BCLK + inv FRM)
; 3:SND_SOC_DAIFMT_IB_NF(invert BCLK + nor FRM) use
; 4:SND_SOC_DAIFMT_IB_IF(invert BCLK + FRM)
;over_sample_rate: support 128fs/192fs/256fs/384fs/512fs/768fs
;sample_resolution :16bits/20bits/24bits
;word_select_size :16bits/20bits/24bits/32bits
;pcm_sync_period :16/32/64/128/256
;msb_lsb_first :0: msb first; 1: lsb first
;sign_extend :0: zero pending; 1: sign extend
;slot_index :slot index: 0: the 1st slot - 3: the 4th slot
;slot_width :8 bit width / 16 bit width
;frame_width :0: long frame = 2 clock width; 1: short frame
;tx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
;rx_data_mode :0: 16bit linear PCM; 1: 8bit linear PCM; 2: 8bit u-law; 3: 8bit a-law
;--------------------------------------------------------------------------------
[i2s1]
pcm_used = 0
pcm_channel = 2
pcm_master = 4
pcm_select = 1
audio_format = 4
signal_inversion = 3
over_sample_rate = 512
sample_resolution = 16
word_select_size = 32
pcm_sync_period = 64
msb_lsb_first = 0
sign_extend = 0
slot_index = 0
slot_width = 16
frame_width = 1
tx_data_mode = 0
rx_data_mode = 0
pcm_mclk =
pcm_bclk = port:PD14<3><1><default><default>
pcm_lrclk = port:PD15<3><1><default><default>
pcm_dout = port:PD16<3><1><default><default>
pcm_din = port:PD17<3><1><default><default>

;--------------------------------------------------------------------------------
;pa_single_vol,pa_double_vol: 63 level,1.5db/step.0x3f is the large volume.
;cap_vol:use for system record,0x0--0db,0x1--24db,0x2--27db,0x3--30db,0x4--33db,0x5--36db,0x6--39db,0x7--42db
;headphone_vol: must =< 0x3f. 0x1 is a step.
;digital_vol: 0x2~0x6. When pa_double_used=0, it works.If sin wave lost its shape, you can adjust it.
;headset_mic_vol: headset mic(mic2) vol,use for phone headset mic call
;main_mic_vol: main mic(mic1) vol,use for phone main mic call, 0x0~0x7
;pa_double_used: 0 stand for difference, and 1 is single signal.
;--------------------------------------------------------------------------------
[audio0]
audio_used = 1
audio_hp_ldo = "none"
headphone_vol = 0x3b
cap_vol = 0x5
digital_vol = 0x3
pa_single_vol = 0x3e
pa_double_used = 0
pa_double_vol = 0x3e
headphone_direct_used = 1
audio_pa_ctrl = port:PH09<1><default><default><0>
headphone_mute_used = 0
audio_mute_ctrl =
headset_mic_vol = 6
main_mic_vol = 2

;-------------------------------------------------------------------------------------
;pmu_used ---0:not used,1:used
;pmu_twi_addr ---slave address
;pmu_twi_id ---i2c bus number (0 TWI0, 1 TWI2, 2 TWI3)
;pmu_irq_id ---irq number (0 irq0,1 irq1,Ў­Ў­)
;pmu_battery_rdc ---battery initial resistance
;pmu_battery_cap ---battery capability,mAh
;pmu_batdeten ---battery detect en;0:disable 1:enable
;pmu_runtime_chgcur ---set initial charging current limite,mAЈ¬300/450/600/750/900/1050/1200/1350/1500/1650/1800/1950/
;pmu_earlysuspend_chgcur ---set earlysuspend charging current limite,mAЈ¬300/450/600/750/900/1050/1200/1350/1500/1650/1800/1950/
;pmu_suspend_chgcur ---set suspend charging current limite,mAЈ¬300/450/600/750/900/1050/1200/1350/1500/1650/1800/1950/
;pmu_shutdown_chgcur ---set shutdown charging current limite,mAЈ¬300/450/600/750/900/1050/1200/1350/1500/1650/1800/1950/
;pmu_init_chgvol ---set initial charing target voltage,mV,4100/4220/4200/4240
;pmu_init_chgend_rate ---set initial charing end current rate,10/15
;pmu_init_chg_enabled ---set initial charing enabled,0:disable,1:enable
;pmu_init_adc_freq ---set initial adc frequency,Hz,100/200/400/800
;pmu_init_adcts_freq ---set initial adc TS,Hz,100/200/400/800
;pmu_init_chg_pretime ---set initial pre-charging time,min,40/50/60/70
;pmu_init_chg_csttime ---set initial constance-charging time,min,360/480/600/720
;pmu_batt_cap_correct ---correct the battery capacity or not when one charge cycle 0:not correct 1:correct
;pmu_bat_regu_en ---bat regulator is enable or not when charge done 0:disable 1:enable
;pmu_bat_para1 ---battery indication at 3.13V
;pmu_bat_para2 ---battery indication at 3.27V
;pmu_bat_para3 ---battery indication at 3.34V
;pmu_bat_para4 ---battery indication at 3.41V
;pmu_bat_para5 ---battery indication at 3.48V
;pmu_bat_para6 ---battery indication at 3.52V
;pmu_bat_para7 ---battery indication at 3.55V
;pmu_bat_para8 ---battery indication at 3.57V
;pmu_bat_para9 ---battery indication at 3.59V
;pmu_bat_para10 ---battery indication at 3.61V
;pmu_bat_para11 ---battery indication at 3.63V
;pmu_bat_para12 ---battery indication at 3.64V
;pmu_bat_para13 ---battery indication at 3.66V
;pmu_bat_para14 ---battery indication at 3.7V
;pmu_bat_para15 ---battery indication at 3.73V
;pmu_bat_para16 ---battery indication at 3.77V
;pmu_bat_para17 ---battery indication at 3.78V
;pmu_bat_para18 ---battery indication at 3.8V
;pmu_bat_para19 ---battery indication at 3.82V
;pmu_bat_para20 ---battery indication at 3.84V
;pmu_bat_para21 ---battery indication at 3.85V
;pmu_bat_para22 ---battery indication at 3.87V
;pmu_bat_para23 ---battery indication at 3.91V
;pmu_bat_para24 ---battery indication at 3.94V
;pmu_bat_para25 ---battery indication at 3.98V
;pmu_bat_para26 ---battery indication at 4.01V
;pmu_bat_para27 ---battery indication at 4.05V
;pmu_bat_para28 ---battery indication at 4.08V
;pmu_bat_para29 ---battery indication at 4.1V
;pmu_bat_para30 ---battery indication at 4.12V
;pmu_bat_para31 ---battery indication at 4.14V
;pmu_bat_para32 ---battery indication at 4.15V
;pmu_usbvol_limit ---set usb-ac limited voltage enable,1:enableЈ¬0Јєdisable
;pmu_usbcur_limit ---set usb-ac limited current enable,1:enableЈ¬0Јєdisable
;pmu_usbvol ---set usb-ac limited voltage level,mV,4000/4100/4200/4300/4400/4500/4600/4700,0 - not limite
;pmu_usbcur ---set usb-ac limited current level,mA,500/900, 0 - not limite
;pmu_usbvol_pc ---set usb-pc limited voltage level,mV,4000/4100/4200/4300/4400/4500/4600/4700,0 - not limite
;pmu_usbcur_pc ---set usb-pc limited current level,mA,500/900, 0 - not limite
;pmu_pwroff_vol ---set protect voltage when system start up,mV,2600/2700/2800/2900/3000/3100/3200/3300
;pmu_pwron_vol ---set protect voltage after system start up,mV,2600/2700/2800/2900/3000/3100/3200/3300
;pmu_pekoff_time ---set pek off time,ms, 4000/6000/8000/10000
;pmu_pekoff_func ---set pek off func, 0:shutdown,1:restart
;pmu_pekoff_en ---set pek offlevel powerdown or not, 0:not powerdown,1:powerdown
;pmu_peklong_time ---set pek pek long irq time,ms,1000/1500/2000/2500
;pmu_pekon_time ---set pek on time,ms,128/1000/2000/3000
;pmu_pwrok_time ---set pmu pwrok delay time,ms,8/16/32/64
;pmu_battery_warning_level1 ---low power warning high level,5%-20%,1%/step
;pmu_battery_warning_level2 ---low power warning low level,0%-15%,1%/step
;pmu_restvol_time ---battery indicaton reflash time,30/60/120/
;pmu_ocv_cou_adjust_time ---ocv battery indication reflash time,60/120/30
;pmu_chgled_func ---CHGKED pin controlЈ¬0:controlled by pmu,1:controlled by Charger
;pmu_chgled_type ---CHGLED Type select when pmu_chgled_func=0,0:Type AЈ¬1ЈєType B
;pmu_vbusen_func ---N_VBUSEN function select,0:as an output,1:as an input
;pmu_reset ---when power key press longer than 16's,PMU reset or not.0:not reset 1:reset
;pmu_IRQ_wakeup ---press IRQ wakeup or not when sleep or power down.0:not wakeup 1:wakeup
;pmu_hot_shutdowm ---when PMU over temperature protect or not;0:disable 1:enable
;pmu_inshort ---ACIN and VBUS inshort or not by software;0:auto detect 1:inshort
;pmu_charge_ltf ---
;pmu_charge_htf ---
;pmu_discharge_ltf ---
;pmu_discharge_htf ---
;pmu_temp_para1 --- temp -25 voltage
;pmu_temp_para2 --- temp -15 voltage
;pmu_temp_para3 --- temp -10 voltage
;pmu_temp_para4 --- temp -5 voltage
;pmu_temp_para5 --- temp 0 voltage
;pmu_temp_para6 --- temp 5 voltage
;pmu_temp_para7 --- temp 10 voltage
;pmu_temp_para8 --- temp 20 voltage
;pmu_temp_para9 --- temp 30 voltage
;pmu_temp_para10 --- temp 40 voltage
;pmu_temp_para11 --- temp 45 voltage
;pmu_temp_para12 --- temp 50 voltage
;pmu_temp_para13 --- temp 55 voltage
;pmu_temp_para14 --- temp 60 voltage
;pmu_temp_para15 --- temp 70 voltage
;pmu_temp_para16 --- temp 80 voltage
;--------------------------------------------------------------------------------------------------------
[pmu1_para]
pmu_used = 1
pmu_twi_addr = 0x34
pmu_twi_id = 1
pmu_irq_id = 0
pmu_battery_rdc = 100
pmu_battery_cap = 0
pmu_batdeten = 1
pmu_runtime_chgcur = 900
pmu_earlysuspend_chgcur = 900
pmu_suspend_chgcur = 900
pmu_shutdown_chgcur = 900
pmu_init_chgvol = 4200
pmu_init_chgend_rate = 15
pmu_init_chg_enabled = 1
pmu_init_adc_freq = 800
pmu_init_adcts_freq = 800
pmu_init_chg_pretime = 70
pmu_init_chg_csttime = 720
pmu_batt_cap_correct = 1
pmu_bat_regu_en = 0

pmu_bat_para1 = 0
pmu_bat_para2 = 0
pmu_bat_para3 = 0
pmu_bat_para4 = 0
pmu_bat_para5 = 0
pmu_bat_para6 = 0
pmu_bat_para7 = 0
pmu_bat_para8 = 0
pmu_bat_para9 = 3
pmu_bat_para10 = 4
pmu_bat_para11 = 4
pmu_bat_para12 = 5
pmu_bat_para13 = 6
pmu_bat_para14 = 14
pmu_bat_para15 = 18
pmu_bat_para16 = 31
pmu_bat_para17 = 36
pmu_bat_para18 = 41
pmu_bat_para19 = 48
pmu_bat_para20 = 53
pmu_bat_para21 = 55
pmu_bat_para22 = 58
pmu_bat_para23 = 64
pmu_bat_para24 = 69
pmu_bat_para25 = 74
pmu_bat_para26 = 78
pmu_bat_para27 = 81
pmu_bat_para28 = 85
pmu_bat_para29 = 88
pmu_bat_para30 = 92
pmu_bat_para31 = 95
pmu_bat_para32 = 100

pmu_usbvol_limit = 0
pmu_usbcur_limit = 0
pmu_usbvol = 4000
pmu_usbcur = 0
pmu_usbvol_pc = 4400
pmu_usbcur_pc = 500
pmu_pwroff_vol = 3300
pmu_pwron_vol = 2600
pmu_pekoff_time = 8000
pmu_pekoff_func = 0
pmu_pekoff_en = 1
pmu_peklong_time = 1500
pmu_pekon_time = 1000
pmu_pwrok_time = 64
pmu_battery_warning_level1 = 14
pmu_battery_warning_level2 = 0
pmu_restvol_adjust_time = 60
pmu_ocv_cou_adjust_time = 60
pmu_chgled_func = 1
pmu_chgled_type = 0
pmu_vbusen_func = 1
pmu_reset = 0
pmu_IRQ_wakeup = 0
pmu_hot_shutdowm = 1
pmu_inshort = 0
power_start = 0

pmu_temp_enable = 0
pmu_charge_ltf = 2261
pmu_charge_htf = 388
pmu_discharge_ltf = 3200
pmu_discharge_htf = 237
pmu_temp_para1 = 7466
pmu_temp_para2 = 4480
pmu_temp_para3 = 3518
pmu_temp_para4 = 2786
pmu_temp_para5 = 2223
pmu_temp_para6 = 1788
pmu_temp_para7 = 1448
pmu_temp_para8 = 969
pmu_temp_para9 = 664
pmu_temp_para10 = 466
pmu_temp_para11 = 393
pmu_temp_para12 = 333
pmu_temp_para13 = 283
pmu_temp_para14 = 242
pmu_temp_para15 = 179
pmu_temp_para16 = 134

[pmu2_para]
pmu_used = 0
pmu_twi_addr = 0x34
pmu_twi_id = 1
pmu_irq_id = 0

[recovery_key]
key_min = 4
key_max = 12

;----------------------------------------------------------------------------------
; dvfs voltage-frequency table configuration
;
; extremity_freq(Hz): cpu extremity frequency when run benckmark or demo apk
; 1536MHz@1500mV with radiator, 1248MHz@1260mV without radiator
; max_freq: cpu maximum frequency, based on Hz, can not be more than 1008MHz
; min_freq: cpu minimum frequency, based on Hz, can not be less than 96MHz
;
; LV_count: count of LV_freq/LV_volt, must be < 16
;
; LV1: core vdd is 1.30v if cpu frequency is (1104Mhz, 1200Mhz]
; LV2: core vdd is 1.20v if cpu frequency is (1008Mhz, 1104Mhz]
; LV3: core vdd is 1.10v if cpu frequency is (816Mhz, 1008Mhz]
; LV4: core vdd is 1.00v if cpu frequency is (600Mhz, 816Mhz]
; LV5: core vdd is 0.90v if cpu frequency is (0Mhz, 600Mhz]
; LV6: core vdd is 0.90v if cpu frequency is (0Mhz, 600Mhz]
; LV7: core vdd is 0.90v if cpu frequency is (0Mhz, 600Mhz]
; LV8: core vdd is 0.90v if cpu frequency is (0Mhz, 600Mhz]
;
;----------------------------------------------------------------------------------
[dvfs_table]
extremity_freq = 1536000000
max_freq = 1008000000
min_freq = 60000000

LV_count = 8

LV1_freq = 1536000000
LV1_volt = 1580

LV2_freq = 1248000000
LV2_volt = 1420

LV3_freq = 1200000000
LV3_volt = 1320

LV4_freq = 1008000000
LV4_volt = 1220

LV5_freq = 816000000
LV5_volt = 1120

LV6_freq = 312000000
LV6_volt = 1040

LV7_freq = 0
LV7_volt = 1040

LV8_freq = 0
LV8_volt = 1040

;----------------------------------------------------------------------------------
;virtual device
;virtual device for pinctrl testing
;device have pin PA1 PA2
;----------------------------------------------------------------------------------
[Vdevice]
Vdevice_used = 1
Vdevice_0 = port:PA01<5><1><2><default>
Vdevice_1 = port:PA02<5><1><2><default>

;----------------------------------------------------------------------------------
;s_uart0 config parameters
;s_uart_used --s_uart0 whether used for arisc debugging
;----------------------------------------------------------------------------------
[s_uart0]
s_uart_used = 0
s_uart_tx = port:PL02<2><default><default><default>
s_uart_rx = port:PL03<2><default><default><default>

;----------------------------------------------------------------------------------
;s_rsb0 config parameters
;s_rsb_used --s_rsb0 whether used for arisc
;----------------------------------------------------------------------------------
[s_rsb0]
s_rsb_used = 1
s_rsb_sck = port:PL00<2><1><2><default>
s_rsb_sda = port:PL01<2><1><2><default>

[mali_para]
mali_used = 1
mali_clkdiv = 1
mali_extreme_freq = 600
mali_extreme_vol = 1400


;----------------------------------------------------------------------------------
; dram dvfs voltage-frequency table configuration
;
; LV_count: count of LV_freq/LV_volt
;
; LV1: core vdd is 1.1v if dram frequency is (360Mhz, 552Mhz]
; LV2: core vdd is 1.0v if dram frequency is ( 0Mhz, 360Mhz]
; LV3: core vdd is 1.0v if dram frequency is ( 0Mhz, 360Mhz]
;
;----------------------------------------------------------------------------------
[dram_dvfs_table]
LV_count = 3

LV1_freq = 552000000
LV1_volt = 1100

LV2_freq = 360000000
LV2_volt = 1000

LV3_freq = 0
LV3_volt = 1000
;----------------------------------------------------------------------------------
;charging_type config parameters
;charging_type 0:uboot charging, 1:android charging
;----------------------------------------------------------------------------------
[charging_type]
charging_type = 0
;----------------------------------------------------------------------------------
;leds config parameters
;leds_used 0:uboot charging, 1:android charging
;----------------------------------------------------------------------------------
[leds_para]
leds_used = 0
red_led =
red_led_active_low = 0
green_led =
green_led_active_low = 0
blue_led =
blue_led_active_low = 0

то что находиться в init.rc

import init.sun8i.usb.rc

on init
#See storage config details at http://source.android.com/tech/storage/
# mkdir /mnt/shell/emulated 0700 shell shell
# mkdir /storage/emulated 0555 root root

# export EXTERNAL_STORAGE /storage/emulated/legacy
# export EMULATED_STORAGE_SOURCE /mnt/shell/emulated
# export EMULATED_STORAGE_TARGET /storage/emulated
# export MEDIA_STORAGE /mnt/media/sdcard

# Support legacy paths
# symlink /storage/emulated/legacy /sdcard
# symlink /storage/emulated/legacy /mnt/sdcard
# symlink /storage/emulated/legacy /storage/sdcard0
# symlink /mnt/shell/emulated/0 /storage/emulated/legacy

export EXTERNAL_STORAGE /mnt/sdcard
mkdir /mnt/sdcard 0700 system system
symlink /mnt/sdcard /sdcard
symlink /mnt/sdcard /storage/sdcard0

mkdir /mnt/extsd 0700 system system
symlink /mnt/extsd /storage/extsd
symlink /mnt/sdcard /storage/sdcard1

mkdir /mnt/usbhost1 0700 system system
symlink /mnt/usbhost1 /storage/usbhost1
symlink /mnt/usbhost1 /storage/sdcard2

mount debugfs debugfs /sys/kernel/debug
mkdir /databk 0700 root system
# RDA add begin
on post-fs-data
mknod /dev/rdacombo c 194 0;
chmod 0666 /dev/rdacombo
chown system system /dev/rdacombo
setprop wifi.interface wlan0
# for store rda bt addresss
mkdir /data/misc/bluetooth 0777 bluetooth net_bt_stack
# wifi
mkdir /data/misc/bluedroid 0777 bluetooth net_bt_stack
mkdir /data/misc/wifi 0777 wifi wifi
mkdir /data/misc/wifi/sockets 0777 wifi wifi
mkdir /data/misc/wpa_supplicant 0777 wifi wifi
mkdir /data/misc/dhcp 0770 dhcp dhcp
chown dhcp dhcp /data/misc/dhcp
chown wifi wifi /data/misc/wifi
chmod 777 /data/misc/wifi/sockets
chmod 0660 /data/misc/wifi/wpa_supplicant.conf
# RDA add end

on early-fs
mount_all /fstab.sun8i
setprop ro.crypto.fuse_sdcard true
insmod /system/vendor/modules/disp.ko
insmod /system/vendor/modules/lcd.ko
insmod /system/vendor/modules/mali.ko
insmod /system/vendor/modules/leds-sunxi.ko

on post-fs-data
#mkdir /data/media 0770 media_rw media_rw
#mkdir /mnt/media/sdcard 0770 media_rw media_rw

on fs
format_userdata /dev/block/by-name/UDISK polaris
# radio related, such as imei.conf
mkdir /data/misc/radio 0777 system radio

# radio related, 3G Data Card
chmod 0751 /system/xbin/usb_modeswitch.sh
chmod 0751 /system/xbin/ppp/call-pppd
chmod 0751 /system/etc/ppp/ip-up
chmod 0751 /system/etc/ppp/ip-down
chown radio system /system/xbin/usb_modeswitch.sh
chown radio system /system/xbin/ppp/call-pppd
chown radio system /system/etc/ppp/ip-up
chown radio system /system/etc/ppp/ip-down

#insmod tp and keyboard gsensor
insmod /system/vendor/modules/sw-device.ko
insmod /system/vendor/modules/sunxi-keyboard.ko

#csi module
insmod /system/vendor/modules/videobuf-core.ko
insmod /system/vendor/modules/videobuf-dma-contig.ko
insmod /system/vendor/modules/cam_detect.ko
# insmod /system/vendor/modules/actuator.ko
# insmod /system/vendor/modules/ad5820_act.ko
insmod /system/vendor/modules/cci.ko
insmod /system/vendor/modules/vfe_os.ko
insmod /system/vendor/modules/vfe_subdev.ko
# insmod /system/vendor/modules/gc0308.ko
#insmod /system/vendor/modules/hi253.ko
insmod /system/vendor/modules/siv121d.ko
insmod /system/vendor/modules/vfe_v4l2.ko
insmod /system/vendor/modules/rda_fm_ctrl.ko


# bluetooth
# UART device
chmod 0660 /dev/ttyS1
chown bluetooth net_bt_stack /dev/ttyS1

# power up/down interface
chmod 0660 /sys/class/rfkill/rfkill0/state
chmod 0660 /sys/class/rfkill/rfkill0/type
chown bluetooth net_bt_stack /sys/class/rfkill/rfkill0/state
chown bluetooth net_bt_stack /sys/class/rfkill/rfkill0/type
write /sys/class/rfkill/rfkill0/state 0

# bluetooth LPM
chmod 0220 /proc/bluetooth/sleep/lpm
chmod 0220 /proc/bluetooth/sleep/btwrite
chown bluetooth net_bt_stack /proc/bluetooth/sleep/lpm
chown bluetooth net_bt_stack /proc/bluetooth/sleep/btwrite
# RDA add begin
# wifi & bt
chmod 0777 /dev/rdacombo
chmod 0777 /dev/ttyS1
chown bluetooth bluetooth /dev/ttyS1
chmod 0777 /dev/rfkill
chown bluetooth net_bt_stack /data/misc/bluetooth
chmod 0777 /dev/rdafmRadio
chmod 0777 /dev/FM
# RDA add end

#insmod usb ethernet
insmod /system/vendor/modules/asix.ko
insmod /system/vendor/modules/qf9700.ko
insmod /system/vendor/modules/mcs7830.ko
insmod /system/vendor/modules/rtl8150.ko

#enable ksm
write /sys/kernel/mm/ksm/pages_to_scan 100
write /sys/kernel/mm/ksm/sleep_millisecs 500
write /sys/kernel/mm/ksm/run 1

# ril related services
import init.sunxi.3gdongle.rc

#service logcat /system/bin/logcat -r 1000 -n 10 -v time -f /data/local/logcat.log
# class main

#logger service: logger [kernel|android|radio]
service logger_kernel /system/bin/logger.sh kernel
user root
disabled
service logger_android /system/bin/logger.sh android
user root
disabled
service logger_radio /system/bin/logger.sh radio
user root
disabled
on property:rw.logger=1
start logger_kernel
start logger_android
start logger_radio

# 1. realtek wifi service
# 1.1 realtek wifi sta service
#service wpa_supplicant /system/bin/logwrapper /system/bin/wpa_supplicant \
# -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \
# -O/data/misc/wifi/sockets \
# -e/data/misc/wifi/entropy.bin -g@android:wpa_wlan0
# # we will start as root and wpa_supplicant will switch to user wifi
# # after setting up the capabilities required for WEXT
# # user wifi
# # group wifi inet keystore
# class main
# socket wpa_wlan0 dgram 660 wifi wifi
# disabled
# oneshot

# 1.2 realtek wifi sta p2p concurrent service
#service p2p_supplicant /system/bin/logwrapper /system/bin/wpa_supplicant \
# -ip2p0 -Dnl80211 -c/data/misc/wifi/p2p_supplicant.conf \
# -e/data/misc/wifi/entropy.bin -N \
# -iwlan0 -Dnl80211 -c/data/misc/wifi/wpa_supplicant.conf \
# -O/data/misc/wifi/sockets \
# -g@android:wpa_wlan0
# class main
# socket wpa_wlan0 dgram 660 wifi wifi
# disabled
# oneshot
# 2.3 RDA wifi RDA5990/RDA5991 wpa_supplicant service
service wpa_supplicant /system/bin/logwrapper /system/bin/wpa_supplicant -dd -Dwext -iwlan0 -c/data/misc/wifi/wpa_supplicant.conf \
-g@android:wpa_wlan0
group system wifi inet keystore
socket wpa_wlan0 dgram 660 wifi wifi
disabled
oneshot
service dhcpcd_wlan0 /system/bin/logwrapper /system/bin/dhcpcd -A -dd
disabled
oneshot

# RDA add end

on property:sys.boot_completed=1
start ril-daemon
start u3gmonitor

#clouds ota service
service shcmd /system/bin/shell_cmd_service
class main

Файлы что тут написал такие как есть, то есть тут я ничего не менял. Интересно то, что какие то камеры написаны, но модули не указанны в загрузке.
Возможно есть какие то сервисы для включения камеры и может они тут не прописаны,возможно ошибки в название камер? Я точно не знаю, вероятно камеры как то зависят от модулей и надо просто что то редактировать? Но то что тут написано получилось именно с прошивки, созданной из nanda nandb nandc nandd nandg на которой раньше все работало.
Вообщем мои исследования пока что не привели к результату, камеры так и не работают. Блютуз молчит. Поэтому надеюсь на Вас, так как вы точно знаете, что делать. Спасибо.

[Blaze]

Здравствуйте!
Сброс до заводских установок не пробовали?
Из новой прошивки script.bin не пробовали сверять со script.bin, который в nanda Вашей резервной копии?

[ittnns]

Добрый вечер. Спасибо за то, что так быстро написали. Я пробовал сразу после прошивки устройства делать сброс, но ни чего не помогает.
Вы писали<< Из новой прошивки script.bin не пробовали сверять со script.bin, который в nanda Вашей резервной копии?>> Подскажите как именно? Спасибо.

Добавлено спустя 11 минут 16 секунд:
И еще , возможно это поможет, я пробовал,использовать plugin к Total Commander чтобы изучить файлы на планшете, но я нигде не нашел script.bin.Версия андройда 4.4.2. Спасибо.

[Blaze]

Вечер добрый!
nanda это bootloader.fex
Производим данное переименование, после чего bootloader.fex распаковываем в Porteus и забираем script.bin
Через plugin к Total Commander вы не найдете script.bin, так как он находится в загрузочной области.

[ZloyFenix]

Да. Пока что вернул назад в сервис. Пускай еще раз проверят USB. Сегодня-завтра отпишусь.

USB, к сожалению поднять так и не удалось.

[hooshi]

hello
thanks to good forum

when i packed the img of any A23 firmware the size of the packed file about 1.2GB while the original file that unpacked was have 700MB

of storage.

can say me which file is unusable and i can delete it form unpacked folder before do pack

thanks

[Blaze]

Hi hooshi. Welcome on the board!
On your screenshot the folder _iso because you don't used in imgRePacker this cheat code /noiso
For unpack need to use this cheat code

Код: Выделить всё

imgRePacker.exe /noiso /skip name_of_your_iso.img

For pack need to use this cheat code

Код: Выделить всё

imgRePacker.exe /noiso name_of_your_iso.img.dump

Thanks for your question.

Regards,
Blaze